On Wed, Jan 10, 2018 at 01:42:32PM +0800, Ji-Ze Hong (Peter Hong) wrote: > Hi Johan, > > Johan Hovold 於 2018/1/9 下午 07:32 寫道: > > On Thu, Jan 04, 2018 at 10:29:21AM +0800, Ji-Ze Hong (Peter Hong) wrote: > >> + /* > >> + * We'll make tx frame error when baud rate from 384~500kps. So we'll > >> + * delay all tx data frame with 1bit. > >> + */ > >> + port_priv->shadow_clk |= F81534_CLK_TX_DELAY_1BIT; > > > > You don't wan't to enable this only for the affected rates? > > > > This bit will control all transmit TX frame always delay 1 bit > on enabled, but It'll transmit TX frame randomly delay 1 bit on > disabled. > > We had tested it with BurnInTest to check the performance, > It'll not make the performance regression. So we'll directly add > it on all baud rate. Ok, thanks for confirming. Johan -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
