> >> My board is currently off-tree so I can't send any patch for the > >> pinmux settings in devicetree. But I will send a patch with the > >> changes that should go to imx6qdl.dtsi, imx6sl.dtsi and imx6sx.dtsi. Though I > only tested on i.MX6S. > >> > > > > No, the changes are board level specific, you could not add it into SoC file. > > Not all changes are board specific. The HSIC-only host controllers can only be used > to interface with on-board chips via HSIC. So they need a "usb-nop-xceiv" dummy > PHY in all use cases. > > So if I understand this correctly this should be done in the SoCs dtsi files like in this > patch I just sent: [1]. > > Please also note that for i.MX7S this is already added in imx7s.dtsi: [2] > Oh, I have misunderstood your meaning, the [1] is needed since it is for SoC. I thought your board level changes (like pinctrl) would go into SoC dtsi file. If there are no more comments, I will send v2 next week, feel free to add your reviewed-by and tested-by tag, thanks. Peter > > [1]: > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flkml.org%2 > Flkml%2F2018%2F10%2F18%2F414&data=02%7C01%7Cpeter.chen%40nxp. > com%7C3c73fdf4ec98477da49308d634d78b39%7C686ea1d3bc2b4c6fa92cd99c5c > 301635%7C0%7C0%7C636754497687793991&sdata=aHhMhaj%2FbdTFu0B > qXi0loiBh%2BHzl%2F%2BTSw3txyjBSNLQ%3D&reserved=0 > [2]: > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fgithub.com > %2Ftorvalds%2Flinux%2Fblob%2Fmaster%2Farch%2Farm%2Fboot%2Fdts%2Fim > x7s.dtsi%23L88&data=02%7C01%7Cpeter.chen%40nxp.com%7C3c73fdf4ec9 > 8477da49308d634d78b39%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0% > 7C636754497687793991&sdata=7cVhAMQpWWYjGHjY8Xh2g0CG3jPaeG8X > 9K368AooQcc%3D&reserved=0
