FYI, the subject line should be [PATCH v3] (not just [V3]) On Wed, Nov 28, 2018 at 5:54 PM Hsin-Yi, Wang <hsinyi@xxxxxxxxxxxx> wrote: > > Originally, when dr_mode is USB_DR_MODE_HOST, it didn't power down device ip, > so host ip sleep will fail at ssusb_host_disable. > > Power down device ip at ssusb_host_setup. > > Signed-off-by: Hsin-Yi, Wang <hsinyi@xxxxxxxxxxxx> > --- Next time, add a changelog here (e.g. changes from v1: - ...). > drivers/usb/mtu3/mtu3_plat.c | 7 +++++++ > 1 file changed, 7 insertions(+) > > diff --git a/drivers/usb/mtu3/mtu3_plat.c b/drivers/usb/mtu3/mtu3_plat.c > index 46551f6d16fd..792c420fd4ad 100644 > --- a/drivers/usb/mtu3/mtu3_plat.c > +++ b/drivers/usb/mtu3/mtu3_plat.c > @@ -200,6 +200,13 @@ static void ssusb_ip_sw_reset(struct ssusb_mtk *ssusb) > mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); > udelay(1); > mtu3_clrbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL0, SSUSB_IP_SW_RST); > + > + /* > + * device ip maybe poweron in LK/BROM stage before enter kernel stage; I'd replace LK with a more generic "firmware" term. e.g. "device ip may be powered on in firmware/BROM stage before entering kernel stage;" > + * power down device ip, otherwise ip-sleep will fail when works as host s/works/working/ > + * only mode > + */ > + mtu3_setbits(ssusb->ippc_base, U3D_SSUSB_IP_PW_CTRL2, SSUSB_IP_DEV_PDN); > } > > /* ignore the error if the clock does not exist */ > -- > 2.18.1 > Thanks.
