04.05.18 18:47, Alan Stern пише: > On Fri, 4 May 2018, Alan Stern wrote: > >> You can try using the usbreset program from here: >> >> https://marc.info/?l=linux-usb&m=144820655510812&w=2 >> >> That program wants the usbfs pathname of the hub instead of the sysfs >> path. So you would call it with >> >> usbreset /dev/bus/usb/001/DDD >> >> where DDD is the hub's device number. You can get this number by >> reading the /sys/bus/usb/devices/1-0/devnum file, but the value has to > Typo -- that should have been 1-9, not 1-0. > > Alan Stern > >> be zero-padded to three digits. >> >> The usbreset program will send a bus reset to the hub, which is >> stronger than a soft reinit but not as strong as unplugging it and then >> plugging it back in. >> >> Alan Stern Tried this too, still the same result. Sincerely, Nazar Mokrynskyi github.com/nazar-pc -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
