Re: [PATCH v2 3/3] power: wm831x_power: Support USB charger current limit management

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 3 July 2017 at 23:50, Sebastian Reichel
<sebastian.reichel@xxxxxxxxxxxxxxx> wrote:
> Hi,
>
> On Mon, Jul 03, 2017 at 02:07:15PM +0800, Baolin Wang wrote:
>> Integrate with the newly added USB charger interface to limit the current
>> we draw from the USB input based on the input device configuration
>> identified by the USB stack, allowing us to charge more quickly from high
>> current inputs without drawing more current than specified from others.
>>
>> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
>> Signed-off-by: Baolin Wang <baolin.wang@xxxxxxxxxx>
>
> Missing DT binding documentation, otherwise fine with me.
> Would be nice to convert existing drivers:
>
> $ git grep -l extcon -- drivers/power/supply
> drivers/power/supply/axp288_charger.c
> drivers/power/supply/bq24190_charger.c
> drivers/power/supply/charger-manager.c
> drivers/power/supply/qcom_smbb.c

I'll create new patches with adding the DT binding documentation if
there are no objections for USB phy modification, moreover I will help
to convert these drivers you listed. Thanks.

>
> -- Sebastian
>
>> ---
>>  drivers/power/supply/wm831x_power.c |   61 +++++++++++++++++++++++++++++++++++
>>  1 file changed, 61 insertions(+)
>>
>> diff --git a/drivers/power/supply/wm831x_power.c b/drivers/power/supply/wm831x_power.c
>> index 7082301..3e3480708 100644
>> --- a/drivers/power/supply/wm831x_power.c
>> +++ b/drivers/power/supply/wm831x_power.c
>> @@ -13,6 +13,7 @@
>>  #include <linux/platform_device.h>
>>  #include <linux/power_supply.h>
>>  #include <linux/slab.h>
>> +#include <linux/usb/phy.h>
>>
>>  #include <linux/mfd/wm831x/core.h>
>>  #include <linux/mfd/wm831x/auxadc.h>
>> @@ -31,6 +32,8 @@ struct wm831x_power {
>>       char usb_name[20];
>>       char battery_name[20];
>>       bool have_battery;
>> +     struct usb_phy *usb_phy;
>> +     struct notifier_block usb_notify;
>>  };
>>
>>  static int wm831x_power_check_online(struct wm831x *wm831x, int supply,
>> @@ -125,6 +128,43 @@ static int wm831x_usb_get_prop(struct power_supply *psy,
>>       POWER_SUPPLY_PROP_VOLTAGE_NOW,
>>  };
>>
>> +/* In milliamps */
>> +static const unsigned int wm831x_usb_limits[] = {
>> +     0,
>> +     2,
>> +     100,
>> +     500,
>> +     900,
>> +     1500,
>> +     1800,
>> +     550,
>> +};
>> +
>> +static int wm831x_usb_limit_change(struct notifier_block *nb,
>> +                                unsigned long limit, void *data)
>> +{
>> +     struct wm831x_power *wm831x_power = container_of(nb,
>> +                                                      struct wm831x_power,
>> +                                                      usb_notify);
>> +     unsigned int i, best;
>> +
>> +     /* Find the highest supported limit */
>> +     best = 0;
>> +     for (i = 0; i < ARRAY_SIZE(wm831x_usb_limits); i++) {
>> +             if (limit >= wm831x_usb_limits[i] &&
>> +                 wm831x_usb_limits[best] < wm831x_usb_limits[i])
>> +                     best = i;
>> +     }
>> +
>> +     dev_dbg(wm831x_power->wm831x->dev,
>> +             "Limiting USB current to %umA", wm831x_usb_limits[best]);
>> +
>> +     wm831x_set_bits(wm831x_power->wm831x, WM831X_POWER_STATE,
>> +                     WM831X_USB_ILIM_MASK, best);
>> +
>> +     return 0;
>> +}
>> +
>>  /*********************************************************************
>>   *           Battery properties
>>   *********************************************************************/
>> @@ -607,6 +647,22 @@ static int wm831x_power_probe(struct platform_device *pdev)
>>               }
>>       }
>>
>> +     power->usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev,
>> +                                                  "usb-phy", 0);
>> +     if (IS_ERR(power->usb_phy)) {
>> +             ret = PTR_ERR(power->usb_phy);
>> +             dev_err(&pdev->dev, "Failed to find USB phy: %d\n", ret);
>> +             goto err_bat_irq;
>> +     }
>> +
>> +     power->usb_notify.notifier_call = wm831x_usb_limit_change;
>> +     ret = usb_register_notifier(power->usb_phy,
>> +                                 &power->usb_notify);
>> +     if (ret) {
>> +             dev_err(&pdev->dev, "Failed to register notifier: %d\n", ret);
>> +             goto err_bat_irq;
>> +     }
>> +
>>       return ret;
>>
>>  err_bat_irq:
>> @@ -637,6 +693,11 @@ static int wm831x_power_remove(struct platform_device *pdev)
>>       struct wm831x *wm831x = wm831x_power->wm831x;
>>       int irq, i;
>>
>> +     if (wm831x_power->usb_phy) {
>> +             usb_unregister_notifier(wm831x_power->usb_phy,
>> +                                     &wm831x_power->usb_notify);
>> +     }
>> +
>>       for (i = 0; i < ARRAY_SIZE(wm831x_bat_irqs); i++) {
>>               irq = wm831x_irq(wm831x,
>>                                platform_get_irq_byname(pdev,
>> --
>> 1.7.9.5
>>



-- 
Baolin.wang
Best Regards
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux