On 18.10.18 10:48, Peter Chen wrote:
Thanks, Frieder, no more tests are needed.
You could send me your dts changes as patches, I will append it at my v2 patch
series.
My board is currently off-tree so I can't send any patch for the pinmux settings in
devicetree. But I will send a patch with the changes that should go to imx6qdl.dtsi,
imx6sl.dtsi and imx6sx.dtsi. Though I only tested on i.MX6S.
No, the changes are board level specific, you could not add it into SoC file.
Not all changes are board specific. The HSIC-only host controllers can
only be used to interface with on-board chips via HSIC. So they need a
"usb-nop-xceiv" dummy PHY in all use cases.
So if I understand this correctly this should be done in the SoCs dtsi
files like in this patch I just sent: [1].
Please also note that for i.MX7S this is already added in imx7s.dtsi: [2]
Thanks,
Frieder
[1]: https://lkml.org/lkml/2018/10/18/414
[2]:
https://github.com/torvalds/linux/blob/master/arch/arm/boot/dts/imx7s.dtsi#L88
