Hi > -----Original Message----- > From: Heikki Krogerus [mailto:heikki.krogerus@xxxxxxxxxxxxxxx] > Sent: 2018年2月27日 19:03 > To: Jun Li <jun.li@xxxxxxx> > Cc: gregkh@xxxxxxxxxxxxxxxxxxx; robh+dt@xxxxxxxxxx; linux@xxxxxxxxxxxx; > a.hajda@xxxxxxxxxxx; mark.rutland@xxxxxxx; yueyao@xxxxxxxxxx; > Peter Chen <peter.chen@xxxxxxx>; garsilva@xxxxxxxxxxxxxx; > o_leveque@xxxxxxxxx; shufan_lee@xxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx; > devicetree@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx> > Subject: Re: [PATCH v2 03/12] staging: typec: tcpci: support port config > passed via dt > > Hi, > > On Mon, Feb 26, 2018 at 02:30:53PM +0000, Jun Li wrote: > > > > + child = of_get_child_by_name(tcpci->dev->of_node, "connector"); > > > > + if (!child) { > > > > + dev_err(tcpci->dev, "failed to get connector node.\n"); > > > > + return -EINVAL; > > > > + } > > > > > > Why do you need separate child node for the connector? You will > > > always have only one connector per tcpc, i.e. the tcpci already > > > represents the connector and all its capabilities. > > > > > This is my original idea, my understanding is Rob expects those > > properties should apply for a common usb connector node[1], that way I > > need add a child node for it, sorry I didn't make the dt-binding > > patches come first in this series, please see patch 10,11. > > > > [1] > > > https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpat > > > chwork.kernel.org%2Fpatch%2F10231447%2F&data=02%7C01%7Cjun.li%40 > nxp.co > > > m%7Ce37ed8b084374e241d2e08d57dd1b02a%7C686ea1d3bc2b4c6fa92cd9 > 9c5c30163 > > > 5%7C0%7C0%7C636553261972212376&sdata=hSNiAfXoTTzK3TjjkjWo7OJL7 > %2B3gDHT > > I8NO0FQviDd4%3D&reserved=0 > > But was the idea really to put properties like the TCPC capabilities under the > usb connector child node? That will force us to extract the same properties > in two different methods in every USB Type-C driver. One extracting them > from DT, and another from other FW interfaces and build-in properties. > > To avoid that, let's just expect to get these properties in the node for tcpc, > not the usb connector child. I misunderstood it's better to put typec props under connector node in all cases so we can have a unified typec description. As Rob comments that's only required for multiple connectors for one controller, not for simple connector like my case, I will put those props under tcpc node. Jun Li > > > Thanks, > > -- > heikki ?韬{.n?????%??檩??w?{.n???{炳???骅w* jg????????G??⒏ ⒎?:+v???????? ????＂??????
