On Fri, Jan 12, 2018 at 09:27:15AM +0100, Max Schulze wrote: > Add Motorola Device ID and blacklist entry to the driver usb/serial/option > > Signed-off-by: Max Schulze <max.schulze@xxxxxxxxx> > --- > v2: reformatted Patch, first version was declined by GK-H's Bot > > Thanks for the help, Johan! > > To an URB setup request from the host > bmRequestType: 0x21 > bRequest: 34 > wValue: 0x0003 > wIndex: 0 (0x0000) > wLength: 0 > > the device responds with > URB status: Broken pipe (-EPIPE) (-32) > > So blacklisting to avoid the usb_wwan_send_setup in usb_wwan_dtr_rts of usb_wwan. > Tested now to work with miniterm.py and minicom without errors. > > D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 > P: Vendor=0cad ProdID=9011 Rev=24.16 > S: Manufacturer=Motorola Solutions Inc. > S: Product=Motorola Solutions TETRA PEI interface > C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA > I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) > I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) Why not put all of this information above the --- line? thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
