Hi John,
Please provide log with debug enabled configuration.
On 5/21/2018 11:41 PM, John Stultz wrote:
> On Mon, May 21, 2018 at 1:45 AM, Minas Harutyunyan
> <Minas.Harutyunyan@xxxxxxxxxxxx> wrote:
>> Hi John,
>>
>> On 5/19/2018 4:49 AM, John Stultz wrote:
>>> In 4.17-rc, commit 03ea6d6e9e1f ("usb: dwc2: Enable power down")
>>> caused the HiKey board to not correctly handle switching between
>>> usb-gadget and usb-host mode.
>>>
>>> Unplugging the OTG port would result in:
OTG port you mean MicroAB, Correct?
dwc2 driver loaded when some device connected to OTG port?
And below message printed after disconnect the device from OTG port?
>>> [ 42.240973] dwc2 f72c0000.usb: dwc2_restore_host_registers: no host registers to restore
>>> [ 42.249066] dwc2 f72c0000.usb: dwc2_host_exit_hibernation: failed to restore host registers
>>>
>>> And the USB-host ports would not function.
USB-host ports - you mean 2 USB A-ports, connected to TS3USB221 HUB?
Switching ports between OTG and Host ports via TS3USB221 Switch
performing automatically or by some SW tool?
>>>
>>> And plugging in the OTG port, we would see:
>>> [ 46.046557] WARNING: CPU: 3 PID: 6 at drivers/usb/dwc2/gadget.c:260 dwc2_hsotg_init_fifo+0x194/0x1a0
>>> [ 46.055761] CPU: 3 PID: 6 Comm: kworker/u16:0 Not tainted 4.17.0-rc5-00030-ge67da8c #231
>>> [ 46.055767] Hardware name: HiKey Development Board (DT)
>>> [ 46.055784] Workqueue: dwc2 dwc2_conn_id_status_change
>>> ...
>>>
>> Could you please send full log to debug.
>
> Full dmesg log attached.
>
> I unplugged the usb-otg port at 136
> and replugged it back in at 141
>
>
>>> p->uframe_sched = false;
>>> p->change_speed_quirk = true;
>>> + p->power_down = false;
>>
>> power_down declared as int, suggested to update as follow:
>> p->power_down = DWC2_POWER_DOWN_PARAM_NONE;
>>
>> This can be accepted as temporary solution until we will fully debug
>> hibernation feature for HiKey platform.
>
> Ok, will re-send with the suggested change above.
>
> thanks
> -john
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
