Hi all
I am currently using two multi-bay USB-SATA3 enclosure with JMicron
JMS537 chipset 152d:0567
They are an Orico 9558ru3 and an Orico ns500rc3
According to the USB info they both use the JMS567 USBtoSATA bridge, I
cannot tell anything about the NS500rc3 SATA multiport chipset, while
the 9558ru3 is the JMB394
The firmware is different for sure
The strange thing here is that 9558ru3 goes in UAS mode (but it has
some problem already reported in the mainling list) unless I add the
quirks to modprobe.d, while the ns500rc3 silently stay in usb-storage
even if there are no quirks in modprobe.d
So somehow the usb-storage decides to turn off UAS for the ns500rc3
but the decision is clearly not taken on the vid:pid, and I would like
to understand how
Attached the dmesg without any quirks
The only suspecting row I can see is:
[ 3.894937] usb-storage 2-1.1:1.0: Quirks match for vid 152d pid
0567: 5000000
and here the usb info
menion@Menionubuntu:~$ lsusb
Bus 002 Device 005: ID 152d:0567 JMicron Technology Corp. / JMicron
USA Technology Corp. JMS567 SATA 6Gb/s bridge
Bus 002 Device 004: ID 1058:107c Western Digital Technologies, Inc.
Elements Desktop (WDBWLG)
Bus 002 Device 003: ID 152d:0567 JMicron Technology Corp. / JMicron
USA Technology Corp. JMS567 SATA 6Gb/s bridge
Bus 002 Device 002: ID 05e3:0612 Genesys Logic, Inc.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 0bda:2838 Realtek Semiconductor Corp. RTL2838 DVB-T
Bus 001 Device 003: ID 0681:0101 Siemens Information and Communication Products
Bus 001 Device 004: ID 1058:1021 Western Digital Technologies, Inc.
Elements Desktop (WDBAAU)
Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
menion@Menionubuntu:~$ lsusb -t
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/6p, 5000M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
|__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
|__ Port 2: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
|__ Port 4: Dev 5, If 0, Class=Mass Storage, Driver=uas, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/7p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
|__ Port 3: Dev 4, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 2: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 3: Dev 5, If 0, Class=Vendor Specific Class,
Driver=dvb_usb_rtl28xxu, 480M
|__ Port 3: Dev 5, If 1, Class=Vendor Specific Class, Driver=, 480M
menion@Menionubuntu:~$ dmesg
[ 0.000000] Linux version 4.15.5-041505-generic (kernel@gloin) (gcc version 7.2.0 (Ubuntu 7.2.0-8ubuntu3.2)) #201802221031 SMP Thu Feb 22 15:32:28 UTC 2018
[ 0.000000] Command line: BOOT_IMAGE=/@/boot/vmlinuz-4.15.5-041505-generic root=UUID=6db4baf7-fda8-41ac-a6ad-1ca7b083430f ro rootflags=subvol=@
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: x87 FPU will use FXSAVE
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000008f000-0x000000000008ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000090000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007b631fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b632000-0x000000007b661fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b662000-0x000000007b685fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b686000-0x000000007b76bfff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007b76c000-0x000000007ba20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ba21000-0x000000007ba71fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007ba72000-0x000000007ba76fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ba77000-0x000000007ba77fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ba78000-0x000000007ba7afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ba7b000-0x000000007ba7bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007ba7c000-0x000000007bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000feafffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed06000-0x00000000fed06fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed09fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fedbffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ESRT=0x7b660000 ACPI=0x7b6ca000 ACPI 2.0=0x7b6ca000 SMBIOS=0x7ba1f198
[ 0.000000] random: fast init done
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: AZW Z83 II/Cherry Trail CR, BIOS YB1007 08/17/2017
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 2 base 07D000000 mask FFF000000 uncachable
[ 0.000000] 3 base 07C800000 mask FFF800000 uncachable
[ 0.000000] 4 base 07C400000 mask FFFC00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] total RAM covered: 1988M
[ 0.000000] Found optimal setting for mtrr clean up
[ 0.000000] gran_size: 64K chunk_size: 64M num_reg: 5 lose cover RAM: 0G
[ 0.000000] esrt: ESRT header is not in the memory map.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ (ptrval)] 98000 size 24576
[ 0.000000] BRK [0x5013a000, 0x5013afff] PGTABLE
[ 0.000000] BRK [0x5013b000, 0x5013bfff] PGTABLE
[ 0.000000] BRK [0x5013c000, 0x5013cfff] PGTABLE
[ 0.000000] BRK [0x5013d000, 0x5013dfff] PGTABLE
[ 0.000000] BRK [0x5013e000, 0x5013efff] PGTABLE
[ 0.000000] BRK [0x5013f000, 0x5013ffff] PGTABLE
[ 0.000000] BRK [0x50140000, 0x50140fff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x320fc000-0x35075fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007B6CA000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000007B6CA0A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007B6E5B88 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000007B6CA200 01B982 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x000000007B76BF80 000040
[ 0.000000] ACPI: APIC 0x000000007B6E5C98 000084 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007B6E5D20 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007B6E5D68 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007B6E5E08 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 0x000000007B6E5E48 0041AE (v01 DptfTb DptfTab 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007B6E9FF8 00050C (v01 CpuDpf CpuDptf 00001000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007B6EA508 000058 (v01 LowPM LowPwrM 00001000 INTL 20120913)
[ 0.000000] ACPI: UEFI 0x000000007B6EA560 000042 (v01 ALASKA A M I 00000000 00000000)
[ 0.000000] ACPI: HPET 0x000000007B6EA5A8 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000007B6EA5E0 000763 (v01 PmRef CpuPm 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007B6EAD48 000292 (v01 PmRef Cpu0Tst 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007B6EAFE0 00017A (v01 PmRef ApTst 00003000 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x000000007B6EB160 00043A (v01 Intel_ Tpm2Tabl 00001000 INTL 20120913)
[ 0.000000] ACPI: TPM2 0x000000007B6EB5A0 000034 (v03 00000000 00000000)
[ 0.000000] ACPI: LPIT 0x000000007B6EB5D8 000104 (v01 ALASKA A M I 00000005 MSFT 0100000D)
[ 0.000000] ACPI: BCFG 0x000000007B6EB6E0 000139 (v01 INTEL BATTCONF 00000001 INTL 00000000)
[ 0.000000] ACPI: PRAM 0x000000007B6EB820 000030 (v01 00000001 00000000)
[ 0.000000] ACPI: CSRT 0x000000007B6EB850 00014C (v00 INTEL LANFORDC 00000005 MSFT 0100000D)
[ 0.000000] ACPI: WDAT 0x000000007B6EB9A0 000104 (v01 00000000 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000007bffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x7b33b000-0x7b365fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x000000007bffffff]
[ 0.000000] Normal empty
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008efff]
[ 0.000000] node 0: [mem 0x0000000000090000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x000000007b631fff]
[ 0.000000] node 0: [mem 0x000000007b662000-0x000000007b685fff]
[ 0.000000] node 0: [mem 0x000000007ba72000-0x000000007ba76fff]
[ 0.000000] node 0: [mem 0x000000007ba78000-0x000000007ba7afff]
[ 0.000000] node 0: [mem 0x000000007ba7c000-0x000000007bffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000007bffffff]
[ 0.000000] On node 0 totalpages: 506238
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 7872 pages used for memmap
[ 0.000000] DMA32 zone: 502242 pages, LIFO batch:31
[ 0.000000] Reserved but unavailable: 98 pages
[ 0.000000] Reserving Intel graphics memory at 0x000000007cc00000-0x000000007ebfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0008f000-0x0008ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b632000-0x7b661fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b686000-0x7b76bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b76c000-0x7ba20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ba21000-0x7ba71fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ba77000-0x7ba77fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ba7b000-0x7ba7bfff]
[ 0.000000] e820: [mem 0x7ec00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 46 pages/cpu @ (ptrval) s151552 r8192 d28672 u524288
[ 0.000000] pcpu-alloc: s151552 r8192 d28672 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 498280
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/@/boot/vmlinuz-4.15.5-041505-generic root=UUID=6db4baf7-fda8-41ac-a6ad-1ca7b083430f ro rootflags=subvol=@
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 1868836K/2024952K available (12300K kernel code, 2469K rwdata, 4196K rodata, 2392K init, 2416K bss, 156116K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 39045 entries in 153 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] ACPI: Core revision 20170831
[ 0.000000] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.020000] tsc: Detected 1440.000 MHz processor
[ 0.020000] Calibrating delay loop (skipped), value calculated using timer frequency.. 2880.00 BogoMIPS (lpj=5760000)
[ 0.020000] pid_max: default: 32768 minimum: 301
[ 0.020000] Security Framework initialized
[ 0.020000] Yama: becoming mindful.
[ 0.020000] AppArmor: AppArmor initialized
[ 0.020000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.020000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.020000] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.020000] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.024462] CPU: Physical Processor ID: 0
[ 0.024476] CPU: Processor Core ID: 0
[ 0.024494] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.024502] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.024529] mce: CPU supports 6 MCE banks
[ 0.024551] CPU0: Thermal monitoring enabled (TM1)
[ 0.024565] process: using mwait in idle threads
[ 0.024579] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.024588] Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
[ 0.024599] Spectre V2 : Mitigation: Full generic retpoline
[ 0.024991] Freeing SMP alternatives memory: 36K
[ 0.033722] TSC deadline timer enabled
[ 0.033733] smpboot: CPU0: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz (family: 0x6, model: 0x4c, stepping: 0x4)
[ 0.034041] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, 8-deep LBR, full-width counters, Intel PMU driver.
[ 0.034095] ... version: 3
[ 0.034103] ... bit width: 40
[ 0.034110] ... generic registers: 2
[ 0.034116] ... value mask: 000000ffffffffff
[ 0.034122] ... max period: 0000007fffffffff
[ 0.034128] ... fixed-purpose events: 3
[ 0.034133] ... event mask: 0000000700000003
[ 0.034271] Hierarchical SRCU implementation.
[ 0.036000] smp: Bringing up secondary CPUs ...
[ 0.036000] x86: Booting SMP configuration:
[ 0.036000] .... node #0, CPUs: #1
[ 0.036000] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.036415] #2 #3
[ 0.036579] smp: Brought up 1 node, 4 CPUs
[ 0.036579] smpboot: Max logical packages: 1
[ 0.036579] smpboot: Total of 4 processors activated (11520.00 BogoMIPS)
[ 0.037612] devtmpfs: initialized
[ 0.037612] x86/mm: Memory block size: 128MB
[ 0.040671] evm: security.selinux
[ 0.040681] evm: security.SMACK64
[ 0.040686] evm: security.SMACK64EXEC
[ 0.040691] evm: security.SMACK64TRANSMUTE
[ 0.040699] evm: security.SMACK64MMAP
[ 0.040706] evm: security.apparmor
[ 0.040712] evm: security.ima
[ 0.040717] evm: security.capability
[ 0.040775] PM: Registering ACPI NVS region [mem 0x0008f000-0x0008ffff] (4096 bytes)
[ 0.040775] PM: Registering ACPI NVS region [mem 0x7b686000-0x7b76bfff] (942080 bytes)
[ 0.040775] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.040775] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.040775] pinctrl core: initialized pinctrl subsystem
[ 0.040775] RTC time: 10:26:43, date: 02/26/18
[ 0.040937] NET: Registered protocol family 16
[ 0.041200] audit: initializing netlink subsys (disabled)
[ 0.041235] audit: type=2000 audit(1519640803.040:1): state=initialized audit_enabled=0 res=1
[ 0.041235] cpuidle: using governor ladder
[ 0.041235] cpuidle: using governor menu
[ 0.041235] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.041235] ACPI: bus type PCI registered
[ 0.041235] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.041235] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.041235] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.041235] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000) (size reduced!)
[ 0.041235] PCI: Using configuration type 1 for base access
[ 0.048037] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.048336] ACPI: Added _OSI(Module Device)
[ 0.048349] ACPI: Added _OSI(Processor Device)
[ 0.048356] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.048362] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.106468] ACPI: Dynamic OEM Table Load:
[ 0.106505] ACPI: SSDT 0xFFFF8A0ABA781000 00059C (v01 PmRef Cpu0Ist 00003000 INTL 20120913)
[ 0.107860] ACPI: Dynamic OEM Table Load:
[ 0.107882] ACPI: SSDT 0xFFFF8A0ABA7E1000 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.110152] ACPI: Dynamic OEM Table Load:
[ 0.110177] ACPI: SSDT 0xFFFF8A0ABA7DEE00 00015F (v01 PmRef ApIst 00003000 INTL 20120913)
[ 0.111247] ACPI: Dynamic OEM Table Load:
[ 0.111267] ACPI: SSDT 0xFFFF8A0AB980C240 00008D (v01 PmRef ApCst 00003000 INTL 20120913)
[ 0.119291] ACPI: Interpreter enabled
[ 0.119369] ACPI: (supports S0 S4 S5)
[ 0.119378] ACPI: Using IOAPIC for interrupt routing
[ 0.119511] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.124519] ACPI: Power Resource [P06X] (off)
[ 0.128045] ACPI: Power Resource [ID3C] (on)
[ 0.132509] ACPI: Power Resource [USBC] (on)
[ 0.134358] ACPI: Power Resource [WWPR] (off)
[ 0.135613] ACPI: Power Resource [WWPR] (off)
[ 0.137462] ACPI: Power Resource [WWPR] (off)
[ 0.138678] ACPI: Power Resource [WWPR] (off)
[ 0.139954] ACPI: Power Resource [WWPR] (off)
[ 0.141317] ACPI: Power Resource [WWPR] (off)
[ 0.169555] ACPI: Power Resource [CLK3] (on)
[ 0.169733] ACPI: Power Resource [CLK4] (on)
[ 0.189570] ACPI: Power Resource [CLK2] (on)
[ 0.190509] ACPI: Power Resource [CLK1] (on)
[ 0.194261] ACPI: Power Resource [CLK0] (on)
[ 0.194431] ACPI: Power Resource [CLK1] (on)
[ 0.198448] ACPI: Power Resource [P19X] (off)
[ 0.226044] ACPI: Power Resource [P28X] (off)
[ 0.226229] ACPI: Power Resource [P18X] (off)
[ 0.226391] ACPI: Power Resource [P12X] (off)
[ 0.226569] ACPI: Power Resource [P28P] (off)
[ 0.226730] ACPI: Power Resource [P18P] (off)
[ 0.226920] ACPI: Power Resource [P28T] (off)
[ 0.227086] ACPI: Power Resource [P18D] (off)
[ 0.227244] ACPI: Power Resource [P18T] (off)
[ 0.227413] ACPI: Power Resource [P3P3] (off)
[ 0.227582] ACPI: Power Resource [P12T] (off)
[ 0.227750] ACPI: Power Resource [P28W] (off)
[ 0.227917] ACPI: Power Resource [P18W] (off)
[ 0.228091] ACPI: Power Resource [P12W] (off)
[ 0.228259] ACPI: Power Resource [P33W] (off)
[ 0.228433] ACPI: Power Resource [P33X] (off)
[ 0.242362] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.242394] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.243578] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.243590] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.243652] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.246243] PCI host bridge to bus 0000:00
[ 0.246263] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.246273] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.246282] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.246291] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.246300] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.246310] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.246320] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff window]
[ 0.246330] pci_bus 0000:00: root bus resource [mem 0x20000000-0x201fffff window]
[ 0.246340] pci_bus 0000:00: root bus resource [mem 0x7cc00000-0x7ebfffff window]
[ 0.246350] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
[ 0.246362] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.246390] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[ 0.247407] pci 0000:00:02.0: [8086:22b0] type 00 class 0x030000
[ 0.247444] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[ 0.247460] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.247472] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.248059] pci 0000:00:0b.0: [8086:22dc] type 00 class 0x118000
[ 0.248089] pci 0000:00:0b.0: reg 0x10: [mem 0x9153b000-0x9153bfff 64bit]
[ 0.248722] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[ 0.248761] pci 0000:00:14.0: reg 0x10: [mem 0x91500000-0x9150ffff 64bit]
[ 0.248872] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.249426] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[ 0.249457] pci 0000:00:1a.0: reg 0x10: [mem 0x91300000-0x913fffff]
[ 0.249471] pci 0000:00:1a.0: reg 0x14: [mem 0x91200000-0x912fffff]
[ 0.249578] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.250096] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[ 0.250246] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.250758] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[ 0.251550] pci 0000:01:00.0: [10ec:8168] type 00 class 0x020000
[ 0.251598] pci 0000:01:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.251638] pci 0000:01:00.0: reg 0x18: [mem 0x91404000-0x91404fff 64bit]
[ 0.251663] pci 0000:01:00.0: reg 0x20: [mem 0x91400000-0x91403fff 64bit pref]
[ 0.251818] pci 0000:01:00.0: supports D1 D2
[ 0.251822] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.264060] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.264082] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.264091] pci 0000:00:1c.0: bridge window [mem 0x91400000-0x914fffff]
[ 0.270955] acpi 80862288:00: Device [PWM1] is in always present list
[ 0.286068] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.286427] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.286767] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287104] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287450] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.287786] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.288131] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.288470] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.289076] acpi INT0002:00: Device [GPED] is in always present list
[ 0.299660] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.299660] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.299660] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.299660] vgaarb: loaded
[ 0.300382] SCSI subsystem initialized
[ 0.300503] libata version 3.00 loaded.
[ 0.300503] ACPI: bus type USB registered
[ 0.300503] usbcore: registered new interface driver usbfs
[ 0.300503] usbcore: registered new interface driver hub
[ 0.300503] usbcore: registered new device driver usb
[ 0.513042] EDAC MC: Ver: 3.0.0
[ 0.513042] Registered efivars operations
[ 0.516915] PCI: Using ACPI for IRQ routing
[ 0.518817] PCI: pci_cache_line_size set to 64 bytes
[ 0.518884] e820: reserve RAM buffer [mem 0x0008f000-0x0008ffff]
[ 0.518889] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.518891] e820: reserve RAM buffer [mem 0x7b632000-0x7bffffff]
[ 0.518894] e820: reserve RAM buffer [mem 0x7b686000-0x7bffffff]
[ 0.518897] e820: reserve RAM buffer [mem 0x7ba77000-0x7bffffff]
[ 0.518901] e820: reserve RAM buffer [mem 0x7ba7b000-0x7bffffff]
[ 0.520112] NetLabel: Initializing
[ 0.520121] NetLabel: domain hash size = 128
[ 0.520127] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.520181] NetLabel: unlabeled traffic allowed by default
[ 0.520251] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.520251] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.522205] clocksource: Switched to clocksource hpet
[ 0.555658] VFS: Disk quotas dquot_6.6.0
[ 0.555725] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.556095] AppArmor: AppArmor Filesystem Enabled
[ 0.556242] pnp: PnP ACPI init
[ 0.556841] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.556857] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.556866] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 0.556891] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.557199] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.569003] system 00:02: [mem 0x91539000-0x91539fff] has been reserved
[ 0.569020] system 00:02: [mem 0x91537000-0x91537fff] has been reserved
[ 0.569030] system 00:02: [mem 0x91535000-0x91535fff] has been reserved
[ 0.569040] system 00:02: [mem 0x91524000-0x91524fff] has been reserved
[ 0.569049] system 00:02: [mem 0x91522000-0x91522fff] has been reserved
[ 0.569059] system 00:02: [mem 0x91520000-0x91520fff] has been reserved
[ 0.569068] system 00:02: [mem 0x9151e000-0x9151efff] has been reserved
[ 0.569078] system 00:02: [mem 0x9151c000-0x9151cfff] has been reserved
[ 0.569087] system 00:02: [mem 0x9151a000-0x9151afff] has been reserved
[ 0.569097] system 00:02: [mem 0x91518000-0x91518fff] has been reserved
[ 0.569106] system 00:02: [mem 0x91533000-0x91533fff] has been reserved
[ 0.569116] system 00:02: [mem 0x91531000-0x91531fff] has been reserved
[ 0.569126] system 00:02: [mem 0x9152f000-0x9152ffff] has been reserved
[ 0.569135] system 00:02: [mem 0x9152d000-0x9152dfff] has been reserved
[ 0.569145] system 00:02: [mem 0x9152b000-0x9152bfff] has been reserved
[ 0.569154] system 00:02: [mem 0x91529000-0x91529fff] has been reserved
[ 0.569164] system 00:02: [mem 0x91527000-0x91527fff] has been reserved
[ 0.569174] system 00:02: [mem 0x91525000-0x91525fff] has been reserved
[ 0.569194] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.569598] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.569611] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.569622] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.569632] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.569641] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.569651] system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
[ 0.569662] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
[ 0.569671] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.569681] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.569700] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.570435] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.573298] pnp: PnP ACPI: found 5 devices
[ 0.584865] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.584924] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.584942] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]
[ 0.584959] pci 0000:00:1c.0: bridge window [mem 0x91400000-0x914fffff]
[ 0.584983] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.584990] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.584994] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.584999] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.585004] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.585010] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.585015] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.585020] pci_bus 0000:00: resource 11 [mem 0x20000000-0x201fffff window]
[ 0.585024] pci_bus 0000:00: resource 12 [mem 0x7cc00000-0x7ebfffff window]
[ 0.585028] pci_bus 0000:00: resource 13 [mem 0x80000000-0xdfffffff window]
[ 0.585033] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.585036] pci_bus 0000:01: resource 1 [mem 0x91400000-0x914fffff]
[ 0.585792] NET: Registered protocol family 2
[ 0.586340] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.586448] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 0.586569] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.586706] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.586750] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[ 0.586904] NET: Registered protocol family 1
[ 0.586962] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.587678] PCI: CLS 64 bytes, default 64
[ 0.587836] Unpacking initramfs...
