Re: [PATCH 1/2] Revert "Bluetooth: btusb: fix QCA Rome suspend/resume"

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Dec 20, 2017 at 07:00:07PM +0800, Kai-Heng Feng wrote:
> This reverts commit fd865802c66bc451dc515ed89360f84376ce1a56.
> 
> This commit causes a regression on some QCA ROME chips. The USB device
> reset happens in btusb_open(), hence firmware loading gets interrupted.

Oh, did you really confirm that's the root of the problem? I was only
hypothesizing, with some informed observation and code review; but I
didn't fully convince myself. If so, that's interesting.

> Furthermore, this commit stops working after commit
> ("a0085f2510e8976614ad8f766b209448b385492f Bluetooth: btusb: driver to
> enable the usb-wakeup feature"). Reset-resume quirk only gets enabled in
> btusb_suspend() when it's not a wakeup source.
> 
> If we really want to reset the USB device, we need to do it before
> btusb_open(). Let's handle it in drivers/usb/core/quirks.c.
> 
> Cc: stable@xxxxxxxxxxxxxxx
> Cc: Leif Liddy <leif.linux@xxxxxxxxx>
> Cc: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
> Cc: Brian Norris <briannorris@xxxxxxxxxxxx>
> Cc: Daniel Drake <drake@xxxxxxxxxxxx>
> Signed-off-by: Kai-Heng Feng <kai.heng.feng@xxxxxxxxxxxxx>

Looks good to me. Definitely a regression and we need to clear that up
in mainline and stable before reintroducing the intended fix:

Reviewed-by: Brian Norris <briannorris@xxxxxxxxxxxx>
Tested-by: Brian Norris <briannorris@xxxxxxxxxxxx>

Thanks!

> ---
> 
> Daniel, Cc you because this also affects your original quirk patch for
> Realtek btusb.
> 
>  drivers/bluetooth/btusb.c | 6 ------
>  1 file changed, 6 deletions(-)
> 
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index f7120c9eb9bd..da353c4acdc7 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -3117,12 +3117,6 @@ static int btusb_probe(struct usb_interface *intf,
>  	if (id->driver_info & BTUSB_QCA_ROME) {
>  		data->setup_on_usb = btusb_setup_qca;
>  		hdev->set_bdaddr = btusb_set_bdaddr_ath3012;
> -
> -		/* QCA Rome devices lose their updated firmware over suspend,
> -		 * but the USB hub doesn't notice any status change.
> -		 * Explicitly request a device reset on resume.
> -		 */
> -		set_bit(BTUSB_RESET_RESUME, &data->flags);
>  	}
>  
>  #ifdef CONFIG_BT_HCIBTUSB_RTL
> -- 
> 2.14.1
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux