Hi Johan,
Johan Hovold 於 2018/1/9 下午 07:32 寫道:
On Thu, Jan 04, 2018 at 10:29:21AM +0800, Ji-Ze Hong (Peter Hong) wrote:
+ /*
+ * We'll make tx frame error when baud rate from 384~500kps. So we'll
+ * delay all tx data frame with 1bit.
+ */
+ port_priv->shadow_clk |= F81534_CLK_TX_DELAY_1BIT;
You don't wan't to enable this only for the affected rates?
This bit will control all transmit TX frame always delay 1 bit
on enabled, but It'll transmit TX frame randomly delay 1 bit on
disabled.
We had tested it with BurnInTest to check the performance,
It'll not make the performance regression. So we'll directly add
it on all baud rate.
Thanks
--
With Best Regards,
Peter Hong
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
