On Wed, 15 Apr 2009, Sascha Hauer wrote: > Hi Guennadi, > > On Wed, Apr 15, 2009 at 02:29:05PM +0200, Guennadi Liakhovetski wrote: > > From: Guennadi Liakhovetski <lg@xxxxxxx> > > > > Add support for the i.MX31 OTG controller in pure device mode to the pcm037 > > board. > > Have you already investigated what is missing for OTG support? I'm > asking because currently I use the same port as host port, so that would > be the next logical step. No, I haven't. How far are you with the host support? I looked briefly at some recent OTG patches on the list, the whole infrastructure seems to be still very much experimental and unstable. That was a couple of months ago though. Could you also test your driver with the first port, and implement it first as host-only? Adding OTG later when both host and device are in place? > > +/* OTG config */ > > +static struct fsl_usb2_platform_data usb_data = { > > + .operating_mode = FSL_USB2_DR_DEVICE, > > + .phy_mode = FSL_USB2_PHY_ULPI, > > +}; > > + > > +static struct resource otg_resources[] = { > > + { > > + .start = OTG_BASE_ADDR, > > + .end = OTG_BASE_ADDR + 0x1ff, > > + .flags = IORESOURCE_MEM, > > + }, { > > + .start = MXC_INT_USB3, > > + .flags = IORESOURCE_IRQ, > > + }, > > +}; > > + > > +static u64 udc_dmamask = DMA_BIT_MASK(32); > > + > > +/* OTG gadget device */ > > +static struct platform_device otg_udc_device = { > > + .name = "fsl-usb2-udc", > > + .id = -1, > > + .dev = { > > + .dma_mask = &udc_dmamask, > > + .coherent_dma_mask = 0xffffffff, > > + .platform_data = &usb_data, > > + }, > > + .resource = otg_resources, > > + .num_resources = ARRAY_SIZE(otg_resources), > > +}; > > > why not devices.[ch]? Sure, can do that too, if you prefer. As UDC support is ready and the patch is very small, it just extends an existing driver, I would propose to get it in the mainline now, and extend for OTG when the host part is ready too. Would the UDC driver have to be modified for that too? Probably, yes. That would be another argument for pulling this patch first. If you agree, I'll resubmit only this patch, moving platform data into devices.[hc]. Thanks Guennadi --- Guennadi Liakhovetski, Ph.D. Freelance Open-Source Software Developer -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html