Hi,
Amelie Delaunay <amelie.delaunay@xxxxxx> writes:
> On some boards, especially when vbus supply requires large current,
> and the charge pump on the PHY isn't enough, an external vbus power switch
> may be used.
> Add support for this optional external vbus supply in ehci-platform.
>
> Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxx>
>
> ---
> Changes in v2:
> * Address Roger Quadros comments: move regulator_enable/disable from
> ehci_platform_power_on/off to ehci_platform_port_power.
> ---
> Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 +
> drivers/usb/host/ehci-platform.c | 31 ++++++++++++++++++++++
> 2 files changed, 32 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
> index 3efde12..fc480cd 100644
> --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
> @@ -19,6 +19,7 @@ Optional properties:
> - phys : phandle + phy specifier pair
> - phy-names : "usb"
> - resets : phandle + reset specifier pair
> + - vbus-supply : phandle of regulator supplying vbus
>
> Example (Sequoia 440EPx):
> ehci@e0000300 {
> diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
> index b065a96..05be100 100644
> --- a/drivers/usb/host/ehci-platform.c
> +++ b/drivers/usb/host/ehci-platform.c
> @@ -29,6 +29,7 @@
> #include <linux/of.h>
> #include <linux/phy/phy.h>
> #include <linux/platform_device.h>
> +#include <linux/regulator/consumer.h>
> #include <linux/reset.h>
> #include <linux/usb.h>
> #include <linux/usb/hcd.h>
> @@ -46,6 +47,7 @@ struct ehci_platform_priv {
> struct reset_control *rsts;
> struct phy **phys;
> int num_phys;
> + struct regulator *vbus_supply;
> bool reset_on_resume;
> };
>
> @@ -76,6 +78,25 @@ static int ehci_platform_reset(struct usb_hcd *hcd)
> return 0;
> }
>
> +static int ehci_platform_port_power(struct usb_hcd *hcd, int portnum,
> + bool enable)
> +{
> + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd);
> + int ret = 0;
> +
> + if (priv->vbus_supply) {
you can reduce indentation here:
if (!priv->vbus_supply)
return 0;
--
balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
