Hi, Martin
Tested-by: Sean Wang <sean.wang@xxxxxxxxxxxx>
I've tested the series with U2 storage and U3 ethernet devices on both
boards MT7623 BPI-R2 and MT7622 RFB1 using xhci-mtk driver, they are
still working well.
Below is related logs for test devices probing
----
# [ 42.590356] usb 2-1: new SuperSpeed USB device number 2 using
xhci-mtk
[ 42.719883] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 42.726339] scsi host2: usb-storage 2-1:1.0
[ 43.815572] scsi 2:0:0:0: Direct-Access Kingston DataTraveler 3.0
PMAP PQ: 0 ANSI: 6
[ 44.792938] sd 2:0:0:0: [sda] 30728832 512-byte logical blocks: (15.7
GB/14.7 GiB)
[ 44.800658] sd 2:0:0:0: [sda] Write Protect is off
[ 44.805582] sd 2:0:0:0: [sda] No Caching mode page found
[ 44.810888] sd 2:0:0:0: [sda] Assuming drive cache: write through
----
# [ 134.270617] usb 2-1: new SuperSpeed USB device number 3 using
xhci-mtk
[ 134.664163] ax88179_178a 2-1:1.0 eth1: register 'ax88179_178a' at
usb-1a1c0000.usb-1, ASIX AX88179 USB 3.0 Gigabit Ethernet,
00:11:6b:68:4c:9e
On Sat, 2018-03-03 at 22:43 +0100, Martin Blumenstingl wrote:
> The new PHY wrapper is now wired up in the core HCD code. This means
> that PHYs are now controlled (initialized, enabled, disabled, exited)
> without requiring any host-driver specific code.
> Remove the custom USB PHY handling from the xhci-mtk driver as the core
> HCD code now handles this.
>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
> ---
> drivers/usb/host/xhci-mtk.c | 98 +--------------------------------------------
> 1 file changed, 2 insertions(+), 96 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
> index b0ab4d5e2751..7334da9e9779 100644
> --- a/drivers/usb/host/xhci-mtk.c
> +++ b/drivers/usb/host/xhci-mtk.c
> @@ -14,7 +14,6 @@
> #include <linux/mfd/syscon.h>
> #include <linux/module.h>
> #include <linux/of.h>
> -#include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> #include <linux/pm_runtime.h>
> #include <linux/regmap.h>
> @@ -352,62 +351,6 @@ static const struct xhci_driver_overrides xhci_mtk_overrides __initconst = {
>
> static struct hc_driver __read_mostly xhci_mtk_hc_driver;
>
> -static int xhci_mtk_phy_init(struct xhci_hcd_mtk *mtk)
> -{
> - int i;
> - int ret;
> -
> - for (i = 0; i < mtk->num_phys; i++) {
> - ret = phy_init(mtk->phys[i]);
> - if (ret)
> - goto exit_phy;
> - }
> - return 0;
> -
> -exit_phy:
> - for (; i > 0; i--)
> - phy_exit(mtk->phys[i - 1]);
> -
> - return ret;
> -}
> -
> -static int xhci_mtk_phy_exit(struct xhci_hcd_mtk *mtk)
> -{
> - int i;
> -
> - for (i = 0; i < mtk->num_phys; i++)
> - phy_exit(mtk->phys[i]);
> -
> - return 0;
> -}
> -
> -static int xhci_mtk_phy_power_on(struct xhci_hcd_mtk *mtk)
> -{
> - int i;
> - int ret;
> -
> - for (i = 0; i < mtk->num_phys; i++) {
> - ret = phy_power_on(mtk->phys[i]);
> - if (ret)
> - goto power_off_phy;
> - }
> - return 0;
> -
> -power_off_phy:
> - for (; i > 0; i--)
> - phy_power_off(mtk->phys[i - 1]);
> -
> - return ret;
> -}
> -
> -static void xhci_mtk_phy_power_off(struct xhci_hcd_mtk *mtk)
> -{
> - unsigned int i;
> -
> - for (i = 0; i < mtk->num_phys; i++)
> - phy_power_off(mtk->phys[i]);
> -}
> -
> static int xhci_mtk_ldos_enable(struct xhci_hcd_mtk *mtk)
> {
> int ret;
> @@ -488,8 +431,6 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> struct xhci_hcd *xhci;
> struct resource *res;
> struct usb_hcd *hcd;
> - struct phy *phy;
> - int phy_num;
> int ret = -ENODEV;
> int irq;
>
> @@ -529,16 +470,6 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> return ret;
> }
>
> - mtk->num_phys = of_count_phandle_with_args(node,
> - "phys", "#phy-cells");
> - if (mtk->num_phys > 0) {
> - mtk->phys = devm_kcalloc(dev, mtk->num_phys,
> - sizeof(*mtk->phys), GFP_KERNEL);
> - if (!mtk->phys)
> - return -ENOMEM;
> - } else {
> - mtk->num_phys = 0;
> - }
> pm_runtime_enable(dev);
> pm_runtime_get_sync(dev);
> device_enable_async_suspend(dev);
> @@ -596,23 +527,6 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> mtk->has_ippc = false;
> }
>
> - for (phy_num = 0; phy_num < mtk->num_phys; phy_num++) {
> - phy = devm_of_phy_get_by_index(dev, node, phy_num);
> - if (IS_ERR(phy)) {
> - ret = PTR_ERR(phy);
> - goto put_usb2_hcd;
> - }
> - mtk->phys[phy_num] = phy;
> - }
> -
> - ret = xhci_mtk_phy_init(mtk);
> - if (ret)
> - goto put_usb2_hcd;
> -
> - ret = xhci_mtk_phy_power_on(mtk);
> - if (ret)
> - goto exit_phys;
> -
> device_init_wakeup(dev, true);
>
> xhci = hcd_to_xhci(hcd);
> @@ -630,7 +544,7 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> dev_name(dev), hcd);
> if (!xhci->shared_hcd) {
> ret = -ENOMEM;
> - goto power_off_phys;
> + goto disable_device_wakeup;
> }
>
> ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
> @@ -653,13 +567,9 @@ static int xhci_mtk_probe(struct platform_device *pdev)
> xhci_mtk_sch_exit(mtk);
> usb_put_hcd(xhci->shared_hcd);
>
> -power_off_phys:
> - xhci_mtk_phy_power_off(mtk);
> +disable_device_wakeup:
> device_init_wakeup(dev, false);
>
> -exit_phys:
> - xhci_mtk_phy_exit(mtk);
> -
> put_usb2_hcd:
> usb_put_hcd(hcd);
>
> @@ -682,8 +592,6 @@ static int xhci_mtk_remove(struct platform_device *dev)
> struct xhci_hcd *xhci = hcd_to_xhci(hcd);
>
> usb_remove_hcd(xhci->shared_hcd);
> - xhci_mtk_phy_power_off(mtk);
> - xhci_mtk_phy_exit(mtk);
> device_init_wakeup(&dev->dev, false);
>
> usb_remove_hcd(hcd);
> @@ -718,7 +626,6 @@ static int __maybe_unused xhci_mtk_suspend(struct device *dev)
> del_timer_sync(&xhci->shared_hcd->rh_timer);
>
> xhci_mtk_host_disable(mtk);
> - xhci_mtk_phy_power_off(mtk);
> xhci_mtk_clks_disable(mtk);
> usb_wakeup_set(mtk, true);
> return 0;
> @@ -732,7 +639,6 @@ static int __maybe_unused xhci_mtk_resume(struct device *dev)
>
> usb_wakeup_set(mtk, false);
> xhci_mtk_clks_enable(mtk);
> - xhci_mtk_phy_power_on(mtk);
> xhci_mtk_host_enable(mtk);
>
> xhci_dbg(xhci, "%s: restart port polling\n", __func__);
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