[ 2.432569] Freeing initrd memory: 48616K
[ 2.432720] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x14c1baf3789, max_idle_ns: 440795266465 ns
[ 2.432805] clocksource: Switched to clocksource tsc
[ 2.433073] Scanning for low memory corruption every 60 seconds
[ 2.434858] Initialise system trusted keyrings
[ 2.434904] Key type blacklist registered
[ 2.435008] workingset: timestamp_bits=36 max_order=19 bucket_order=0
[ 2.438884] zbud: loaded
[ 2.440360] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 2.440907] fuse init (API version 7.26)
[ 2.445377] Key type asymmetric registered
[ 2.445391] Asymmetric key parser 'x509' registered
[ 2.445521] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[ 2.445653] io scheduler noop registered
[ 2.445661] io scheduler deadline registered
[ 2.445811] io scheduler cfq registered (default)
[ 2.446911] pcieport 0000:00:1c.0: Signaling PME with IRQ 116
[ 2.447159] intel_idle: MWAIT substates: 0x33000020
[ 2.447164] intel_idle: v0.4.1 model 0x4C
[ 2.447596] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.447705] ACPI: AC: found native INT33F4 PMIC, not loading
[ 2.447882] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 2.447917] ACPI: Power Button [PWRB]
[ 2.448112] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.448193] ACPI: Power Button [PWRF]
[ 2.455918] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 2.456083] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.456094] ACPI: Thermal Zone [TZ00] (0 C)
[ 2.456257] ACPI: Battery: found native INT33F4 PMIC, not loading
[ 2.457261] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.477862] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.498662] Linux agpgart interface v0.103
[ 2.506775] loop: module loaded
[ 2.508042] libphy: Fixed MDIO Bus: probed
[ 2.508054] tun: Universal TUN/TAP device driver, 1.6
[ 2.508357] PPP generic driver version 2.4.2
[ 2.508940] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.508964] ehci-pci: EHCI PCI platform driver
[ 2.509005] ehci-platform: EHCI generic platform driver
[ 2.509076] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.509090] ohci-pci: OHCI PCI platform driver
[ 2.509119] ohci-platform: OHCI generic platform driver
[ 2.509150] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.509707] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.509732] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.510949] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01509810
[ 2.510974] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.511367] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.511380] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.511390] usb usb1: Product: xHCI Host Controller
[ 2.511400] usb usb1: Manufacturer: Linux 4.15.5-041505-generic xhci-hcd
[ 2.511408] usb usb1: SerialNumber: 0000:00:14.0
[ 2.512311] hub 1-0:1.0: USB hub found
[ 2.512357] hub 1-0:1.0: 7 ports detected
[ 2.514272] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.514294] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.514423] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.514434] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.514445] usb usb2: Product: xHCI Host Controller
[ 2.514455] usb usb2: Manufacturer: Linux 4.15.5-041505-generic xhci-hcd
[ 2.514463] usb usb2: SerialNumber: 0000:00:14.0
[ 2.515099] hub 2-0:1.0: USB hub found
[ 2.515135] hub 2-0:1.0: 6 ports detected
[ 2.515749] usb: port power management may be unreliable
[ 2.517048] i8042: PNP: No PS/2 controller found.
[ 2.518979] mousedev: PS/2 mouse device common for all mice
[ 2.521731] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.521837] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.521883] i2c /dev entries driver
[ 2.524437] device-mapper: uevent: version 1.0.3
[ 2.525471] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@xxxxxxxxxx
[ 2.525504] intel_pstate: Intel P-state driver initializing
[ 2.527563] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.527590] EFI Variables Facility v0.08 2004-May-17
[ 2.533607] NET: Registered protocol family 10
[ 2.546037] Segment Routing with IPv6
[ 2.546105] NET: Registered protocol family 17
[ 2.546218] Key type dns_resolver registered
[ 2.547557] RAS: Correctable Errors collector initialized.
[ 2.547642] microcode: sig=0x406c4, pf=0x1, revision=0x406
[ 2.547892] microcode: Microcode Update Driver: v2.2.
[ 2.547922] sched_clock: Marking stable (2547879834, 0)->(2533451950, 14427884)
[ 2.548492] registered taskstats version 1
[ 2.548520] Loading compiled-in X.509 certificates
[ 2.556773] Loaded X.509 cert 'Build time autogenerated kernel key: 2b50a2b0346ea9cc301c09e693b1782345ce7c07'
[ 2.556841] zswap: loaded using pool lzo/zbud
[ 2.569923] Key type big_key registered
[ 2.569943] Key type trusted registered
[ 2.578991] Key type encrypted registered
[ 2.579010] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.579019] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 2.579087] evm: HMAC attrs: 0x1
[ 2.598779] i2c_designware 808622C1:06: I2C bus managed by PUNIT
[ 2.612068] Magic number: 6:363:427
[ 2.612536] rtc_cmos 00:04: setting system clock to 2018-02-26 10:26:46 UTC (1519640806)
[ 2.612889] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.612897] EDD information not available.
[ 2.637057] Freeing unused kernel memory: 2392K
[ 2.637075] Write protecting the kernel read-only data: 20480k
[ 2.640122] Freeing unused kernel memory: 2008K
[ 2.652055] Freeing unused kernel memory: 1948K
[ 2.672243] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.672249] x86/mm: Checking user space page tables
[ 2.691953] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.852347] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[ 2.935327] sdhci: Secure Digital Host Controller Interface driver
[ 2.935344] sdhci: Copyright(c) Pierre Ossman
[ 2.956684] mmc0: SDHCI controller on ACPI [80860F14:00] using ADMA
[ 2.983657] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA
[ 3.002495] mmc2: SDHCI controller on ACPI [80860F14:03] using ADMA
[ 3.015161] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.015201] r8169 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.035644] r8169 0000:01:00.0 eth0: RTL8168g/8111g at 0x00000000064cfffd, 84:39:be:66:2f:68, XID 0c000880 IRQ 119
[ 3.035669] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.049542] SSE version of gcm_enc/dec engaged.
[ 3.060552] mmc0: new HS200 MMC card at address 0001
[ 3.093253] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.094834] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.096420] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.103676] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.107982] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
[ 3.113912] r8169 0000:01:00.0 enp1s0: renamed from eth0
[ 3.116222] [drm] Memory usable by graphics device = 2048M
[ 3.116243] [drm] Replacing VGA console driver
[ 3.116495] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 3.116505] [drm] Driver supports precise vblank timestamp query.
[ 3.120209] mmcblk0: mmc0:0001 DF4032 29.1 GiB
[ 3.120574] mmcblk0boot0: mmc0:0001 DF4032 partition 1 4.00 MiB
[ 3.120914] mmcblk0boot1: mmc0:0001 DF4032 partition 2 4.00 MiB
[ 3.121101] mmcblk0rpmb: mmc0:0001 DF4032 partition 3 4.00 MiB, chardev (243:0)
[ 3.126352] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 3.145752] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[ 3.147613] mmcblk0: p1 p2 p3
[ 3.149406] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 3.154240] acpi device:01: registered as cooling_device4
[ 3.155563] acpi device:02: registered as cooling_device5
[ 3.156924] acpi device:03: registered as cooling_device6
[ 3.158210] acpi device:04: registered as cooling_device7
[ 3.159520] acpi device:05: registered as cooling_device8
[ 3.160824] acpi device:06: registered as cooling_device9
[ 3.162140] acpi device:07: registered as cooling_device10
[ 3.163421] acpi device:08: registered as cooling_device11
[ 3.163610] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[ 3.164388] [drm] HDaudio controller not detected, using LPE audio instead
[ 3.210694] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[ 3.460820] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.482656] usb 2-1: New USB device found, idVendor=05e3, idProduct=0612
[ 3.482666] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.482674] usb 2-1: Product: USB3.0 Hub
[ 3.482680] usb 2-1: Manufacturer: GenesysLogic
[ 3.483678] hub 2-1:1.0: USB hub found
[ 3.483956] hub 2-1:1.0: 4 ports detected
[ 3.491735] usb 1-1: New USB device found, idVendor=05e3, idProduct=0610
[ 3.491752] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.491761] usb 1-1: Product: USB2.0 Hub
[ 3.491767] usb 1-1: Manufacturer: GenesysLogic
[ 3.493522] hub 1-1:1.0: USB hub found
[ 3.495294] hub 1-1:1.0: 4 ports detected
[ 3.632276] usb 1-2: new low-speed USB device number 3 using xhci_hcd
[ 3.753964] [drm] Cannot find any crtc or sizes
[ 3.785954] usb 1-2: New USB device found, idVendor=0681, idProduct=0101
[ 3.785973] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.860753] usb 2-1.1: new SuperSpeed USB device number 3 using xhci_hcd
[ 3.881888] usb 2-1.1: New USB device found, idVendor=152d, idProduct=0567
[ 3.881908] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.881920] usb 2-1.1: Product: USB to ATA/ATAPI Bridge
[ 3.881929] usb 2-1.1: Manufacturer: JMicron
[ 3.881936] usb 2-1.1: SerialNumber: 0123456789ABCDEF
[ 3.893009] usb-storage 2-1.1:1.0: USB Mass Storage device detected
[ 3.894937] usb-storage 2-1.1:1.0: Quirks match for vid 152d pid 0567: 5000000
[ 3.895493] scsi host0: usb-storage 2-1.1:1.0
[ 3.895723] usbcore: registered new interface driver usb-storage
[ 3.899429] usbcore: registered new interface driver uas
[ 3.960603] usb 1-1.3: new high-speed USB device number 4 using xhci_hcd
[ 4.066430] usb 1-1.3: New USB device found, idVendor=1058, idProduct=1021
[ 4.066478] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.066512] usb 1-1.3: Product: Ext HDD 1021
[ 4.066534] usb 1-1.3: Manufacturer: Western Digital
[ 4.066555] usb 1-1.3: SerialNumber: 5743415A4135323132363832
[ 4.068478] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 4.069098] scsi host1: usb-storage 1-1.3:1.0
[ 4.192610] usb 1-3: new high-speed USB device number 5 using xhci_hcd
[ 4.358505] usb 1-3: New USB device found, idVendor=0bda, idProduct=2838
[ 4.358525] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.358538] usb 1-3: Product: RTL2838UHIDIR
[ 4.358547] usb 1-3: Manufacturer: Realtek
[ 4.358554] usb 1-3: SerialNumber: 00000001
[ 4.384615] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.401722] usbcore: registered new interface driver usbhid
[ 4.401738] usbhid: USB HID core driver
[ 4.406689] input: HID 0681:0101 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:0681:0101.0001/input/input3
[ 4.425154] usb 2-1.2: new SuperSpeed USB device number 4 using xhci_hcd
[ 4.446509] usb 2-1.2: New USB device found, idVendor=1058, idProduct=107c
[ 4.446530] usb 2-1.2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 4.446543] usb 2-1.2: Product: Elements 107C
[ 4.446552] usb 2-1.2: Manufacturer: Western Digital
[ 4.446559] usb 2-1.2: SerialNumber: 5743433445334B5546395A45
[ 4.447612] usb-storage 2-1.2:1.0: USB Mass Storage device detected
[ 4.448356] scsi host2: usb-storage 2-1.2:1.0
[ 4.466701] hid-generic 0003:0681:0101.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0681:0101] on usb-0000:00:14.0-2/input0
[ 4.467274] input: HID 0681:0101 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.1/0003:0681:0101.0002/input/input4
[ 4.527699] hid-generic 0003:0681:0101.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0681:0101] on usb-0000:00:14.0-2/input1
[ 4.528168] usb 2-1.4: new SuperSpeed USB device number 5 using xhci_hcd
[ 4.551495] usb 2-1.4: New USB device found, idVendor=152d, idProduct=0567
[ 4.551516] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.551528] usb 2-1.4: Product: USB to ATA/ATAPI Bridge
[ 4.551536] usb 2-1.4: Manufacturer: JMicron
[ 4.551543] usb 2-1.4: SerialNumber: 0123456789ABCDEF
[ 4.558124] scsi host3: uas
[ 4.559740] scsi 3:0:0:0: Direct-Access JMicron Generic DISK00 0103 PQ: 0 ANSI: 6
[ 4.561032] scsi 3:0:0:1: Direct-Access JMicron Generic DISK01 0103 PQ: 0 ANSI: 6
[ 4.562096] scsi 3:0:0:2: Direct-Access JMicron Generic DISK02 0103 PQ: 0 ANSI: 6
[ 4.563170] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 4.563751] sd 3:0:0:1: Attached scsi generic sg1 type 0
[ 4.564185] sd 3:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 4.564198] sd 3:0:0:0: [sda] 4096-byte physical blocks
[ 4.564297] sd 3:0:0:2: Attached scsi generic sg2 type 0
[ 4.564431] sd 3:0:0:0: [sda] Write Protect is off
[ 4.564441] sd 3:0:0:0: [sda] Mode Sense: 4b 00 00 00
[ 4.564820] sd 3:0:0:0: [sda] Disabling FUA
[ 4.564842] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.566933] sd 3:0:0:2: [sdc] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 4.566951] sd 3:0:0:2: [sdc] 4096-byte physical blocks
[ 4.567143] sd 3:0:0:2: [sdc] Write Protect is off
[ 4.567153] sd 3:0:0:2: [sdc] Mode Sense: 4b 00 00 00
[ 4.567518] sd 3:0:0:2: [sdc] Disabling FUA
[ 4.567529] sd 3:0:0:2: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.569188] sd 3:0:0:1: [sdb] 488397168 512-byte logical blocks: (250 GB/233 GiB)
[ 4.569203] sd 3:0:0:1: [sdb] 4096-byte physical blocks
[ 4.569518] sd 3:0:0:1: [sdb] Write Protect is off
[ 4.569529] sd 3:0:0:1: [sdb] Mode Sense: 4b 00 00 00
[ 4.570341] sd 3:0:0:1: [sdb] Disabling FUA
[ 4.570350] sd 3:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.633744] sd 3:0:0:2: [sdc] Attached SCSI disk
[ 4.633806] sd 3:0:0:0: [sda] Attached SCSI disk
[ 4.635081] sd 3:0:0:1: [sdb] Attached SCSI disk
[ 4.926805] scsi 0:0:0:0: Direct-Access JMicron Generic DISK00 0103 PQ: 0 ANSI: 6
[ 4.927207] scsi 0:0:0:1: Direct-Access JMicron Generic DISK01 0103 PQ: 0 ANSI: 6
[ 4.927654] scsi 0:0:0:2: Direct-Access JMicron Generic DISK02 0103 PQ: 0 ANSI: 6
[ 4.928123] scsi 0:0:0:3: Direct-Access JMicron Generic DISK03 0103 PQ: 0 ANSI: 6
[ 4.928530] scsi 0:0:0:4: Direct-Access JMicron Generic DISK04 0103 PQ: 0 ANSI: 6
[ 4.929351] sd 0:0:0:0: Attached scsi generic sg3 type 0
[ 4.929391] sd 0:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
[ 4.929599] sd 0:0:0:0: [sdd] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[ 4.929609] sd 0:0:0:0: [sdd] 4096-byte physical blocks
[ 4.929850] sd 0:0:0:1: Attached scsi generic sg4 type 0
[ 4.929903] sd 0:0:0:0: [sdd] Write Protect is off
[ 4.929926] sd 0:0:0:0: [sdd] Mode Sense: 2b 00 00 00
[ 4.930296] sd 0:0:0:0: [sdd] No Caching mode page found
[ 4.930306] sd 0:0:0:0: [sdd] Assuming drive cache: write through
[ 4.930418] sd 0:0:0:1: [sde] Very big device. Trying to use READ CAPACITY(16).
[ 4.930784] sd 0:0:0:1: [sde] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[ 4.930795] sd 0:0:0:1: [sde] 4096-byte physical blocks
[ 4.930908] sd 0:0:0:2: [sdf] Very big device. Trying to use READ CAPACITY(16).
[ 4.931286] sd 0:0:0:1: [sde] Write Protect is off
[ 4.931295] sd 0:0:0:1: [sde] Mode Sense: 2b 00 00 00
[ 4.931482] sd 0:0:0:2: [sdf] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[ 4.931493] sd 0:0:0:2: [sdf] 4096-byte physical blocks
[ 4.931810] sd 0:0:0:1: [sde] No Caching mode page found
[ 4.931819] sd 0:0:0:1: [sde] Assuming drive cache: write through
[ 4.931853] sd 0:0:0:2: Attached scsi generic sg5 type 0
[ 4.932085] sd 0:0:0:2: [sdf] Write Protect is off
[ 4.932099] sd 0:0:0:2: [sdf] Mode Sense: 2b 00 00 00
[ 4.932536] sd 0:0:0:3: Attached scsi generic sg6 type 0
[ 4.933062] sd 0:0:0:2: [sdf] No Caching mode page found
[ 4.933075] sd 0:0:0:2: [sdf] Assuming drive cache: write through
[ 4.933372] sd 0:0:0:4: Attached scsi generic sg7 type 0
[ 4.933655] sd 0:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
[ 4.933984] sd 0:0:0:1: [sde] Very big device. Trying to use READ CAPACITY(16).
[ 4.934110] sd 0:0:0:3: [sdg] Very big device. Trying to use READ CAPACITY(16).
[ 4.934403] sd 0:0:0:4: [sdh] Very big device. Trying to use READ CAPACITY(16).
[ 4.934668] sd 0:0:0:2: [sdf] Very big device. Trying to use READ CAPACITY(16).
[ 4.934976] sd 0:0:0:3: [sdg] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[ 4.934990] sd 0:0:0:3: [sdg] 4096-byte physical blocks
[ 4.935504] sd 0:0:0:4: [sdh] 15628053168 512-byte logical blocks: (8.00 TB/7.28 TiB)
[ 4.935521] sd 0:0:0:4: [sdh] 4096-byte physical blocks
[ 4.936441] sd 0:0:0:3: [sdg] Write Protect is off
[ 4.936460] sd 0:0:0:3: [sdg] Mode Sense: 2b 00 00 00
[ 4.937507] sd 0:0:0:4: [sdh] Write Protect is off
[ 4.937528] sd 0:0:0:4: [sdh] Mode Sense: 2b 00 00 00
[ 4.938754] sd 0:0:0:3: [sdg] No Caching mode page found
[ 4.938778] sd 0:0:0:3: [sdg] Assuming drive cache: write through
[ 4.951712] sd 0:0:0:4: [sdh] No Caching mode page found
[ 4.951731] sd 0:0:0:4: [sdh] Assuming drive cache: write through
[ 4.965652] sd 0:0:0:3: [sdg] Very big device. Trying to use READ CAPACITY(16).
[ 4.966614] sd 0:0:0:4: [sdh] Very big device. Trying to use READ CAPACITY(16).
[ 4.969949] sd 0:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
[ 4.970188] sd 0:0:0:1: [sde] Very big device. Trying to use READ CAPACITY(16).
[ 4.971467] sd 0:0:0:2: [sdf] Very big device. Trying to use READ CAPACITY(16).
[ 4.977552] sd 0:0:0:0: [sdd] Attached SCSI disk
[ 4.978147] sd 0:0:0:1: [sde] Attached SCSI disk
[ 4.979257] sd 0:0:0:2: [sdf] Attached SCSI disk
[ 4.981809] sd 0:0:0:3: [sdg] Very big device. Trying to use READ CAPACITY(16).
[ 4.981930] sd 0:0:0:4: [sdh] Very big device. Trying to use READ CAPACITY(16).
[ 4.983503] sd 0:0:0:3: [sdg] Attached SCSI disk
[ 4.983784] sd 0:0:0:4: [sdh] Attached SCSI disk
[ 4.987857] random: crng init done
[ 5.086442] scsi 1:0:0:0: Direct-Access WD Ext HDD 1021 2021 PQ: 0 ANSI: 4
[ 5.087217] sd 1:0:0:0: Attached scsi generic sg8 type 0
[ 5.087632] sd 1:0:0:0: [sdi] 3907024896 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 5.089230] sd 1:0:0:0: [sdi] Write Protect is off
[ 5.089248] sd 1:0:0:0: [sdi] Mode Sense: 17 00 10 08
[ 5.090810] sd 1:0:0:0: [sdi] No Caching mode page found
[ 5.090822] sd 1:0:0:0: [sdi] Assuming drive cache: write through
[ 5.095481] sdi: sdi1 sdi2
[ 5.099704] sd 1:0:0:0: [sdi] Attached SCSI disk
[ 5.468938] scsi 2:0:0:0: Direct-Access WD Elements 107C 1065 PQ: 0 ANSI: 6
[ 5.469804] sd 2:0:0:0: Attached scsi generic sg9 type 0
[ 5.470029] sd 2:0:0:0: [sdj] 976746240 4096-byte logical blocks: (4.00 TB/3.64 TiB)
[ 5.470371] sd 2:0:0:0: [sdj] Write Protect is off
[ 5.470380] sd 2:0:0:0: [sdj] Mode Sense: 53 00 10 08
[ 5.470648] sd 2:0:0:0: [sdj] No Caching mode page found
[ 5.470657] sd 2:0:0:0: [sdj] Assuming drive cache: write through
[ 5.472156] sdj: sdj1
[ 5.473503] sd 2:0:0:0: [sdj] Attached SCSI disk
[ 5.992017] raid6: sse2x1 gen() 2544 MB/s
[ 6.060020] raid6: sse2x1 xor() 2049 MB/s
[ 6.128007] raid6: sse2x2 gen() 2737 MB/s
[ 6.196013] raid6: sse2x2 xor() 2272 MB/s
[ 6.264019] raid6: sse2x4 gen() 3907 MB/s
[ 6.332007] raid6: sse2x4 xor() 1504 MB/s
[ 6.332013] raid6: using algorithm sse2x4 gen() 3907 MB/s
[ 6.332018] raid6: .... xor() 1504 MB/s, rmw enabled
[ 6.332022] raid6: using ssse3x2 recovery algorithm
[ 6.336082] xor: measuring software checksum speed
[ 6.376394] prefetch64-sse: 6316.000 MB/sec
[ 6.416301] generic_sse: 5336.000 MB/sec
[ 6.416312] xor: using function: prefetch64-sse (6316.000 MB/sec)
[ 6.419595] async_tx: api initialized (async)
[ 6.553848] Btrfs loaded, crc32c=crc32c-intel
[ 7.359605] BTRFS: device fsid 931d40c6-7cd7-46f3-a4bf-61f3a53844bc devid 5 transid 5588 /dev/sdh
[ 7.360298] BTRFS: device fsid 931d40c6-7cd7-46f3-a4bf-61f3a53844bc devid 4 transid 5588 /dev/sdg
[ 7.360736] BTRFS: device fsid 931d40c6-7cd7-46f3-a4bf-61f3a53844bc devid 3 transid 5588 /dev/sdf
[ 7.361204] BTRFS: device fsid 931d40c6-7cd7-46f3-a4bf-61f3a53844bc devid 2 transid 5588 /dev/sde
[ 7.361654] BTRFS: device fsid 931d40c6-7cd7-46f3-a4bf-61f3a53844bc devid 1 transid 5588 /dev/sdd
[ 7.362154] BTRFS: device fsid ba1e0d88-2e26-499d-8fe3-458b9c53349a devid 2 transid 52906 /dev/sdb
[ 7.362572] BTRFS: device fsid ba1e0d88-2e26-499d-8fe3-458b9c53349a devid 1 transid 52906 /dev/sda
[ 7.362910] BTRFS: device fsid ba1e0d88-2e26-499d-8fe3-458b9c53349a devid 3 transid 52906 /dev/sdc
[ 7.363197] BTRFS: device fsid 6db4baf7-fda8-41ac-a6ad-1ca7b083430f devid 1 transid 102313 /dev/mmcblk0p3
[ 7.433367] BTRFS info (device mmcblk0p3): disk space caching is enabled
[ 7.433390] BTRFS info (device mmcblk0p3): has skinny extents
[ 7.453476] BTRFS info (device mmcblk0p3): enabling ssd optimizations
[ 7.900127] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[ 7.920776] systemd[1]: Detected architecture x86-64.
[ 7.927023] systemd[1]: Set hostname to <Menionubuntu>.
[ 8.228631] systemd[1]: Listening on LVM2 poll daemon socket.
[ 8.229180] systemd[1]: Listening on Journal Socket.
[ 8.229388] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 8.229600] systemd[1]: Listening on udev Control Socket.
[ 8.230112] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.232518] systemd[1]: Created slice User and Session Slice.
[ 8.233638] systemd[1]: Created slice System Slice.
[ 8.301797] 8021q: 802.1Q VLAN Support v1.8
[ 8.373562] Loading iSCSI transport class v2.0-870.
[ 8.439735] iscsi: registered transport (tcp)
[ 8.533692] RPC: Registered named UNIX socket transport module.
[ 8.533710] RPC: Registered udp transport module.
[ 8.533716] RPC: Registered tcp transport module.
[ 8.533721] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.577441] iscsi: registered transport (iser)
[ 8.661937] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 8.792718] BTRFS info (device mmcblk0p3): disk space caching is enabled
[ 8.859017] systemd-journald[487]: Received request to flush runtime journal from PID 1
[ 9.221429] soc_button_array ACPI0011:00: Unknown button index 4 upage 01 usage ca, ignoring
[ 9.227853] proc_thermal 0000:00:0b.0: enabling device (0000 -> 0002)
[ 9.229280] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 9.229404] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 9.288440] 8086228A:00: ttyS4 at MMIO 0x91521000 (irq = 39, base_baud = 2764800) is a 16550A
[ 9.288997] serial serial0: tty port ttyS4 registered
[ 9.318324] 8086228A:01: ttyS5 at MMIO 0x9151f000 (irq = 40, base_baud = 2764800) is a 16550A
[ 9.374970] Bluetooth: Core ver 2.22
[ 9.375020] NET: Registered protocol family 31
[ 9.375022] Bluetooth: HCI device and connection manager initialized
[ 9.375036] Bluetooth: HCI socket layer initialized
[ 9.375041] Bluetooth: L2CAP socket layer initialized
[ 9.375058] Bluetooth: SCO socket layer initialized
[ 9.387901] axp20x-i2c i2c-INT33F4:00: AXP20x variant AXP288 found
[ 9.399346] acpi INT33D5:00: intel-hid: created platform device
[ 9.420609] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[ 9.437333] axp20x-i2c i2c-INT33F4:00: AXP20X driver loaded
[ 9.441423] Bluetooth: HCI UART driver ver 2.3
[ 9.441429] Bluetooth: HCI UART protocol H4 registered
[ 9.441431] Bluetooth: HCI UART protocol BCSP registered
[ 9.441492] Bluetooth: HCI UART protocol LL registered
[ 9.441494] Bluetooth: HCI UART protocol ATH3K registered
[ 9.441495] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 9.441634] Bluetooth: HCI UART protocol Intel registered
[ 9.441712] Bluetooth: HCI UART protocol Broadcom registered
[ 9.441714] Bluetooth: HCI UART protocol QCA registered
[ 9.441716] Bluetooth: HCI UART protocol AG6XX registered
[ 9.441717] Bluetooth: HCI UART protocol Marvell registered
[ 9.442349] hci_uart_bcm serial0-0: BCM irq: 168
[ 9.458961] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input5
[ 9.459119] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input6
[ 9.459260] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=2 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input7
[ 9.460740] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[ 9.461939] input: Intel HID events as /devices/pci0000:00/INT33D5:00/input/input8
[ 9.491685] Bluetooth: hci0: BCM: failed to write clock (-56)
[ 9.491706] Bluetooth: hci0: Failed to set baudrate
[ 9.561175] intel_sst_acpi 808622A8:00: LPE base: 0x91000000 size:0x200000
[ 9.561180] intel_sst_acpi 808622A8:00: IRAM base: 0x910c0000
[ 9.561229] intel_sst_acpi 808622A8:00: DRAM base: 0x91100000
[ 9.561238] intel_sst_acpi 808622A8:00: SHIM base: 0x91140000
[ 9.561275] intel_sst_acpi 808622A8:00: Mailbox base: 0x91144000
[ 9.561284] intel_sst_acpi 808622A8:00: DDR base: 0x20000000
[ 9.563875] intel_sst_acpi 808622A8:00: Got drv data max stream 25
[ 9.588239] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.594146] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.608639] Bluetooth: hci0: BCM: chip id 107
[ 9.610977] Bluetooth: hci0: BCM: features 0x2f
[ 9.612467] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.624535] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[ 9.624548] cfg80211: failed to load regulatory.db
[ 9.634196] Bluetooth: hci0: BCM4345C0
[ 9.634209] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 9.780916] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
[ 9.869731] intel_rapl: Found RAPL domain package
[ 9.869736] intel_rapl: Found RAPL domain core
[ 9.877123] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 9.878748] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 9.880457] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 9.883347] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 9.886897] mmc1: queuing unknown CIS tuple 0x81 (9 bytes)
[ 9.959628] usb 1-3: dvb_usb_v2: found a 'Realtek RTL2832U reference design' in warm state
[ 9.994000] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43455-sdio.bin for chip 0x004345(17221) rev 0x000006
[ 9.994818] usbcore: registered new interface driver brcmfmac
[ 10.019954] usb 1-3: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 10.020077] dvbdev: DVB: registering new adapter (Realtek RTL2832U reference design)
[ 10.056172] i2c i2c-15: Added multiplexed i2c bus 16
[ 10.056181] rtl2832 15-0010: Realtek RTL2832 successfully attached
[ 10.056259] usb 1-3: DVB: registering adapter 0 frontend 0 (Realtek RTL2832 (DVB-T))...
[ 10.071339] r820t 16-001a: creating new instance
[ 10.078236] r820t 16-001a: Rafael Micro r820t successfully identified
[ 10.098643] media: Linux media interface: v0.10
[ 10.124739] Linux video capture interface: v2.00
[ 10.183973] rtl2832_sdr rtl2832_sdr.1.auto: Registered as swradio0
[ 10.183980] rtl2832_sdr rtl2832_sdr.1.auto: Realtek RTL2832 SDR attached
[ 10.183984] rtl2832_sdr rtl2832_sdr.1.auto: SDR API is still slightly experimental and functionality changes may follow
[ 10.259952] lirc_dev: IR Remote Control driver registered, major 239
[ 10.265524] IR LIRC bridge handler initialized
[ 10.266316] Registered IR keymap rc-empty
[ 10.266442] rc rc0: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0
[ 10.266534] input: Realtek RTL2832U reference design as /devices/pci0000:00/0000:00:14.0/usb1/1-3/rc/rc0/input9
[ 10.269895] lirc lirc0: lirc_dev: driver ir-lirc-codec (dvb_usb_rtl28xxu) registered at minor = 0
[ 10.269906] usb 1-3: dvb_usb_v2: schedule remote query interval to 200 msecs
[ 10.279140] usb 1-3: dvb_usb_v2: 'Realtek RTL2832U reference design' successfully initialized and connected
[ 10.327148] usbcore: registered new interface driver dvb_usb_rtl28xxu
[ 10.461265] Adding 1952764k swap on /dev/mmcblk0p2. Priority:-2 extents:1 across:1952764k SSFS
[ 10.871836] input: gpio-keys as /devices/platform/gpio-keys.0.auto/input/input10
[ 11.006297] r8169 0000:01:00.0 enp1s0: link down
[ 11.006303] r8169 0000:01:00.0 enp1s0: link down
[ 11.012170] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 11.060362] BTRFS info (device sdd): disk space caching is enabled
[ 11.060368] BTRFS info (device sdd): has skinny extents
[ 11.101654] bytcr_rt5651 bytcr_rt5651: quirk DMIC_MAP enabled
[ 11.101659] bytcr_rt5651 bytcr_rt5651: quirk DMIC enabled
[ 11.101661] bytcr_rt5651 bytcr_rt5651: quirk MCLK_EN enabled
[ 11.132092] bytcr_rt5651 bytcr_rt5651: snd-soc-dummy-dai <-> media-cpu-dai mapping ok
[ 11.132171] bytcr_rt5651 bytcr_rt5651: snd-soc-dummy-dai <-> deepbuffer-cpu-dai mapping ok
[ 11.132327] bytcr_rt5651 bytcr_rt5651: rt5651-aif1 <-> ssp2-port mapping ok
[ 11.134685] input: bytcr-rt5651 Headset as /devices/pci0000:00/808622A8:00/bytcr_rt5651/sound/card1/input11
[ 11.395998] axp288_fuel_gauge axp288_fuel_gauge: axp288 not configured by firmware
[ 14.070043] r8169 0000:01:00.0 enp1s0: link up
[ 14.070079] IPv6: ADDRCONF(NETDEV_CHANGE): enp1s0: link becomes ready
[ 14.090449] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.clm_blob failed with error -2
[ 14.090454] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available(err=-2), device may have limited channels available
[ 14.090870] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
[ 17.023063] Bluetooth: hci0: BCM: failed to write clock (-56)
[ 17.141005] Bluetooth: hci0: BCM (003.001.025) build 0230
[ 22.599937] audit: type=1400 audit(1519640826.479:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1419 comm="apparmor_parser"
[ 22.604586] audit: type=1400 audit(1519640826.487:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lxd/lxd-bridge-proxy" pid=1420 comm="apparmor_parser"
[ 22.612928] audit: type=1400 audit(1519640826.495:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=1421 comm="apparmor_parser"
[ 22.612940] audit: type=1400 audit(1519640826.495:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1421 comm="apparmor_parser"
[ 22.612946] audit: type=1400 audit(1519640826.495:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//snap_update_ns" pid=1421 comm="apparmor_parser"
[ 22.613454] audit: type=1400 audit(1519640826.495:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1418 comm="apparmor_parser"
[ 22.613464] audit: type=1400 audit(1519640826.495:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1418 comm="apparmor_parser"
[ 22.613472] audit: type=1400 audit(1519640826.495:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=1418 comm="apparmor_parser"
[ 22.613478] audit: type=1400 audit(1519640826.495:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1418 comm="apparmor_parser"
[ 22.614356] audit: type=1400 audit(1519640826.495:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/dhcpd" pid=1422 comm="apparmor_parser"
[ 22.867198] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.867204] Bluetooth: BNEP filters: protocol multicast
[ 22.867216] Bluetooth: BNEP socket layer initialized
[ 22.971108] new mount options do not match the existing superblock, will be ignored
[ 23.533344] vboxdrv: loading out-of-tree module taints kernel.
[ 23.534353] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[ 23.555708] vboxdrv: Found 4 processor cores
[ 23.577158] vboxdrv: TSC mode is Invariant, tentative frequency 1488339071 Hz
[ 23.577161] vboxdrv: Successfully loaded version 5.2.6 (interface 0x00290000)
[ 23.807249] VBoxNetFlt: Successfully started.
[ 23.812940] VBoxNetAdp: Successfully started.
[ 23.819128] VBoxPciLinuxInit
[ 23.826946] vboxpci: IOMMU not found (not registered)
[ 23.943071] IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready
[ 24.696687] SUPR0GipMap: fGetGipCpu=0xb
[ 24.951692] vboxdrv: 0000000000000000 VMMR0.r0
[ 25.044447] IPv6: ADDRCONF(NETDEV_UP): vboxnet0: link is not ready
[ 25.172916] VBoxNetFlt: attached to 'vboxnet0' / 0a:00:27:00:00:00
[ 25.172956] IPv6: ADDRCONF(NETDEV_CHANGE): vboxnet0: link becomes ready
[ 25.173358] device vboxnet0 entered promiscuous mode
[ 25.422783] vboxdrv: 0000000000000000 VBoxDDR0.r0
[ 25.474152] VBoxNetFlt: attached to 'enp1s0' / 84:39:be:66:2f:68
[ 25.476003] VBoxNetFlt: attached to 'tap0' / 00:06:5b:3c:55:c0
[ 25.476039] IPv6: ADDRCONF(NETDEV_CHANGE): tap0: link becomes ready
[ 25.525507] device enp1s0 entered promiscuous mode
[ 25.525637] device tap0 entered promiscuous mode
[ 25.558323] vboxdrv: 0000000000000000 VBoxEhciR0.r0
[ 28.870019] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 28.870063] NFSD: starting 90-second grace period (net f0000099)
[ 29.096453] kauditd_printk_skb: 6 callbacks suppressed
[ 29.096457] audit: type=1400 audit(1519640832.835:18): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/2047/status" pid=2047 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=112 ouid=112
[ 29.116776] audit: type=1400 audit(1519640832.855:19): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/sys/devices/system/node/" pid=2047 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=112 ouid=0
[ 29.117778] audit: type=1400 audit(1519640832.859:20): apparmor="DENIED" operation="open" profile="/usr/sbin/mysqld" name="/proc/2047/status" pid=2047 comm="mysqld" requested_mask="r" denied_mask="r" fsuid=112 ouid=112
[ 34.423418] php-fpm7.0[2365]: segfault at 7fb21a9fb625 ip 00005604ae394ecf sp 00007ffeccc81280 error 4 in php-fpm7.0[5604ae12c000+3af000]
[ 35.031478] usb 1-3: DVB: adapter 0 frontend 0 frequency 0 out of range (174000000..862000000)
[ 36.442022] php-fpm7.0[2367]: segfault at 7fb21a9bc805 ip 00005604ae394ecf sp 00007ffeccc81280 error 4 in php-fpm7.0[5604ae12c000+3af000]
[ 60.032674] sd 0:0:0:0: [sdd] Very big device. Trying to use READ CAPACITY(16).
[ 60.153916] sd 0:0:0:1: [sde] Very big device. Trying to use READ CAPACITY(16).
[ 60.446154] sd 0:0:0:2: [sdf] Very big device. Trying to use READ CAPACITY(16).
[ 60.633059] sd 0:0:0:3: [sdg] Very big device. Trying to use READ CAPACITY(16).
[ 60.786270] sd 0:0:0:4: [sdh] Very big device. Trying to use READ CAPACITY(16).
menion@Menionubuntu:~$
