Currently, the vbus_pin assignment loop is limited by the value of the "ports" variable in the platform data. Now that the vbus_pin array is no longer flexible, we can use its actual size. Signed-off-by: Justin Waters <justin.waters@xxxxxxxxxxx> --- drivers/usb/host/ohci-at91.c | 4 ++-- 1 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 4ed228a..bb5e6f6 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -280,7 +280,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) * are always powered while this driver is active, and use * active-low power switches. */ - for (i = 0; i < pdata->ports; i++) { + for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { if (pdata->vbus_pin[i] <= 0) continue; gpio_request(pdata->vbus_pin[i], "ohci_vbus"); @@ -298,7 +298,7 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) int i; if (pdata) { - for (i = 0; i < pdata->ports; i++) { + for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { if (pdata->vbus_pin[i] <= 0) continue; gpio_direction_output(pdata->vbus_pin[i], 1); -- 1.5.4.3 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html