As Documentation/kbuild/kconfig-language.txt notes, 'select' should be
used with care - it forces a lower limit of another symbol, ignoring
the dependency.
MFD_SYSCON depends on HAS_IOMEM, but several drivers with COMPILE_TEST
select it.
This causes unmet dependencies for architecture without HAS_IOMEM.
$ make ARCH=score randconfig
scripts/kconfig/conf --randconfig Kconfig
KCONFIG_SEED=0x27C47F43
warning: (HWSPINLOCK_QCOM && AHCI_MTK && STMMAC_PLATFORM && ...)
selects MFD_SYSCON which has unmet direct dependencies (HAS_IOMEM)
Use 'depends on' to observe the dependency.
This commit was created by the following command:
$ find drivers -name 'Kconfig*' | xargs sed -i -e \
's/select MFD_SYSCON$/depends on MFD_SYSCON/'
Then, COMMON_CLK_NXP and S3C2410_WATCHDOG were fixed up manually.
Also, make MFD_SYSCON 'default y' because some defconfig files may
rely on someone select's MFD_SYSCON.
Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
---
If you have a better idea to fix 'unmet dependencies',
please suggest.
drivers/ata/Kconfig | 2 +-
drivers/clk/Kconfig | 9 ++++-----
drivers/clk/imgtec/Kconfig | 2 +-
drivers/clocksource/Kconfig | 4 ++--
drivers/dma/Kconfig | 2 +-
drivers/gpu/drm/exynos/Kconfig | 2 +-
drivers/hwspinlock/Kconfig | 2 +-
drivers/input/touchscreen/Kconfig | 2 +-
drivers/irqchip/Kconfig | 2 +-
drivers/media/platform/Kconfig | 2 +-
drivers/media/platform/exynos4-is/Kconfig | 2 +-
drivers/memory/Kconfig | 2 +-
drivers/mfd/Kconfig | 5 +++--
drivers/net/ethernet/hisilicon/Kconfig | 2 +-
drivers/net/ethernet/stmicro/stmmac/Kconfig | 16 ++++++++--------
drivers/net/ethernet/ti/Kconfig | 2 +-
drivers/pci/dwc/Kconfig | 2 +-
drivers/pci/host/Kconfig | 2 +-
drivers/phy/hisilicon/Kconfig | 4 ++--
drivers/phy/ralink/Kconfig | 2 +-
drivers/phy/rockchip/Kconfig | 2 +-
drivers/phy/samsung/Kconfig | 6 +++---
drivers/phy/ti/Kconfig | 2 +-
drivers/pinctrl/Kconfig | 6 +++---
drivers/pinctrl/mvebu/Kconfig | 4 ++--
drivers/pinctrl/stm32/Kconfig | 2 +-
drivers/power/reset/Kconfig | 6 +++---
drivers/remoteproc/Kconfig | 4 ++--
drivers/reset/Kconfig | 4 ++--
drivers/rtc/Kconfig | 2 +-
drivers/soc/qcom/Kconfig | 2 +-
drivers/staging/media/omap4iss/Kconfig | 2 +-
drivers/usb/host/Kconfig | 2 +-
drivers/video/fbdev/Kconfig | 2 +-
drivers/watchdog/Kconfig | 4 ++--
35 files changed, 59 insertions(+), 59 deletions(-)
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index a7120d6..e70753c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -176,7 +176,7 @@ config AHCI_CEVA
config AHCI_MTK
tristate "MediaTek AHCI SATA support"
depends on ARCH_MEDIATEK
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
This option enables support for the MediaTek SoC's
onboard AHCI SATA controller.
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 98ce9fc..b4950d8 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -136,7 +136,7 @@ config COMMON_CLK_CS2000_CP
config COMMON_CLK_GEMINI
bool "Clock driver for Cortina Systems Gemini SoC"
depends on ARCH_GEMINI || COMPILE_TEST
- select MFD_SYSCON
+ depends on MFD_SYSCON
select RESET_CONTROLLER
---help---
This driver supports the SoC clocks on the Cortina Systems Gemini
@@ -146,7 +146,7 @@ config COMMON_CLK_ASPEED
bool "Clock driver for Aspeed BMC SoCs"
depends on ARCH_ASPEED || COMPILE_TEST
default ARCH_ASPEED
- select MFD_SYSCON
+ depends on MFD_SYSCON
select RESET_CONTROLLER
---help---
This driver supports the SoC clocks on the Aspeed BMC platforms.
@@ -193,9 +193,8 @@ config COMMON_CLK_XGENE
Sypport for the APM X-Gene SoC reference, PLL, and device clocks.
config COMMON_CLK_NXP
- def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
+ def_bool COMMON_CLK && ((ARCH_LPC18XX && MFD_SYSCON) || ARCH_LPC32XX)
select REGMAP_MMIO if ARCH_LPC32XX
- select MFD_SYSCON if ARCH_LPC18XX
---help---
Support for clock providers on NXP platforms.
@@ -224,7 +223,7 @@ config COMMON_CLK_PIC32
config COMMON_CLK_OXNAS
bool "Clock driver for the OXNAS SoC Family"
depends on ARCH_OXNAS || COMPILE_TEST
- select MFD_SYSCON
+ depends on MFD_SYSCON
---help---
Support for the OXNAS SoC Family clocks.
diff --git a/drivers/clk/imgtec/Kconfig b/drivers/clk/imgtec/Kconfig
index f6dcb74..0034a1f 100644
--- a/drivers/clk/imgtec/Kconfig
+++ b/drivers/clk/imgtec/Kconfig
@@ -1,7 +1,7 @@
config COMMON_CLK_BOSTON
bool "Clock driver for MIPS Boston boards"
depends on MIPS || COMPILE_TEST
- select MFD_SYSCON
+ depends on MFD_SYSCON
---help---
Enable this to support the system & CPU clocks on the MIPS Boston
development board from Imagination Technologies. These are simple
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index b3b4ed9..66c0987 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -61,7 +61,7 @@ config FTTMR010_TIMER
depends on HAS_IOMEM
select CLKSRC_MMIO
select TIMER_OF
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Enables support for the Faraday Technology timer block
FTTMR010.
@@ -387,7 +387,7 @@ config ATMEL_PIT
config ATMEL_ST
bool "Atmel ST timer support" if COMPILE_TEST
select TIMER_OF
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Support for the Atmel ST timer.
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 27df3e2..19d89d3 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -312,7 +312,7 @@ config LPC18XX_DMAMUX
bool "NXP LPC18xx/43xx DMA MUX for PL080"
depends on ARCH_LPC18XX || COMPILE_TEST
depends on OF && AMBA_PL08X
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Enable support for DMA on NXP LPC18xx/43xx platforms
with PL080 and multiplexed DMA request lines.
diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig
index 735ce47..85fe96a 100644
--- a/drivers/gpu/drm/exynos/Kconfig
+++ b/drivers/gpu/drm/exynos/Kconfig
@@ -20,7 +20,7 @@ comment "CRTCs"
config DRM_EXYNOS_FIMD
bool "FIMD"
depends on !FB_S3C
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Choose this option if you want to use Exynos FIMD for DRM.
diff --git a/drivers/hwspinlock/Kconfig b/drivers/hwspinlock/Kconfig
index f0f4679..3393b20 100644
--- a/drivers/hwspinlock/Kconfig
+++ b/drivers/hwspinlock/Kconfig
@@ -19,7 +19,7 @@ config HWSPINLOCK_QCOM
tristate "Qualcomm Hardware Spinlock device"
depends on HWSPINLOCK
depends on ARCH_QCOM
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Say y here to support the Qualcomm Hardware Mutex functionality, which
provides a synchronisation mechanism for the various processors on
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 4f15496..96e5e78 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -987,7 +987,7 @@ config TOUCHSCREEN_TS4800
tristate "TS-4800 touchscreen"
depends on HAS_IOMEM && OF
depends on SOC_IMX51 || COMPILE_TEST
- select MFD_SYSCON
+ depends on MFD_SYSCON
select INPUT_POLLDEV
help
Say Y here if you have a touchscreen on a TS-4800 board.
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index d913aec..92cfe72 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -201,7 +201,7 @@ config RENESAS_IRQC
config ST_IRQCHIP
bool
select REGMAP
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Enables SysCfg Controlled IRQs on STi based platforms.
diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index 614fbef..8909ee5 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -89,7 +89,7 @@ config VIDEO_OMAP3
depends on OMAP_IOMMU
select ARM_DMA_USE_IOMMU
select VIDEOBUF2_DMA_CONTIG
- select MFD_SYSCON
+ depends on MFD_SYSCON
select V4L2_FWNODE
---help---
Driver for an OMAP 3 camera controller.
diff --git a/drivers/media/platform/exynos4-is/Kconfig b/drivers/media/platform/exynos4-is/Kconfig
index 7b2c49e..cea6f2b 100644
--- a/drivers/media/platform/exynos4-is/Kconfig
+++ b/drivers/media/platform/exynos4-is/Kconfig
@@ -20,7 +20,7 @@ config VIDEO_S5P_FIMC
depends on HAS_DMA
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
- select MFD_SYSCON
+ depends on MFD_SYSCON
select VIDEO_EXYNOS4_IS_COMMON
help
This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC camera host
diff --git a/drivers/memory/Kconfig b/drivers/memory/Kconfig
index 19a0e83..924d471 100644
--- a/drivers/memory/Kconfig
+++ b/drivers/memory/Kconfig
@@ -29,7 +29,7 @@ config ATMEL_EBI
bool "Atmel EBI driver"
default y
depends on ARCH_AT91 && OF
- select MFD_SYSCON
+ depends on MFD_SYSCON
select MFD_ATMEL_SMC
help
Driver for Atmel EBI controller.
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index b860eb5..fbbe20a 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -123,7 +123,7 @@ config MFD_ATMEL_HLCDC
config MFD_ATMEL_SMC
bool
- select MFD_SYSCON
+ depends on MFD_SYSCON
config MFD_BCM590XX
tristate "Broadcom BCM590xx PMUs"
@@ -1206,6 +1206,7 @@ config MFD_SUN6I_PRCM
config MFD_SYSCON
bool "System Controller Register R/W Based on Regmap"
select REGMAP_MMIO
+ default y
help
Select this option to enable accessing system control registers
via regmap.
@@ -1843,7 +1844,7 @@ config MFD_VEXPRESS_SYSREG
select CLKSRC_MMIO
select GPIO_GENERIC_PLATFORM
select MFD_CORE
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
System Registers are the platform configuration block
on the ARM Ltd. Versatile Express board.
diff --git a/drivers/net/ethernet/hisilicon/Kconfig b/drivers/net/ethernet/hisilicon/Kconfig
index 8bcf470..ca9d3e8 100644
--- a/drivers/net/ethernet/hisilicon/Kconfig
+++ b/drivers/net/ethernet/hisilicon/Kconfig
@@ -39,7 +39,7 @@ config HIP04_ETH
tristate "HISILICON P04 Ethernet support"
depends on HAS_IOMEM # For MFD_SYSCON
select MARVELL_PHY
- select MFD_SYSCON
+ depends on MFD_SYSCON
select HNS_MDIO
---help---
If you wish to compile a kernel for a hardware with hisilicon p04 SoC and
diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index e28c0d2..518c3f3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -15,7 +15,7 @@ if STMMAC_ETH
config STMMAC_PLATFORM
tristate "STMMAC Platform bus support"
depends on STMMAC_ETH
- select MFD_SYSCON
+ depends on MFD_SYSCON
default y
---help---
This selects the platform specific bus support for the stmmac driver.
@@ -58,7 +58,7 @@ config DWMAC_IPQ806X
tristate "QCA IPQ806x DWMAC support"
default ARCH_QCOM
depends on OF && (ARCH_QCOM || COMPILE_TEST)
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Support for QCA IPQ806X DWMAC Ethernet.
@@ -71,7 +71,7 @@ config DWMAC_LPC18XX
tristate "NXP LPC18xx/43xx DWMAC support"
default ARCH_LPC18XX
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
- select MFD_SYSCON
+ depends on MFD_SYSCON
---help---
Support for NXP LPC18xx/43xx DWMAC Ethernet.
@@ -90,7 +90,7 @@ config DWMAC_OXNAS
tristate "Oxford Semiconductor OXNAS dwmac support"
default ARCH_OXNAS
depends on OF && COMMON_CLK && (ARCH_OXNAS || COMPILE_TEST)
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Support for Ethernet controller on Oxford Semiconductor OXNAS SoCs.
@@ -101,7 +101,7 @@ config DWMAC_ROCKCHIP
tristate "Rockchip dwmac support"
default ARCH_ROCKCHIP
depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Support for Ethernet controller on Rockchip RK3288 SoC.
@@ -112,7 +112,7 @@ config DWMAC_SOCFPGA
tristate "SOCFPGA dwmac support"
default ARCH_SOCFPGA
depends on OF && (ARCH_SOCFPGA || COMPILE_TEST)
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Support for ethernet controller on Altera SOCFPGA
@@ -124,7 +124,7 @@ config DWMAC_STI
tristate "STi GMAC support"
default ARCH_STI
depends on OF && (ARCH_STI || COMPILE_TEST)
- select MFD_SYSCON
+ depends on MFD_SYSCON
---help---
Support for ethernet controller on STi SOCs.
