Re: [PATCH 2/2] phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

Andrzej Pietrasiewicz <andrzej.p@xxxxxxxxxxx> writes:
>>>>> +static int exynos5_usbdrd_phy_reset(struct phy *phy)
>>>>> +{
>>>>> +	struct phy_usb_instance *inst = phy_get_drvdata(phy);
>>>>> +	struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
>>>>> +
>>>>> +	return exynos5420_usbdrd_phy_calibrate(phy_drd);
>>>>> +}
>>>>> +
>>>>>    static const struct phy_ops exynos5_usbdrd_phy_ops = {
>>>>>    	.init		= exynos5_usbdrd_phy_init,
>>>>>    	.exit		= exynos5_usbdrd_phy_exit,
>>>>>    	.power_on	= exynos5_usbdrd_phy_power_on,
>>>>>    	.power_off	= exynos5_usbdrd_phy_power_off,
>>>>> +	.reset		= exynos5_usbdrd_phy_reset,
>>>>>    	.owner		= THIS_MODULE,
>>>>>    };
>>>>>    
>>>>> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
>>>>> index 03474d3..1d5836e 100644
>>>>> --- a/drivers/usb/dwc3/core.c
>>>>> +++ b/drivers/usb/dwc3/core.c
>>>>> @@ -156,9 +156,10 @@ static void __dwc3_set_mode(struct work_struct *work)
>>>>>    		} else {
>>>>>    			if (dwc->usb2_phy)
>>>>>    				otg_set_vbus(dwc->usb2_phy->otg, true);
>>>>> -			if (dwc->usb2_generic_phy)
>>>>> +			if (dwc->usb2_generic_phy) {
>>>>>    				phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
>>>>> -
>>>>> +				phy_reset(dwc->usb2_generic_phy);
>>>>
>>>> it doesn't look like this is the best place to reset the phy. Also,
>>>
>>> right, phy_reset is done during initialization before phy_power_on/phy_init or
>>> in error cases.
>>>
>>>> ->reset() doesn't seem to match correctly with a calibration. That seems
>>>> to be more fitting to a ->power_on() or ->init() implementation.
>>>
>>> yeah, the initial patch seems to calibrate in phy_init(). Not sure why it's
>>> modified.
>> 
>> The original patch used a hack like below, in xhci_plat_probe():
>> 
>> +       /* Initialize and power-on USB 3.0 PHY */
>> +       xhci->shared_hcd->phy->init_count = 0;
>> +       ret = phy_init(xhci->shared_hcd->phy);
>> +       if (ret)
>> +               goto dealloc_usb3_hcd;
>> +
>> +       xhci->shared_hcd->phy->power_count = 0;
>> +       ret = phy_power_on(xhci->shared_hcd->phy);
>> +       if (ret) {
>> +               phy_exit(xhci->shared_hcd->phy);
>> +               goto dealloc_usb3_hcd;
>> +       }
>> +
>> 
>> Manually setting init_count to 0 in order for the subsequent phy_init() to
>> happen probably does not look good.
>> 
>> The calibration is clearly needed. However, I don't have any strong opinions
>> on from which place exactly to trigger the calibration process.
>> The original patch did not make it upstream, but if that patch is ok,
>> it is perfectly fine with me to drop my version and take that one instead.
>
> Me bad, I did not write about an important issue.
> The calibration must happen after usb_add_hcd(), otherwise
> usb_add_hcd() indirectly triggers overwriting the effects of calibration.

in that case, you should do that from xhci-plat indeed. I think the
whole idea with init_count is just to make sure you don't initialize it
twice.

One thing's for sure, ->reset() doesn't seem to be the matching callback
for you to use and, given your explanation above, dwc3 doesn't seem to
be the right place to fiddle with that.

Seems like we need an extension of the generic PHY framework to cope
with your requirement.

-- 
balbi

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux