RE: [PATCH v4 10/13] usb: typec: tcpm: set cc for drp toggling attach

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi
> -----Original Message-----
> From: Mats Karrman [mailto:mats.dev.list@xxxxxxxxx]
> Sent: 2018年3月30日 5:19
> To: Jun Li <jun.li@xxxxxxx>; robh+dt@xxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx;
> heikki.krogerus@xxxxxxxxxxxxxxx; linux@xxxxxxxxxxxx
> Cc: a.hajda@xxxxxxxxxxx; shufan_lee@xxxxxxxxxxx; Peter Chen
> <peter.chen@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx;
> linux-usb@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>;
> devel@xxxxxxxxxxxxxxxxxxxx
> Subject: Re: [PATCH v4 10/13] usb: typec: tcpm: set cc for drp toggling attach
> 
> Hi Li,
> 
> On 03/28/2018 06:06 PM, Li Jun wrote:
> 
> > In case of drp toggling, we may need set correct cc value for role
> > control after attach as it may never been set.
> >
> > Signed-off-by: Li Jun <jun.li@xxxxxxx>
> > ---
> >  drivers/usb/typec/tcpm.c | 5 +++++
> >  1 file changed, 5 insertions(+)
> >
> > diff --git a/drivers/usb/typec/tcpm.c b/drivers/usb/typec/tcpm.c index
> > 218c230..72d4232 100644
> > --- a/drivers/usb/typec/tcpm.c
> > +++ b/drivers/usb/typec/tcpm.c
> > @@ -2126,6 +2126,7 @@ static void tcpm_reset_port(struct tcpm_port *port)
> >  	tcpm_set_attached_state(port, false);
> >  	port->try_src_count = 0;
> >  	port->try_snk_count = 0;
> > +	port->cc_req = 0;
> 
> I don't think it's OK to use "0" here. cc_req is an enum so why not use
> "|TYPEC_CC_OPEN"?|
> 

I will change to be TYPEC_CC_OPEN, also other place.

Li Jun
> >  }
> >
> >  static void tcpm_detach(struct tcpm_port *port) @@ -2361,6 +2362,8 @@
> > static void run_state_machine(struct tcpm_port *port)
> >  		break;
> >
> >  	case SRC_ATTACHED:
> > +		if (!port->cc_req)
> 
>         	if (port->cc_req == |TYPEC_CC_OPEN)|
> 
> > +			tcpm_set_cc(port, tcpm_rp_cc(port));
> >  		ret = tcpm_src_attach(port);
> >  		tcpm_set_state(port, SRC_UNATTACHED,
> >  			       ret < 0 ? 0 : PD_T_PS_SOURCE_ON); @@ -2531,6 +2534,8
> @@
> > static void run_state_machine(struct tcpm_port *port)
> >  		tcpm_set_state(port, SNK_UNATTACHED, PD_T_PD_DEBOUNCE);
> >  		break;
> >  	case SNK_ATTACHED:
> > +		if (!port->cc_req)
> 
> Ditto.
> 
> > +			tcpm_set_cc(port, TYPEC_CC_RD);
> >  		ret = tcpm_snk_attach(port);
> >  		if (ret < 0)
> >  			tcpm_set_state(port, SNK_UNATTACHED, 0);
> 
> // Mats
> 

��.n��������+%������w��{.n�����{���)��jg��������ݢj����G�������j:+v���w�m������w�������h�����٥




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux