[V3] usb/mtu3: power down device ip at setup

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Originally, when dr_mode is USB_DR_MODE_HOST, it didn't power down device ip,
so host ip sleep will fail at ssusb_host_disable.

Power down device ip at ssusb_host_setup.

Signed-off-by: Hsin-Yi, Wang <hsinyi@xxxxxxxxxxxx>
---
 drivers/usb/mtu3/mtu3_plat.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c
index 46551f6d16fd..792c420fd4ad 100644
--- a/drivers/usb/mtu3/mtu3_plat.c
+++ b/drivers/usb/mtu3/mtu3_plat.c
@@ -200,6 +200,13 @@ static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb)
 	mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
 	udelay(1);
 	mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST);
+
+	/*
+	 * device ip maybe poweron in LK/BROM stage before enter kernel stage;
+	 * power down device ip, otherwise ip-sleep will fail when works as host
+	 * only mode
+	 */
+	mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN);
 }
 
 /* ignore the error if the clock does not exist */
-- 
2.18.1




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux