On Mon, 1 Oct 2018 12:45:01 -0700, Badhri Jagan Sridharan wrote: > During the initial connect to a non-pd port, sink would hard reset > twice before deeming that the port partner is non-pd. TCPM sets the > the charge path to false during the hard reset. This causes unnecessary > connects/disconnects of charge path and makes port take longer to > charge from the non-pd ports. Avoid this by not setting the charge path > to false unless the partner has already identified to be pd capable. > > When partner is a pd port, set the charge path to false in > SNK_HARD_RESET_SINK_OFF. Set the current limits to default value based > of CC pull up and resume the charge path when port enters > SNK_HARD_RESET_SINK_ON. > > Signed-off-by: Badhri Jagan Sridharan <badhri@xxxxxxxxxx> > > -------- > Changes in V3: > Rebase on top of usb-next > > Changes in V2: > Based on feedback of jackp@xxxxxxxxxxxxxx > - vsafe_5v_hard_reset flag from tcpc_config is removed > - Patch only differentiates between pd port partner and non-pd port > partner > > V1 version of the patch is here: > https://lkml.org/lkml/2018/9/14/11 > --- > drivers/usb/typec/tcpm/tcpm.c | 9 ++++++++- > 1 file changed, 8 insertions(+), 1 deletion(-) > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