@@ -136,7 +136,7 @@ config DWMAC_STM32
tristate "STM32 DWMAC support"
default ARCH_STM32
depends on OF && HAS_IOMEM && (ARCH_STM32 || COMPILE_TEST)
- select MFD_SYSCON
+ depends on MFD_SYSCON
---help---
Support for ethernet controller on STM32 SOCs.
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
index 48a541e..9acad82 100644
--- a/drivers/net/ethernet/ti/Kconfig
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -65,7 +65,7 @@ config TI_CPSW
select TI_DAVINCI_MDIO
select TI_CPSW_PHY_SEL
select TI_CPSW_ALE
- select MFD_SYSCON
+ depends on MFD_SYSCON
select REGMAP
---help---
This driver supports TI's CPSW Ethernet Switch.
diff --git a/drivers/pci/dwc/Kconfig b/drivers/pci/dwc/Kconfig
index 0f666b1..1b13016 100644
--- a/drivers/pci/dwc/Kconfig
+++ b/drivers/pci/dwc/Kconfig
@@ -107,7 +107,7 @@ config PCI_LAYERSCAPE
depends on PCI
depends on OF && (ARM || ARCH_LAYERSCAPE)
depends on PCI_MSI_IRQ_DOMAIN
- select MFD_SYSCON
+ depends on MFD_SYSCON
select PCIE_DW_HOST
help
Say Y here if you want PCIe controller support on Layerscape SoCs.
diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig
index a4ed748..58c94ab 100644
--- a/drivers/pci/host/Kconfig
+++ b/drivers/pci/host/Kconfig
@@ -182,7 +182,7 @@ config PCIE_ROCKCHIP
depends on ARCH_ROCKCHIP || COMPILE_TEST
depends on OF
depends on PCI_MSI_IRQ_DOMAIN
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Say Y here if you want internal PCI support on Rockchip SoC.
There is 1 internal PCIe port available to support GEN2 with
diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig
index 6164c4c..4279c17 100644
--- a/drivers/phy/hisilicon/Kconfig
+++ b/drivers/phy/hisilicon/Kconfig
@@ -5,7 +5,7 @@ config PHY_HI6220_USB
tristate "hi6220 USB PHY support"
depends on (ARCH_HISI && ARM64) || COMPILE_TEST
select GENERIC_PHY
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Enable this to support the HISILICON HI6220 USB PHY.
@@ -15,6 +15,6 @@ config PHY_HIX5HD2_SATA
tristate "HIX5HD2 SATA PHY Driver"
depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
select GENERIC_PHY
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Support for SATA PHY on Hisilicon hix5hd2 Soc.
diff --git a/drivers/phy/ralink/Kconfig b/drivers/phy/ralink/Kconfig
index b17635b..dfb01b6 100644
--- a/drivers/phy/ralink/Kconfig
+++ b/drivers/phy/ralink/Kconfig
@@ -5,7 +5,7 @@ config PHY_RALINK_USB
tristate "Ralink USB PHY driver"
depends on RALINK || COMPILE_TEST
select GENERIC_PHY
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
This option enables support for the Ralink USB PHY found inside
RT3352, MT7620, MT7628 and MT7688.
diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index f5325b2..27c8d71 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -30,7 +30,7 @@ config PHY_ROCKCHIP_PCIE
tristate "Rockchip PCIe PHY Driver"
depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST
select GENERIC_PHY
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Enable this to support the Rockchip PCIe PHY.
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
index b7e0645..15abc3b 100644
--- a/drivers/phy/samsung/Kconfig
+++ b/drivers/phy/samsung/Kconfig
@@ -33,7 +33,7 @@ config PHY_SAMSUNG_USB2
depends on HAS_IOMEM
depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
select GENERIC_PHY
- select MFD_SYSCON
+ depends on MFD_SYSCON
default ARCH_EXYNOS
help
Enable this to support the Samsung USB 2.0 PHY driver for Samsung
@@ -72,7 +72,7 @@ config PHY_EXYNOS5_USBDRD
depends on HAS_IOMEM
depends on USB_DWC3_EXYNOS
select GENERIC_PHY
- select MFD_SYSCON
+ depends on MFD_SYSCON
default y
help
Enable USB DRD PHY support for Exynos 5 SoC series.
@@ -87,7 +87,7 @@ config PHY_EXYNOS5250_SATA
select GENERIC_PHY
select I2C
select I2C_S3C2410
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Enable this to support SATA SerDes/Phy found on Samsung's
Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig
index 2050356..bfa50d1 100644
--- a/drivers/phy/ti/Kconfig
+++ b/drivers/phy/ti/Kconfig
@@ -5,7 +5,7 @@ config PHY_DA8XX_USB
tristate "TI DA8xx USB PHY Driver"
depends on ARCH_DAVINCI_DA8XX
select GENERIC_PHY
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Enable this to support the USB PHY on DA8xx SoCs.
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 0f254b3..6bfb4f1 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -168,7 +168,7 @@ config PINCTRL_GEMINI
default ARCH_GEMINI
select PINMUX
select GENERIC_PINCONF
- select MFD_SYSCON
+ depends on MFD_SYSCON
config PINCTRL_MCP23S08
tristate "Microchip MCP23xxx I/O expander"
@@ -194,14 +194,14 @@ config PINCTRL_OXNAS
select GPIOLIB
select OF_GPIO
select GPIOLIB_IRQCHIP
- select MFD_SYSCON
+ depends on MFD_SYSCON
config PINCTRL_ROCKCHIP
bool
select PINMUX
select GENERIC_PINCONF
select GENERIC_IRQ_CHIP
- select MFD_SYSCON
+ depends on MFD_SYSCON
config PINCTRL_RZA1
bool "Renesas RZ/A1 gpio and pinctrl driver"
diff --git a/drivers/pinctrl/mvebu/Kconfig b/drivers/pinctrl/mvebu/Kconfig
index d9773b7..6ba5f49 100644
--- a/drivers/pinctrl/mvebu/Kconfig
+++ b/drivers/pinctrl/mvebu/Kconfig
@@ -6,7 +6,7 @@ config PINCTRL_MVEBU
config PINCTRL_DOVE
bool
select PINCTRL_MVEBU
- select MFD_SYSCON
+ depends on MFD_SYSCON
config PINCTRL_KIRKWOOD
bool
@@ -47,6 +47,6 @@ config PINCTRL_ORION
config PINCTRL_ARMADA_37XX
bool
select GENERIC_PINCONF
- select MFD_SYSCON
+ depends on MFD_SYSCON
select PINCONF
select PINMUX
diff --git a/drivers/pinctrl/stm32/Kconfig b/drivers/pinctrl/stm32/Kconfig
index 1c4e00b2..6896f7e 100644
--- a/drivers/pinctrl/stm32/Kconfig
+++ b/drivers/pinctrl/stm32/Kconfig
@@ -7,7 +7,7 @@ config PINCTRL_STM32
select GENERIC_PINCONF
select GPIOLIB
select IRQ_DOMAIN_HIERARCHY
- select MFD_SYSCON
+ depends on MFD_SYSCON
config PINCTRL_STM32F429
bool "STMicroelectronics STM32F429 pin control" if COMPILE_TEST && !MACH_STM32F429
diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig
index a102e74..8f3b7a6 100644
--- a/drivers/power/reset/Kconfig
+++ b/drivers/power/reset/Kconfig
@@ -170,7 +170,7 @@ config POWER_RESET_KEYSTONE
bool "Keystone reset driver"
depends on ARCH_KEYSTONE || COMPILE_TEST
depends on HAS_IOMEM
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Reboot support for the KEYSTONE SoCs.
@@ -178,7 +178,7 @@ config POWER_RESET_SYSCON
bool "Generic SYSCON regmap reset driver"
depends on OF
depends on HAS_IOMEM
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Reboot support for generic SYSCON mapped register reset.
@@ -186,7 +186,7 @@ config POWER_RESET_SYSCON_POWEROFF
bool "Generic SYSCON regmap poweroff driver"
depends on OF
depends on HAS_IOMEM
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Poweroff support for generic SYSCON mapped register poweroff.
diff --git a/drivers/remoteproc/Kconfig b/drivers/remoteproc/Kconfig
index b609e1d..4ef945f 100644
--- a/drivers/remoteproc/Kconfig
+++ b/drivers/remoteproc/Kconfig
@@ -90,7 +90,7 @@ config QCOM_ADSP_PIL
depends on QCOM_SMEM
depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
- select MFD_SYSCON
+ depends on MFD_SYSCON
select QCOM_MDT_LOADER
select QCOM_RPROC_COMMON
select QCOM_SCM
@@ -107,7 +107,7 @@ config QCOM_Q6V5_PIL
depends on QCOM_SMEM
depends on RPMSG_QCOM_SMD || (COMPILE_TEST && RPMSG_QCOM_SMD=n)
depends on RPMSG_QCOM_GLINK_SMEM || RPMSG_QCOM_GLINK_SMEM=n
- select MFD_SYSCON
+ depends on MFD_SYSCON
select QCOM_RPROC_COMMON
select QCOM_SCM
help
diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig
index 7fc7769..e2536dc 100644
--- a/drivers/reset/Kconfig
+++ b/drivers/reset/Kconfig
@@ -50,7 +50,7 @@ config RESET_HSDK
config RESET_IMX7
bool "i.MX7 Reset Driver" if COMPILE_TEST
default SOC_IMX7D
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
This enables the reset controller driver for i.MX7 SoCs.
@@ -110,7 +110,7 @@ config RESET_TI_SCI
config RESET_TI_SYSCON
tristate "TI SYSCON Reset Driver"
depends on HAS_IOMEM
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
This enables the reset driver support for TI devices with
memory-mapped reset registers as part of a syscon device node. If
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 8ab5f0a5..7cc8a6f 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -1413,7 +1413,7 @@ config RTC_DRV_AT91RM9200
config RTC_DRV_AT91SAM9
tristate "AT91SAM9 RTT as RTC"
depends on ARCH_AT91 || COMPILE_TEST
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
can be used as an RTC thanks to the backup power supply (e.g. a
diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
index e050eb8..c51f50c 100644
--- a/drivers/soc/qcom/Kconfig
+++ b/drivers/soc/qcom/Kconfig
@@ -15,7 +15,7 @@ config QCOM_GLINK_SSR
config QCOM_GSBI
tristate "QCOM General Serial Bus Interface"
depends on ARCH_QCOM
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Say y here to enable GSBI support. The GSBI provides control
functions for connecting the underlying serial UART, SPI, and I2C
diff --git a/drivers/staging/media/omap4iss/Kconfig b/drivers/staging/media/omap4iss/Kconfig
index 4618346..616169e 100644
--- a/drivers/staging/media/omap4iss/Kconfig
+++ b/drivers/staging/media/omap4iss/Kconfig
@@ -2,7 +2,7 @@ config VIDEO_OMAP4
tristate "OMAP 4 Camera support"
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && I2C && ARCH_OMAP4
depends on HAS_DMA
- select MFD_SYSCON
+ depends on MFD_SYSCON
select VIDEOBUF2_DMA_CONTIG
---help---
Driver for an OMAP 4 ISS controller.
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 4fcfb30..b26b124 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -54,7 +54,7 @@ config USB_XHCI_PLATFORM
config USB_XHCI_MTK
tristate "xHCI support for MediaTek SoCs"
- select MFD_SYSCON
+ depends on MFD_SYSCON
depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST
---help---
Say 'Y' to enable the support for the xHCI host controller
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
index 11e699f..88ebc5b 100644
--- a/drivers/video/fbdev/Kconfig
+++ b/drivers/video/fbdev/Kconfig
@@ -316,7 +316,7 @@ config PLAT_VERSATILE_CLCD
depends on ARM
depends on FB_ARMCLCD && FB=y
select REGMAP
- select MFD_SYSCON
+ depends on MFD_SYSCON
config FB_ACORN
bool "Acorn VIDC support"
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index aff773b..f0c212f 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -374,8 +374,8 @@ config HAVE_S3C2410_WATCHDOG
config S3C2410_WATCHDOG
tristate "S3C2410 Watchdog"
depends on HAVE_S3C2410_WATCHDOG || COMPILE_TEST
+ depends on MFD_SYSCON
select WATCHDOG_CORE
- select MFD_SYSCON if ARCH_EXYNOS
help
Watchdog timer block in the Samsung SoCs. This will reboot
the system when the timer expires with the watchdog enabled.
@@ -545,7 +545,7 @@ config TS4800_WATCHDOG
depends on HAS_IOMEM && OF
depends on SOC_IMX51 || COMPILE_TEST
select WATCHDOG_CORE
- select MFD_SYSCON
+ depends on MFD_SYSCON
help
Technologic Systems TS-4800 has watchdog timer implemented in
an external FPGA. Say Y here if you want to support for the
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
