Re: [PATCH] usb:serial:optrion: fix dwm-158 3g modem interface

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 2018-04-23 at 14:14 +0700, Lars Melin wrote:
> On 4/23/2018 14:03, Giuseppe Lippolis wrote:
> > The dwm-158 interface 4 and 5 doesn't answer to the AT commands
> > and doesn't appears a option interface.
> > Tested on openwrt distribution (kernel 4.14 using the old blacklist
> > definitions).
> > 
> > Signed-off-by: Giuseppe Lippolis <giu.lippolis@xxxxxxxxx>
> > ---
> >   drivers/usb/serial/option.c | 3 ++-
> >   1 file changed, 2 insertions(+), 1 deletion(-)
> > 
> > diff --git a/drivers/usb/serial/option.c
> > b/drivers/usb/serial/option.c
> > index c3f252283ab9..f0c3612467a3 100644
> > --- a/drivers/usb/serial/option.c
> > +++ b/drivers/usb/serial/option.c
> > @@ -1911,7 +1911,8 @@ static const struct usb_device_id
> > option_ids[] = {
> >   	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d01, 0xff) },	
> > 		/* D-Link DWM-156 (variant) */
> >   	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d02, 0xff) },
> >   	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d03, 0xff) },
> > -	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) },	
> > 		/* D-Link DWM-158 */
> > +	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff),	
> > 		/* D-Link DWM-158 */
> > +	 .driver_info = RSVD(4) | RSVD(5) },
> >   	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d0e, 0xff) },	
> > 		/* D-Link DWM-157 C1 */
> >   	{ USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff),	
> > 		/* D-Link DWM-221 B1 */
> >   	  .driver_info = RSVD(4) },
> 
> Blacklisting interface 4 and 5 is correct because:
> 
> MI_00 D-Link Mobile Broadband Device  (cdc_ether)
> MI_02 D-Link HSPA+DataCard Diagnostics Interface (also ppp modem)
> MI_03 D-Link HSPA+DataCard NMEA Device
> MI_04 D-Link HSPA+DataCard Speech Port

Any idea what format this port speaks?  Some Huawei Qualcomm-based
devices still use a TTY driver but send/receive 16-bit 8000hz PCM audio
frames via a serial port.  If the D-Link does something similar, it may
still make sense to drive it via option.

> MI_05 D-Link HSPA+DataCard Debug Port

If it's FCCID KA2WM158B1 then it's a Qualcomm device, and this port may
be a DIAG port.  It should also be driven by option if that's the case.

I looked but couldn't find downloadable drivers for the DWM-158 so I
couldn't double-check myself.

Dan

> MI_06 USB Mass Storage Device
> 
> 
> rgds
> /Lars
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb"
> in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux