Re: dwc2: usb: Unable to clear channel error

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 10/18/2017 6:07 PM, Marek Vasut wrote:
> On 10/18/2017 04:05 PM, Dinh Nguyen wrote:
>> Hi,
>>
>> I'm trying to bringup the DWC2 USB IP version 330A on a new Stratix10
>> SoC and have encountered this error in both Linux and U-Boot:
>>
>> U-Boot(version v2017.09)
>>
>> # usb start
>> starting USB...
>> USB0:   Core Release: 3.30a
>> dwc_otg_core_host_init: Timeout!
>> dwc_otg_core_host_init: Timeout!
>>
>> Linux(kernel v4.13)
>>
>> [    1.299891] dwc2 ffb00000.usb: DWC OTG Controller
>> [    1.304628] dwc2 ffb00000.usb: new USB bus registered, assigned bus
>> number 1
>> [    1.311698] dwc2 ffb00000.usb: irq 13, io mem 0xffb00000
>> [    1.318309] dwc2 ffb00000.usb: Unable to clear enable on channel 0
>> [    1.325749] dwc2 ffb00000.usb: Unable to clear enable on channel 1
>> [    1.333187] dwc2 ffb00000.usb: Unable to clear enable on channel 2
>> [    1.340626] dwc2 ffb00000.usb: Unable to clear enable on channel 3
>> [    1.348064] dwc2 ffb00000.usb: Unable to clear enable on channel 4
>> [    1.355503] dwc2 ffb00000.usb: Unable to clear enable on channel 5
>> [    1.362941] dwc2 ffb00000.usb: Unable to clear enable on channel 6
>> [    1.370379] dwc2 ffb00000.usb: Unable to clear enable on channel 7
>> [    1.377818] dwc2 ffb00000.usb: Unable to clear enable on channel 8
>> [    1.385256] dwc2 ffb00000.usb: Unable to clear enable on channel 9
>> [    1.392694] dwc2 ffb00000.usb: Unable to clear enable on channel 10
>> [    1.400218] dwc2 ffb00000.usb: Unable to clear enable on channel 11
>> [    1.407743] dwc2 ffb00000.usb: Unable to clear enable on channel 12
>> [    1.415269] dwc2 ffb00000.usb: Unable to clear enable on channel 13
>> [    1.422794] dwc2 ffb00000.usb: Unable to clear enable on channel 14
>>
>> Just wondering if anyone might have an idea on what could be causing
>> this error?
> 
> Maybe some clock are not enabled ?
> 

Hi ,

Are you following board/hisilicon/hikey/README file instructions when 
using U-Boot? Specially paragraph FLASHING point 4, where discussed 
"dwc_otg_core_host_init: Timeout!" message.

Regards,
Grigor Tovmasyan
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux