Re: kernel does not receive any USB3.0 plug/unplug events from the Renesas upd720202 chipset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello.
I have one problem with chip Renesas uPD720202 (card Startech PCIUSB3S22).
In Windows XP run fine, very fine, but in GNU/Linux kernel does not
receive any USB3.0 plug/unplug events, why?
No usb device is recognized, it is as if the card had nothing connected.

I have tried the following kernels:

Linux version 4.12.0-041200rc1-generic (kernel@gomeisa) (gcc version
6.3.0 20170510 (Ubuntu 6.3.0-17ubuntu1) ) #201705131731 SMP Sat May 13
21:48:41 UTC 2017
Linux version 4.11.1-041101-generic (kernel@tangerine) (gcc version
6.3.0 20170510 (Ubuntu 6.3.0-17ubuntu1) ) #201705140931 SMP Sun May 14
13:50:33 UTC 2017

In no case kernel does not receive any USB plug/unplug events

The card firmware is the latest (2026) and is well installed.
My machine is very old: P3 1Ghz on ASUS P3B-F but run fine
Xavier.
Thanks

********************************************************************************************************


dmesg.4.12-rc1
dmesg.4.12-rc1.with_pendrive_connected_at_boot
lspci.4.12-rc1
dmesg.4.11.1

********************************************************************************************************






dmesg.4.12-rc1


[    0.000000] Linux version 4.12.0-041200rc1-generic (kernel@gomeisa)
(gcc version 6.3.0 20170510 (Ubuntu 6.3.0-17ubuntu1) ) #201705131731
SMP Sat May 13 21:48:41 UTC 2017
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffebfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffec000-0x000000003ffeefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003ffef000-0x000000003fffefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: System Manufacturer System Name/<P3B-F>, BIOS ASUS
P3B-F ACPI BIOS Revision 1008 Beta 004 10/15/2001
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3ffec max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-AFFFF uncachable
[    0.000000]   B0000-BFFFF write-combining
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 0C8000000 mask FF8000000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: PAT not supported by CPU.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x1e3fffff]
[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[    0.000000] BRK [0x1df06000, 0x1df06fff] PGTABLE
[    0.000000] BRK [0x1df07000, 0x1df07fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33231000-0x3590ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F5A60 000014 (v00 ASUS  )
[    0.000000] ACPI: RSDT 0x000000003FFEC000 00002C (v01 ASUS   P3B_F
  30303031 MSFT 31313031)
[    0.000000] ACPI: FACP 0x000000003FFEC080 000074 (v01 ASUS   P3B_F
  30303031 MSFT 31313031)
[    0.000000] ACPI: DSDT 0x000000003FFEC100 00263A (v01 ASUS   P3B_F
  00001000 MSFT 0100000B)
[    0.000000] ACPI: FACS 0x000000003FFFF000 000040
[    0.000000] ACPI: BOOT 0x000000003FFEC040 000028 (v01 ASUS   P3B_F
  30303031 MSFT 31313031)
[    0.000000] 131MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x000000003ffebfff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003ffebfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffebfff]
[    0.000000] On node 0 totalpages: 262025
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 33774 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0xe408
[    0.000000] Local APIC disabled by BIOS -- reenabling.
[    0.000000] Found and enabled local APIC!
[    0.000000] smpboot: Boot CPU (id 0) not listed by BIOS
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xfffeffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1
nr_node_ids:1
[    0.000000] percpu: Embedded 23 pages/cpu @f71e4000 s65356 r0 d28852 u94208
[    0.000000] pcpu-alloc: s65356 r0 d28852 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 259795
[    0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-4.12.0-041200rc1-generic
root=UUID=ac8baa2d-9112-40e2-ad06-15c78dd2d616 ro quiet splash lapic
radeon.agpmode=-1 vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003ffec)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 981688K/1048100K available (8218K kernel code,
878K rwdata, 3304K rodata, 1036K init, 860K bss, 66412K reserved, 0K
cma-reserved, 135096K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff0d000 - 0xfffff000   ( 968 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xddc31000 - 0xddd34000   (1036 kB)
                     .data : 0xdd806837 - 0xddc1eb80   (4192 kB)
                     .text : 0xdd000000 - 0xdd806837   (8218 kB)
[    0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 35775 entries in 70 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:32 16
[    0.000000] CPU 0 irqstacks, hard=f6cc0000 soft=f6cc2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 1048576 bytes of page_ext
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1002.222 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated
using timer frequency.. 2004.44 BogoMIPS (lpj=4008888)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170303
[    0.012119] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.012138] ACPI: setting ELCR to 0200 (from 8c10)
[    0.012265] Security Framework initialized
[    0.012273] Yama: becoming mindful.
[    0.012338] AppArmor: AppArmor initialized
[    0.012482] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.012487] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.013366] mce: CPU supports 5 MCE banks
[    0.013408] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[    0.013412] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.029784] Freeing SMP alternatives memory: 32K
[    0.033938] smpboot: Max logical packages: 1
[    0.033950] smpboot: SMP motherboard not detected
[    0.033952] smpboot: SMP disabled
[    0.033957] Enabling APIC mode:  Flat.  Using 0 I/O APICs
[    0.036000] Performance Events: p6 PMU driver.
[    0.036000] ... version:                0
[    0.036000] ... bit width:              32
[    0.036000] ... generic registers:      2
[    0.036000] ... value mask:             00000000ffffffff
[    0.036000] ... max period:             000000007fffffff
[    0.036000] ... fixed-purpose events:   0
[    0.036000] ... event mask:             0000000000000003
[    0.036000] smp: Bringing up secondary CPUs ...
[    0.036000] smp: Brought up 1 node, 1 CPU
[    0.036000] smpboot: Total of 1 processors activated (2004.44 BogoMIPS)
[    0.036000] sched_clock: Marking stable (32000000, 0)->(25320573, 6679427)
[    0.144220] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[    0.144621] devtmpfs: initialized
[    0.145411] evm: security.selinux
[    0.145414] evm: security.SMACK64
[    0.145416] evm: security.SMACK64EXEC
[    0.145417] evm: security.SMACK64TRANSMUTE
[    0.145419] evm: security.SMACK64MMAP
[    0.145421] evm: security.ima
[    0.145422] evm: security.capability
[    0.145827] PM: Registering ACPI NVS region [mem
0x3ffff000-0x3fffffff] (4096 bytes)
[    0.146019] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.146031] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.146178] pinctrl core: initialized pinctrl subsystem
[    0.146508] RTC time: 19:16:43, date: 05/21/17
[    0.146922] NET: Registered protocol family 16
[    0.147827] EISA bus registered
[    0.147832] cpuidle: using governor ladder
[    0.147835] cpuidle: using governor menu
[    0.147841] PCCT header not found.
[    0.148194] Simple Boot Flag at 0x3a set to 0x1
[    0.148233] ACPI: bus type PCI registered
[    0.148240] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.153199] PCI: PCI BIOS revision 2.10 entry at 0xf08c0, last bus=2
[    0.153201] PCI: Using configuration type 1 for base access
[    0.158941] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.159988] ACPI: Added _OSI(Module Device)
[    0.159995] ACPI: Added _OSI(Processor Device)
[    0.159998] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.160002] ACPI: Added _OSI(Processor Aggregator Device)
[    0.164837] ACPI: Interpreter enabled
[    0.164930] ACPI: (supports S0 S1 S3 S4 S5)
[    0.164934] ACPI: Using PIC for interrupt routing
[    0.164999] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[    0.179351] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10
11 12 14 15)
[    0.179612] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10
*11 12 14 15)
[    0.179867] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11
12 14 *15)
[    0.180156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10
11 12 14 15)
[    0.180425] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.180441] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.180458] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.180470] acpi PNP0A03:00: fail to add MMCONFIG information,
can't access extended PCI configuration space under this bridge.
[    0.180673] acpi PNP0A03:00: ignoring host bridge window [mem
0x000c8000-0x000dffff window] (conflicts with Video ROM [mem
0x000c0000-0x000ccfff])
[    0.180970] PCI host bridge to bus 0000:00
[    0.180979] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.180984] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.180989] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[    0.180994] pci_bus 0000:00: root bus resource [mem
0x40000000-0xffffffff window]
[    0.181000] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.181026] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[    0.181048] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.181298] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[    0.181482] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[    0.181736] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[    0.181789] pci 0000:00:04.1: reg 0x20: [io  0xb800-0xb80f]
[    0.181816] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.181820] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.181825] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.181829] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.182013] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[    0.182066] pci 0000:00:04.2: reg 0x20: [io  0xb400-0xb41f]
[    0.182176] pci 0000:00:04.2: System wakeup disabled by ACPI
[    0.182296] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[    0.182302] * Found PM-Timer Bug on the chipset. Due to workarounds
for a bug,
               * this clock source is slow. Consider trying other clock sources
[    0.182383] pci 0000:00:04.3: quirk: [io  0xe400-0xe43f] claimed by
PIIX4 ACPI
[    0.182390] pci 0000:00:04.3: quirk: [io  0xe800-0xe80f] claimed by PIIX4 SMB
[    0.182576] pci 0000:00:09.0: [10ec:8169] type 00 class 0x020000
[    0.182597] pci 0000:00:09.0: reg 0x10: [io  0xb000-0xb0ff]
[    0.182610] pci 0000:00:09.0: reg 0x14: [mem 0xb6000000-0xb60000ff]
[    0.182654] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.182694] pci 0000:00:09.0: supports D1 D2
[    0.182699] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
[    0.182862] pci 0000:00:0a.0: [10ec:8139] type 00 class 0x020000
[    0.182883] pci 0000:00:0a.0: reg 0x10: [io  0xa800-0xa8ff]
[    0.182896] pci 0000:00:0a.0: reg 0x14: [mem 0xb5800000-0xb58000ff]
[    0.182940] pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.182978] pci 0000:00:0a.0: supports D1 D2
[    0.182983] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold
[    0.183152] pci 0000:00:0b.0: [12d8:e111] type 01 class 0x060400
[    0.183398] pci 0000:00:0e.0: [105a:4d69] type 00 class 0x018085
[    0.183419] pci 0000:00:0e.0: reg 0x10: [io  0x9800-0x9807]
[    0.183432] pci 0000:00:0e.0: reg 0x14: [io  0x9400-0x9403]
[    0.183445] pci 0000:00:0e.0: reg 0x18: [io  0x9000-0x9007]
[    0.183457] pci 0000:00:0e.0: reg 0x1c: [io  0x8800-0x8803]
[    0.183470] pci 0000:00:0e.0: reg 0x20: [io  0x8400-0x840f]
[    0.183483] pci 0000:00:0e.0: reg 0x24: [mem 0xb4800000-0xb4803fff]
[    0.183497] pci 0000:00:0e.0: reg 0x30: [mem 0x00000000-0x00003fff pref]
[    0.183535] pci 0000:00:0e.0: supports D1
[    0.183770] pci 0000:01:00.0: [1002:4e48] type 00 class 0x030000
[    0.183791] pci 0000:01:00.0: reg 0x10: [mem 0xc8000000-0xcfffffff pref]
[    0.183803] pci 0000:01:00.0: reg 0x14: [io  0xd800-0xd8ff]
[    0.183816] pci 0000:01:00.0: reg 0x18: [mem 0xb7000000-0xb700ffff]
[    0.183848] pci 0000:01:00.0: reg 0x30: [mem 0xc7fe0000-0xc7ffffff pref]
[    0.183892] pci 0000:01:00.0: supports D1 D2
[    0.184012] pci 0000:01:00.1: [1002:4e68] type 00 class 0x038000
[    0.184074] pci 0000:01:00.1: reg 0x10: [mem 0xb8000000-0xbfffffff pref]
[    0.184086] pci 0000:01:00.1: reg 0x14: [mem 0xb6800000-0xb680ffff]
[    0.184158] pci 0000:01:00.1: supports D1 D2
[    0.184294] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.184302] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.184308] pci 0000:00:01.0:   bridge window [mem 0xb6800000-0xb7dfffff]
[    0.184315] pci 0000:00:01.0:   bridge window [mem
0xb8000000-0xcfffffff pref]
[    0.184462] pci 0000:02:00.0: [1912:0015] type 00 class 0x0c0330
[    0.184508] pci 0000:02:00.0: reg 0x10: [mem 0xb5000000-0xb5001fff 64bit]
[    0.184739] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.192128] pci 0000:00:0b.0: ASPM: Could not configure common clock
[    1.192186] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.192201] pci 0000:00:0b.0:   bridge window [mem 0xb5000000-0xb57fffff]
[    1.192227] pci_bus 0000:00: on NUMA node 0
[    1.195950] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    1.195959] pci 0000:01:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[    1.195967] pci 0000:01:00.0: vgaarb: bridge control possible
[    1.195968] vgaarb: loaded
[    1.196840] SCSI subsystem initialized
[    1.197038] libata version 3.00 loaded.
[    1.197119] ACPI: bus type USB registered
[    1.197188] usbcore: registered new interface driver usbfs
[    1.197222] usbcore: registered new interface driver hub
[    1.197266] usbcore: registered new device driver usb
[    1.197454] EDAC MC: Ver: 3.0.0
[    1.197923] PCI: Using ACPI for IRQ routing
[    1.197934] PCI: pci_cache_line_size set to 32 bytes
[    1.198015] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    1.198021] e820: reserve RAM buffer [mem 0x3ffec000-0x3fffffff]
[    1.198415] NetLabel: Initializing
[    1.198418] NetLabel:  domain hash size = 128
[    1.198420] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.198475] NetLabel:  unlabeled traffic allowed by default
[    1.199161] clocksource: Switched to clocksource refined-jiffies
[    1.263660] VFS: Disk quotas dquot_6.6.0
[    1.263776] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.264254] AppArmor: AppArmor Filesystem Enabled
[    1.264488] pnp: PnP ACPI init
[    1.265084] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    1.265093] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    1.265100] system 00:00: [mem 0x00100000-0x3fffffff] could not be reserved
[    1.265107] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[    1.265123] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.265675] system 00:01: [io  0x03f0-0x03f1] has been reserved
[    1.265682] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    1.265692] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.265866] system 00:02: [io  0xe400-0xe43f] has been reserved
[    1.265873] system 00:02: [io  0xe800-0xe80f] has been reserved
[    1.265882] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.266112] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.266804] pnp 00:04: [dma 2]
[    1.266919] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.268891] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.269663] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.269695] pnp: PnP ACPI: found 7 devices
[    1.269704] PnPBIOS: Disabled
[    1.310602] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[    1.310648] clocksource: Switched to clocksource acpi_pm
[    1.310741] pci 0000:00:09.0: BAR 6: assigned [mem
0x40000000-0x4001ffff pref]
[    1.310751] pci 0000:00:0a.0: BAR 6: assigned [mem
0x40020000-0x4002ffff pref]
[    1.310760] pci 0000:00:0e.0: BAR 6: assigned [mem
0x40030000-0x40033fff pref]
[    1.310772] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.310778] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    1.310787] pci 0000:00:01.0:   bridge window [mem 0xb6800000-0xb7dfffff]
[    1.310794] pci 0000:00:01.0:   bridge window [mem
0xb8000000-0xcfffffff pref]
[    1.310807] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.310816] pci 0000:00:0b.0:   bridge window [mem 0xb5000000-0xb57fffff]
[    1.310831] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.310837] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.310842] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.310847] pci_bus 0000:00: resource 7 [mem 0x40000000-0xffffffff window]
[    1.310852] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    1.310857] pci_bus 0000:01: resource 1 [mem 0xb6800000-0xb7dfffff]
[    1.310862] pci_bus 0000:01: resource 2 [mem 0xb8000000-0xcfffffff pref]
[    1.310867] pci_bus 0000:02: resource 1 [mem 0xb5000000-0xb57fffff]
[    1.311111] NET: Registered protocol family 2
[    1.311860] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.311963] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.312223] TCP: Hash tables configured (established 8192 bind 8192)
[    1.312505] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.312568] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.312856] NET: Registered protocol family 1
[    1.312919] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.313947] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
[    1.313954] PCI: setting IRQ 4 as level-triggered
[    1.314341] pci 0000:01:00.0: Video device with shadowed ROM at
[mem 0x000c0000-0x000dffff]
[    1.315557] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    1.315562] PCI: setting IRQ 11 as level-triggered
[    1.316251] PCI: CLS 32 bytes, default 32
[    1.316498] Unpacking initramfs...
[    4.193434] Freeing initrd memory: 39804K
[    4.194180] Scanning for low memory corruption every 60 seconds
[    4.195486] audit: initializing netlink subsys (disabled)
[    4.196644] Initialise system trusted keyrings
[    4.196768] audit: type=2000 audit(1495394207.084:1):
state=initialized audit_enabled=0 res=1
[    4.196827] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    4.202405] zbud: loaded
[    4.204110] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.204879] fuse init (API version 7.26)
[    4.209971] Key type asymmetric registered
[    4.209979] Asymmetric key parser 'x509' registered
[    4.210046] bounce: pool size: 64 pages
[    4.210114] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 247)
[    4.210269] io scheduler noop registered
[    4.210273] io scheduler deadline registered
[    4.210524] io scheduler cfq registered (default)
[    4.210528] io scheduler kyber registered
[    4.211250] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    4.211254] vesafb: scrolling: redraw
[    4.211259] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    4.211315] vesafb: framebuffer at 0xc8000000, mapped to
0xf8600000, using 3072k, total 3072k
[    4.224397] Console: switching to colour frame buffer device 128x48
[    4.236841] fb0: VESA VGA frame buffer device
[    4.237009] intel_idle: does not run on family 6 model 8
[    4.237256] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    4.237305] ACPI: Power Button [PWRB]
[    4.237467] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    4.237479] ACPI: Power Button [PWRF]
[    4.237583] sched_clock: Marking unstable (4124012145,
110772811)<-(4228105529, 6679427)
[    4.237601] tsc: Marking TSC unstable due to TSC halts in idle
[    4.238179] GHES: HEST is not enabled!
[    4.238305] isapnp: Scanning for PnP cards...
[    4.348148] pnp 01:01.00: increased option port range from
0x388-0x388 to 0x388-0x3f8
[    4.348156] pnp 01:01.00: increased option port range from
0x388-0x388 to 0x388-0x3f8
[    4.348162] pnp 01:01.00: increased option port range from
0x388-0x388 to 0x388-0x3f8
[    4.348313]  01:01: card 'Creative ViBRA16C PnP'
[    4.348317] isapnp: 1 Plug & Play card detected total
[    4.348684] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.354011] Linux agpgart interface v0.103
[    4.354274] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[    4.369648] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    4.378880] loop: module loaded
[    4.379385] ata_piix 0000:00:04.1: version 2.13
[    4.381573] scsi host0: ata_piix
[    4.381910] scsi host1: ata_piix
[    4.382061] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[    4.382066] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[    4.382402] libphy: Fixed MDIO Bus: probed
[    4.382406] tun: Universal TUN/TAP device driver, 1.6
[    4.382955] PPP generic driver version 2.4.2
[    4.383165] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.383179] ehci-pci: EHCI PCI platform driver
[    4.383242] ehci-platform: EHCI generic platform driver
[    4.383272] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.383279] ohci-pci: OHCI PCI platform driver
[    4.383322] ohci-platform: OHCI generic platform driver
[    4.383346] uhci_hcd: USB Universal Host Controller Interface driver
[    4.383857] uhci_hcd 0000:00:04.2: UHCI Host Controller
[    4.383883] uhci_hcd 0000:00:04.2: new USB bus registered, assigned
bus number 1
[    4.383901] uhci_hcd 0000:00:04.2: detected 2 ports
[    4.383942] uhci_hcd 0000:00:04.2: irq 4, io base 0x0000b400
[    4.384190] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    4.384196] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.384200] usb usb1: Product: UHCI Host Controller
[    4.384204] usb usb1: Manufacturer: Linux 4.12.0-041200rc1-generic uhci_hcd
[    4.384209] usb usb1: SerialNumber: 0000:00:04.2
[    4.384663] hub 1-0:1.0: USB hub found
[    4.384691] hub 1-0:1.0: 2 ports detected
[    4.385578] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    4.385600] xhci_hcd 0000:02:00.0: new USB bus registered, assigned
bus number 2
[    4.390981] ata2: port disabled--ignoring
[    4.391185] xhci_hcd 0000:02:00.0: hcc params 0x014051cf hci
version 0x100 quirks 0x00000090
[    4.391579] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.391585] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.391590] usb usb2: Product: xHCI Host Controller
[    4.391594] usb usb2: Manufacturer: Linux 4.12.0-041200rc1-generic xhci-hcd
[    4.391598] usb usb2: SerialNumber: 0000:02:00.0
[    4.392054] hub 2-0:1.0: USB hub found
[    4.392088] hub 2-0:1.0: 2 ports detected
[    4.392444] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    4.392459] xhci_hcd 0000:02:00.0: new USB bus registered, assigned
bus number 3
[    4.394473] usb usb3: We don't know the algorithms for LPM for this
host, disabling LPM.
[    4.394571] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    4.394576] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.394581] usb usb3: Product: xHCI Host Controller
[    4.394585] usb usb3: Manufacturer: Linux 4.12.0-041200rc1-generic xhci-hcd
[    4.394589] usb usb3: SerialNumber: 0000:02:00.0
[    4.395054] hub 3-0:1.0: USB hub found
[    4.395083] hub 3-0:1.0: 2 ports detected
[    4.395619] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[    4.398883] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.398915] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.399377] mousedev: PS/2 mouse device common for all mice
[    4.399821] rtc_cmos 00:03: RTC can wake from S4
[    4.400036] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.400068] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram
[    4.400094] i2c /dev entries driver
[    4.400301] device-mapper: uevent: version 1.0.3
[    4.400569] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-devel@xxxxxxxxxx
[    4.400667] platform eisa.0: Probing EISA bus 0
[    4.400676] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    4.400682] platform eisa.0: Cannot allocate resource for EISA slot 1
[    4.400687] platform eisa.0: Cannot allocate resource for EISA slot 2
[    4.400692] platform eisa.0: Cannot allocate resource for EISA slot 3
[    4.400697] platform eisa.0: Cannot allocate resource for EISA slot 4
[    4.400702] platform eisa.0: Cannot allocate resource for EISA slot 5
[    4.400706] platform eisa.0: Cannot allocate resource for EISA slot 6
[    4.400711] platform eisa.0: Cannot allocate resource for EISA slot 7
[    4.400716] platform eisa.0: Cannot allocate resource for EISA slot 8
[    4.400721] platform eisa.0: EISA: Detected 0 cards
[    4.400740] cpufreq_nforce2: No nForce2 chipset
[    4.400780] ledtrig-cpu: registered to indicate activity on CPUs
[    4.401564] NET: Registered protocol family 10
[    4.422737] Segment Routing with IPv6
[    4.422924] NET: Registered protocol family 17
[    4.422973] Key type dns_resolver registered
[    4.423643] microcode: sig=0x686, pf=0x1, revision=0x7
[    4.423813] microcode: Microcode Update Driver: v2.2.
[    4.423827] Using IPI No-Shortcut mode
[    4.424292] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[    4.424786] registered taskstats version 1
[    4.424840] Loading compiled-in X.509 certificates
[    4.445771] Loaded X.509 cert 'Build time autogenerated kernel key:
81d16a21a4ae649d92b28b332e6d6e1a2e272e73'
[    4.445859] zswap: loaded using pool lzo/zbud
[    4.505370] Key type big_key registered
[    4.505388] Key type trusted registered
[    4.515020] Key type encrypted registered
[    4.515034] AppArmor: AppArmor sha1 policy hashing enabled
[    4.515045] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    4.515140] evm: HMAC attrs: 0x1
[    4.515636]   Magic number: 1:308:294
[    4.515674] ata_device dev2.0: hash matches
[    4.515677]  dev2.0: hash matches
[    4.515698] misc hpet: hash matches
[    4.515745] tty tty27: hash matches
[    4.515875] rtc_cmos 00:03: setting system clock to 2017-05-21
19:16:47 UTC (1495394207)
[    4.516248] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.516251] EDD information not available.
[    4.516334] PM: Hibernation image not present or could not be loaded.
[    4.539334] ata1.00: ATAPI: HL-DT-ST RW/DVD GCC-4521B, 1.07, max UDMA/33
[    4.544003] ata1.00: configured for UDMA/33
[    4.545264] scsi 0:0:0:0: CD-ROM            HL-DT-ST RW/DVD
GCC-4521B 1.07 PQ: 0 ANSI: 5
[    4.567682] sr 0:0:0:0: [sr0] scsi3-mmc drive: 52x/52x writer cd/rw
xa/form2 cdda tray
[    4.567689] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.568307] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    4.568606] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    4.576045] Freeing unused kernel memory: 1036K
[    4.576284] Write protecting the kernel text: 8220k
[    4.576546] Write protecting the kernel read-only data: 3312k
[    4.637970] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.638385] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.638452] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.648073] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.648840] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.652288] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.652626] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.654234] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.654603] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.655157] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.042373] Floppy drive(s): fd0 is 1.44M
[    5.062859] FDC 0 is a post-1991 82077
[    5.152854] pata_pdc2027x 0000:00:0e.0: version 1.0
[    5.154237] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 15
[    5.154243] PCI: setting IRQ 15 as level-triggered
[    5.253529] pata_pdc2027x 0000:00:0e.0: PLL input clock 16690 kHz
[    5.283556] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0xe724a18a53, max_idle_ns: 440795212787 ns
[    5.834975] scsi host2: pata_pdc2027x
[    5.854078] scsi host3: pata_pdc2027x
[    5.854356] ata3: PATA max UDMA/133 mmio m16384@0xb4800000 cmd
0xb48017c0 irq 15
[    5.854362] ata4: PATA max UDMA/133 mmio m16384@0xb4800000 cmd
0xb48015c0 irq 15
[    5.855261] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    5.855275] 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not
an 8139C+ compatible chip, use 8139too
[    5.859395] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.859873] r8169 0000:00:09.0 (unnamed net_device)
(uninitialized): not PCI Express
[    5.860596] r8169 0000:00:09.0 eth0: RTL8169sb/8110sb at
0xf8467000, 48:02:2a:07:34:3e, XID 10000000 IRQ 4
[    5.860603] r8169 0000:00:09.0 eth0: jumbo features [frames: 7152
bytes, tx checksumming: ok]
[    5.866757] r8169 0000:00:09.0 enp0s9: renamed from eth0
[    5.896485] [drm] radeon kernel modesetting enabled.
[    5.896676] checking generic (c8000000 300000) vs hw (c8000000 8000000)
[    5.896679] fb: switching to radeondrmfb from VESA VGA
[    5.896778] Console: switching to colour dummy device 80x25
[    5.900820] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    5.900828] PCI: setting IRQ 10 as level-triggered
[    5.902394] [drm] initializing kernel modesetting (R350
0x1002:0x4E48 0x1002:0x0002 0x00).
[    5.902405] [drm] Forcing AGP to PCI mode
[    5.903838] [drm] Generation 1 PCI interface in multifunction mode
[    5.903842] [drm] Limiting VRAM to one aperture
[    5.903859] radeon 0000:01:00.0: VRAM: 128M 0x00000000C8000000 -
0x00000000CFFFFFFF (128M used)
[    5.903866] radeon 0000:01:00.0: GTT: 512M 0x00000000A8000000 -
0x00000000C7FFFFFF
[    5.907015] [drm] Detected VRAM RAM=128M, BAR=128M
[    5.907022] [drm] RAM width 256bits DDR
[    5.907170] 8139too: 8139too Fast Ethernet driver 0.9.28
[    5.909583] 8139too 0000:00:0a.0 eth0: RealTek RTL8139 at
0x0001a800, 00:50:fc:ab:a9:72, IRQ 15
[    5.909703] [TTM] Zone  kernel: Available graphics memory: 443732 kiB
[    5.909706] [TTM] Zone highmem: Available graphics memory: 511280 kiB
[    5.909708] [TTM] Initializing pool allocator
[    5.909724] [TTM] Initializing DMA pool allocator
[    5.909823] [drm] radeon: 128M of VRAM memory ready
[    5.909827] [drm] radeon: 512M of GTT memory ready.
[    5.909874] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    5.917018] 8139too 0000:00:0a.0 enp0s10: renamed from eth0
[    5.933078] [drm] radeon: 2 quad pipes, 1 Z pipes initialized
[    5.933090] [drm] PCI GART of 512M enabled (table at 0x0000000035880000).
[    5.933187] radeon 0000:01:00.0: WB enabled
[    5.933197] radeon 0000:01:00.0: fence driver on ring 0 use gpu
addr 0x00000000a8000000 and cpu addr 0xf54a4000
[    5.933201] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.933203] [drm] Driver supports precise vblank timestamp query.
[    5.933236] [drm] radeon: irq initialized.
[    5.933250] [drm] Loading R300 Microcode
[    5.933775] [drm] radeon: ring at 0x00000000A8001000
[    5.933812] [drm] ring test succeeded in 1 usecs
[    5.934230] [drm] ib test succeeded in 0 usecs
[    5.937431] [drm] No TV DAC info found in BIOS
[    5.938977] [drm] Radeon Display Connectors
[    5.938984] [drm] Connector 0:
[    5.938987] [drm]   VGA-1
[    5.938992] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    5.938993] [drm]   Encoders:
[    5.938995] [drm]     CRT1: INTERNAL_DAC1
[    5.938998] [drm] Connector 1:
[    5.939000] [drm]   DVI-I-1
[    5.939001] [drm]   HPD1
[    5.939005] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    5.939007] [drm]   Encoders:
[    5.939009] [drm]     CRT2: INTERNAL_DAC2
[    5.939011] [drm]     DFP1: INTERNAL_TMDS1
[    5.939013] [drm] Connector 2:
[    5.939014] [drm]   SVIDEO-1
[    5.939016] [drm]   Encoders:
[    5.939017] [drm]     TV1: INTERNAL_DAC2
[    6.013763] [drm] fb mappable at 0xC8040000
[    6.013767] [drm] vram apper at 0xC8000000
[    6.013769] [drm] size 8294400
[    6.013771] [drm] fb depth is 24
[    6.013773] [drm]    pitch is 7680
[    6.014529] fbcon: radeondrmfb (fb0) is primary device
[    6.073122] Console: switching to colour frame buffer device 240x67
[    6.106161] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    6.106760] [drm] Initialized radeon 2.50.0 20080528 for
0000:01:00.0 on minor 0
[    6.106878] ata3.00: ATA-6: ST3120022A, 3.76, max UDMA/100
[    6.106885] ata3.00: 234441648 sectors, multi 16: LBA48
[    6.131527] ata3.00: configured for UDMA/100
[    6.132123] scsi 2:0:0:0: Direct-Access     ATA      ST3120022A
  3.76 PQ: 0 ANSI: 5
[    6.133097] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks:
(120 GB/112 GiB)
[    6.133148] sd 2:0:0:0: [sda] Write Protect is off
[    6.133154] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.133234] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    6.134341] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    6.163230]  sda: sda1 sda2 sda3 sda4
[    6.164786] sd 2:0:0:0: [sda] Attached SCSI disk
[    6.620670] random: fast init done
[    6.943132] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input4
[    7.601406] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null)
[    9.004935] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.091078] systemd[1]: systemd 232 running in system mode. (+PAM
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    9.091567] systemd[1]: Detected architecture x86.
[    9.098901] systemd[1]: Set hostname to <karka-System-Name>.
[    9.860908] random: crng init done
[   10.982159] systemd[1]: Listening on udev Kernel Socket.
[   10.982673] systemd[1]: Reached target User and Group Name Lookups.
[   10.982765] systemd[1]: Reached target Remote File Systems.
[   10.983375] systemd[1]: Listening on Journal Audit Socket.
[   10.984100] systemd[1]: Created slice User and Session Slice.
[   10.984306] systemd[1]: Listening on fsck to fsckd communication Socket.
[   10.984483] systemd[1]: Listening on Syslog Socket.
[   11.882728] lp: driver loaded but no devices found
[   12.034088] ppdev: user-space parallel port driver
[   20.873049] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   21.107564] systemd-journald[221]: Received request to flush
runtime journal from PID 1
[   23.155444] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   23.172304] ACPI Warning: SystemIO range
0x000000000000E800-0x000000000000E808 conflicts with OpRegion
0x000000000000E800-0x000000000000E806 (\SM00) (20170303/utaddress-247)
[   23.172329] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[   26.919354] Adding 1465340k swap on /dev/sda2.  Priority:-1
extents:1 across:1465340k FS
[   27.576959] EXT4-fs (sda4): mounted filesystem with ordered data
mode. Opts: (null)
[   28.165044] audit: type=1400 audit(1495394231.149:2):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/lightdm/lightdm-guest-session" pid=554
comm="apparmor_parser"
[   28.165059] audit: type=1400 audit(1495394231.149:3):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=554
comm="apparmor_parser"
[   28.183035] audit: type=1400 audit(1495394231.166:4):
apparmor="STATUS" operation="profile_load" name="/sbin/dhclient"
pid=555 comm="apparmor_parser"
[   28.183049] audit: type=1400 audit(1495394231.167:5):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=555
comm="apparmor_parser"
[   28.183053] audit: type=1400 audit(1495394231.167:6):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=555
comm="apparmor_parser"
[   28.183057] audit: type=1400 audit(1495394231.167:7):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/connman/scripts/dhclient-script" pid=555
comm="apparmor_parser"
[   28.260680] audit: type=1400 audit(1495394231.244:8):
apparmor="STATUS" operation="profile_load" name="/usr/bin/evince"
pid=556 comm="apparmor_parser"
[   28.260690] audit: type=1400 audit(1495394231.244:9):
apparmor="STATUS" operation="profile_load"
name="/usr/bin/evince//sanitized_helper" pid=556
comm="apparmor_parser"
[   28.260693] audit: type=1400 audit(1495394231.244:10):
apparmor="STATUS" operation="profile_load"
name="/usr/bin/evince-previewer" pid=556 comm="apparmor_parser"
[   28.260697] audit: type=1400 audit(1495394231.244:11):
apparmor="STATUS" operation="profile_load"
name="/usr/bin/evince-previewer//sanitized_helper" pid=556
comm="apparmor_parser"
[   33.069281] IPv6: ADDRCONF(NETDEV_UP): enp0s9: link is not ready
[   33.079497] r8169 0000:00:09.0 enp0s9: link down
[   33.082468] IPv6: ADDRCONF(NETDEV_UP): enp0s9: link is not ready
[   33.261071] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
[   33.261396] 8139too 0000:00:0a.0 enp0s10: link up, 100Mbps,
full-duplex, lpa 0x45E1


**************************************************************************************************************************************************

dmesg.4.12-rc1.with_pendrive_connected_at_boot:


[    0.000000] Linux version 4.12.0-041200rc1-generic (kernel@gomeisa)
(gcc version 6.3.0 20170510 (Ubuntu 6.3.0-17ubuntu1) ) #201705131731
SMP Sat May 13 21:48:41 UTC 2017
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffebfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffec000-0x000000003ffeefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003ffef000-0x000000003fffefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: System Manufacturer System Name/<P3B-F>, BIOS ASUS
P3B-F ACPI BIOS Revision 1008 Beta 004 10/15/2001
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3ffec max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-AFFFF uncachable
[    0.000000]   B0000-BFFFF write-combining
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 0C8000000 mask FF8000000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: PAT not supported by CPU.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x1d3fffff]
[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[    0.000000] BRK [0x1cefe000, 0x1cefefff] PGTABLE
[    0.000000] BRK [0x1ceff000, 0x1cefffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x33231000-0x3590ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F5A60 000014 (v00 ASUS  )
[    0.000000] ACPI: RSDT 0x000000003FFEC000 00002C (v01 ASUS   P3B_F
  30303031 MSFT 31313031)
[    0.000000] ACPI: FACP 0x000000003FFEC080 000074 (v01 ASUS   P3B_F
  30303031 MSFT 31313031)
[    0.000000] ACPI: DSDT 0x000000003FFEC100 00263A (v01 ASUS   P3B_F
  00001000 MSFT 0100000B)
[    0.000000] ACPI: FACS 0x000000003FFFF000 000040
[    0.000000] ACPI: BOOT 0x000000003FFEC040 000028 (v01 ASUS   P3B_F
  30303031 MSFT 31313031)
[    0.000000] 131MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x000000003ffebfff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003ffebfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffebfff]
[    0.000000] On node 0 totalpages: 262025
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 33774 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0xe408
[    0.000000] Local APIC disabled by BIOS -- reenabling.
[    0.000000] Found and enabled local APIC!
[    0.000000] smpboot: Boot CPU (id 0) not listed by BIOS
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xfffeffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1
nr_node_ids:1
[    0.000000] percpu: Embedded 23 pages/cpu @f71e4000 s65356 r0 d28852 u94208
[    0.000000] pcpu-alloc: s65356 r0 d28852 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 259795
[    0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-4.12.0-041200rc1-generic
root=UUID=ac8baa2d-9112-40e2-ad06-15c78dd2d616 ro quiet splash lapic
radeon.agpmode=-1 vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003ffec)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 981720K/1048100K available (8218K kernel code,
878K rwdata, 3304K rodata, 1036K init, 860K bss, 66380K reserved, 0K
cma-reserved, 135096K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff0d000 - 0xfffff000   ( 968 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xdcc31000 - 0xdcd34000   (1036 kB)
                     .data : 0xdc806837 - 0xdcc1eb80   (4192 kB)
                     .text : 0xdc000000 - 0xdc806837   (8218 kB)
[    0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 35775 entries in 70 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:32 16
[    0.000000] CPU 0 irqstacks, hard=f6cc0000 soft=f6cc2000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 1048576 bytes of page_ext
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1002.239 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated
using timer frequency.. 2004.47 BogoMIPS (lpj=4008956)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170303
[    0.012116] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.012135] ACPI: setting ELCR to 0200 (from 8c10)
[    0.012261] Security Framework initialized
[    0.012269] Yama: becoming mindful.
[    0.012335] AppArmor: AppArmor initialized
[    0.012478] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.012484] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.013361] mce: CPU supports 5 MCE banks
[    0.013405] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[    0.013409] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.029786] Freeing SMP alternatives memory: 32K
[    0.033943] smpboot: Max logical packages: 1
[    0.033956] smpboot: SMP motherboard not detected
[    0.033958] smpboot: SMP disabled
[    0.033963] Enabling APIC mode:  Flat.  Using 0 I/O APICs
[    0.036000] Performance Events: p6 PMU driver.
[    0.036000] ... version:                0
[    0.036000] ... bit width:              32
[    0.036000] ... generic registers:      2
[    0.036000] ... value mask:             00000000ffffffff
[    0.036000] ... max period:             000000007fffffff
[    0.036000] ... fixed-purpose events:   0
[    0.036000] ... event mask:             0000000000000003
[    0.036000] smp: Bringing up secondary CPUs ...
[    0.036000] smp: Brought up 1 node, 1 CPU
[    0.036000] smpboot: Total of 1 processors activated (2004.47 BogoMIPS)
[    0.036000] sched_clock: Marking stable (32000000, 0)->(25320247, 6679753)
[    0.144215] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[    0.144617] devtmpfs: initialized
[    0.145408] evm: security.selinux
[    0.145410] evm: security.SMACK64
[    0.145412] evm: security.SMACK64EXEC
[    0.145414] evm: security.SMACK64TRANSMUTE
[    0.145415] evm: security.SMACK64MMAP
[    0.145417] evm: security.ima
[    0.145419] evm: security.capability
[    0.145826] PM: Registering ACPI NVS region [mem
0x3ffff000-0x3fffffff] (4096 bytes)
[    0.146018] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.146030] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.146178] pinctrl core: initialized pinctrl subsystem
[    0.146508] RTC time: 19:24:11, date: 05/21/17
[    0.146924] NET: Registered protocol family 16
[    0.147827] EISA bus registered
[    0.147834] cpuidle: using governor ladder
[    0.147837] cpuidle: using governor menu
[    0.147842] PCCT header not found.
[    0.148195] Simple Boot Flag at 0x3a set to 0x1
[    0.148234] ACPI: bus type PCI registered
[    0.148241] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.153198] PCI: PCI BIOS revision 2.10 entry at 0xf08c0, last bus=2
[    0.153201] PCI: Using configuration type 1 for base access
[    0.158942] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.159991] ACPI: Added _OSI(Module Device)
[    0.159997] ACPI: Added _OSI(Processor Device)
[    0.160001] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.160049] ACPI: Added _OSI(Processor Aggregator Device)
[    0.164851] ACPI: Interpreter enabled
[    0.164944] ACPI: (supports S0 S1 S3 S4 S5)
[    0.164949] ACPI: Using PIC for interrupt routing
[    0.165013] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[    0.179374] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10
11 12 14 15)
[    0.179635] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10
*11 12 14 15)
[    0.179889] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11
12 14 *15)
[    0.180180] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10
11 12 14 15)
[    0.180449] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.180465] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.180482] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.180493] acpi PNP0A03:00: fail to add MMCONFIG information,
can't access extended PCI configuration space under this bridge.
[    0.180698] acpi PNP0A03:00: ignoring host bridge window [mem
0x000c8000-0x000dffff window] (conflicts with Video ROM [mem
0x000c0000-0x000ccfff])
[    0.180995] PCI host bridge to bus 0000:00
[    0.181004] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.181009] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.181014] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[    0.181019] pci_bus 0000:00: root bus resource [mem
0x40000000-0xffffffff window]
[    0.181025] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.181051] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[    0.181073] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.181323] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[    0.181506] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[    0.181761] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[    0.181813] pci 0000:00:04.1: reg 0x20: [io  0xb800-0xb80f]
[    0.181840] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.181844] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.181848] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.181853] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.182038] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[    0.182090] pci 0000:00:04.2: reg 0x20: [io  0xb400-0xb41f]
[    0.182200] pci 0000:00:04.2: System wakeup disabled by ACPI
[    0.182320] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[    0.182326] * Found PM-Timer Bug on the chipset. Due to workarounds
for a bug,
               * this clock source is slow. Consider trying other clock sources
[    0.182407] pci 0000:00:04.3: quirk: [io  0xe400-0xe43f] claimed by
PIIX4 ACPI
[    0.182414] pci 0000:00:04.3: quirk: [io  0xe800-0xe80f] claimed by PIIX4 SMB
[    0.182601] pci 0000:00:09.0: [10ec:8169] type 00 class 0x020000
[    0.182622] pci 0000:00:09.0: reg 0x10: [io  0xb000-0xb0ff]
[    0.182635] pci 0000:00:09.0: reg 0x14: [mem 0xb6000000-0xb60000ff]
[    0.182679] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.182719] pci 0000:00:09.0: supports D1 D2
[    0.182724] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
[    0.182887] pci 0000:00:0a.0: [10ec:8139] type 00 class 0x020000
[    0.182908] pci 0000:00:0a.0: reg 0x10: [io  0xa800-0xa8ff]
[    0.182921] pci 0000:00:0a.0: reg 0x14: [mem 0xb5800000-0xb58000ff]
[    0.182965] pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.183003] pci 0000:00:0a.0: supports D1 D2
[    0.183008] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold
[    0.183176] pci 0000:00:0b.0: [12d8:e111] type 01 class 0x060400
[    0.183423] pci 0000:00:0e.0: [105a:4d69] type 00 class 0x018085
[    0.183444] pci 0000:00:0e.0: reg 0x10: [io  0x9800-0x9807]
[    0.183457] pci 0000:00:0e.0: reg 0x14: [io  0x9400-0x9403]
[    0.183470] pci 0000:00:0e.0: reg 0x18: [io  0x9000-0x9007]
[    0.183483] pci 0000:00:0e.0: reg 0x1c: [io  0x8800-0x8803]
[    0.183496] pci 0000:00:0e.0: reg 0x20: [io  0x8400-0x840f]
[    0.183509] pci 0000:00:0e.0: reg 0x24: [mem 0xb4800000-0xb4803fff]
[    0.183522] pci 0000:00:0e.0: reg 0x30: [mem 0x00000000-0x00003fff pref]
[    0.183561] pci 0000:00:0e.0: supports D1
[    0.183794] pci 0000:01:00.0: [1002:4e48] type 00 class 0x030000
[    0.183815] pci 0000:01:00.0: reg 0x10: [mem 0xc8000000-0xcfffffff pref]
[    0.183828] pci 0000:01:00.0: reg 0x14: [io  0xd800-0xd8ff]
[    0.183840] pci 0000:01:00.0: reg 0x18: [mem 0xb7000000-0xb700ffff]
[    0.183873] pci 0000:01:00.0: reg 0x30: [mem 0xc7fe0000-0xc7ffffff pref]
[    0.183916] pci 0000:01:00.0: supports D1 D2
[    0.184081] pci 0000:01:00.1: [1002:4e68] type 00 class 0x038000
[    0.184100] pci 0000:01:00.1: reg 0x10: [mem 0xb8000000-0xbfffffff pref]
[    0.184112] pci 0000:01:00.1: reg 0x14: [mem 0xb6800000-0xb680ffff]
[    0.184184] pci 0000:01:00.1: supports D1 D2
[    0.184319] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.184327] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.184334] pci 0000:00:01.0:   bridge window [mem 0xb6800000-0xb7dfffff]
[    0.184341] pci 0000:00:01.0:   bridge window [mem
0xb8000000-0xcfffffff pref]
[    0.184486] pci 0000:02:00.0: [1912:0015] type 00 class 0x0c0330
[    0.184532] pci 0000:02:00.0: reg 0x10: [mem 0xb5000000-0xb5001fff 64bit]
[    0.184764] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.568096] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.568112] pci 0000:00:0b.0:   bridge window [mem 0xb5000000-0xb57fffff]
[    0.568137] pci_bus 0000:00: on NUMA node 0
[    0.571841] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    0.571850] pci 0000:01:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[    0.571859] pci 0000:01:00.0: vgaarb: bridge control possible
[    0.571861] vgaarb: loaded
[    0.572728] SCSI subsystem initialized
[    0.572951] libata version 3.00 loaded.
[    0.573032] ACPI: bus type USB registered
[    0.573102] usbcore: registered new interface driver usbfs
[    0.573136] usbcore: registered new interface driver hub
[    0.573182] usbcore: registered new device driver usb
[    0.573365] EDAC MC: Ver: 3.0.0
[    0.573847] PCI: Using ACPI for IRQ routing
[    0.573859] PCI: pci_cache_line_size set to 32 bytes
[    0.573946] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.573952] e820: reserve RAM buffer [mem 0x3ffec000-0x3fffffff]
[    0.574347] NetLabel: Initializing
[    0.574351] NetLabel:  domain hash size = 128
[    0.574353] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.574408] NetLabel:  unlabeled traffic allowed by default
[    0.575094] clocksource: Switched to clocksource refined-jiffies
[    0.639589] VFS: Disk quotas dquot_6.6.0
[    0.639709] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.640185] AppArmor: AppArmor Filesystem Enabled
[    0.640423] pnp: PnP ACPI init
[    0.641021] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.641030] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.641036] system 00:00: [mem 0x00100000-0x3fffffff] could not be reserved
[    0.641044] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[    0.641060] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.641609] system 00:01: [io  0x03f0-0x03f1] has been reserved
[    0.641616] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.641626] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.641798] system 00:02: [io  0xe400-0xe43f] has been reserved
[    0.641805] system 00:02: [io  0xe800-0xe80f] has been reserved
[    0.641814] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.642043] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.642740] pnp 00:04: [dma 2]
[    0.642854] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.644823] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.645597] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.645628] pnp: PnP ACPI: found 7 devices
[    0.645638] PnPBIOS: Disabled
[    0.686543] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[    0.686589] clocksource: Switched to clocksource acpi_pm
[    0.686680] pci 0000:00:09.0: BAR 6: assigned [mem
0x40000000-0x4001ffff pref]
[    0.686690] pci 0000:00:0a.0: BAR 6: assigned [mem
0x40020000-0x4002ffff pref]
[    0.686699] pci 0000:00:0e.0: BAR 6: assigned [mem
0x40030000-0x40033fff pref]
[    0.686711] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.686718] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.686726] pci 0000:00:01.0:   bridge window [mem 0xb6800000-0xb7dfffff]
[    0.686733] pci 0000:00:01.0:   bridge window [mem
0xb8000000-0xcfffffff pref]
[    0.686746] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    0.686755] pci 0000:00:0b.0:   bridge window [mem 0xb5000000-0xb57fffff]
[    0.686770] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.686775] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.686780] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.686785] pci_bus 0000:00: resource 7 [mem 0x40000000-0xffffffff window]
[    0.686790] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    0.686795] pci_bus 0000:01: resource 1 [mem 0xb6800000-0xb7dfffff]
[    0.686800] pci_bus 0000:01: resource 2 [mem 0xb8000000-0xcfffffff pref]
[    0.686806] pci_bus 0000:02: resource 1 [mem 0xb5000000-0xb57fffff]
[    0.687047] NET: Registered protocol family 2
[    0.687783] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.687886] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.688144] TCP: Hash tables configured (established 8192 bind 8192)
[    0.688424] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.688485] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.688774] NET: Registered protocol family 1
[    0.688838] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.689865] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
[    0.689871] PCI: setting IRQ 4 as level-triggered
[    0.690256] pci 0000:01:00.0: Video device with shadowed ROM at
[mem 0x000c0000-0x000dffff]
[    0.691476] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    0.691481] PCI: setting IRQ 11 as level-triggered
[    0.692249] PCI: CLS 32 bytes, default 32
[    0.692500] Unpacking initramfs...
[    3.570426] Freeing initrd memory: 39804K
[    3.571261] Scanning for low memory corruption every 60 seconds
[    3.572450] audit: initializing netlink subsys (disabled)
[    3.573609] Initialise system trusted keyrings
[    3.573740] audit: type=2000 audit(1495394654.461:1):
state=initialized audit_enabled=0 res=1
[    3.573802] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    3.579511] zbud: loaded
[    3.581048] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    3.581808] fuse init (API version 7.26)
[    3.587052] Key type asymmetric registered
[    3.587060] Asymmetric key parser 'x509' registered
[    3.587127] bounce: pool size: 64 pages
[    3.587192] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 247)
[    3.587344] io scheduler noop registered
[    3.587348] io scheduler deadline registered
[    3.587597] io scheduler cfq registered (default)
[    3.587601] io scheduler kyber registered
[    3.588234] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    3.588238] vesafb: scrolling: redraw
[    3.588244] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    3.588300] vesafb: framebuffer at 0xc8000000, mapped to
0xf8600000, using 3072k, total 3072k
[    3.601370] Console: switching to colour frame buffer device 128x48
[    3.613816] fb0: VESA VGA frame buffer device
[    3.613940] intel_idle: does not run on family 6 model 8
[    3.614186] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    3.614235] ACPI: Power Button [PWRB]
[    3.614398] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    3.614410] ACPI: Power Button [PWRF]
[    3.614514] sched_clock: Marking unstable (3500012704,
110663529)<-(3603996480, 6679753)
[    3.614531] tsc: Marking TSC unstable due to TSC halts in idle
[    3.615370] GHES: HEST is not enabled!
[    3.615499] isapnp: Scanning for PnP cards...
[    3.725163] pnp 01:01.00: increased option port range from
0x388-0x388 to 0x388-0x3f8
[    3.725170] pnp 01:01.00: increased option port range from
0x388-0x388 to 0x388-0x3f8
[    3.725176] pnp 01:01.00: increased option port range from
0x388-0x388 to 0x388-0x3f8
[    3.725324]  01:01: card 'Creative ViBRA16C PnP'
[    3.725328] isapnp: 1 Plug & Play card detected total
[    3.725695] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    3.731071] Linux agpgart interface v0.103
[    3.731337] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[    3.746702] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    3.755882] loop: module loaded
[    3.756384] ata_piix 0000:00:04.1: version 2.13
[    3.758552] scsi host0: ata_piix
[    3.759001] scsi host1: ata_piix
[    3.759155] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[    3.759160] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[    3.759492] libphy: Fixed MDIO Bus: probed
[    3.759495] tun: Universal TUN/TAP device driver, 1.6
[    3.759946] PPP generic driver version 2.4.2
[    3.760143] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.760159] ehci-pci: EHCI PCI platform driver
[    3.760220] ehci-platform: EHCI generic platform driver
[    3.760250] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.760257] ohci-pci: OHCI PCI platform driver
[    3.760300] ohci-platform: OHCI generic platform driver
[    3.760325] uhci_hcd: USB Universal Host Controller Interface driver
[    3.760835] uhci_hcd 0000:00:04.2: UHCI Host Controller
[    3.760860] uhci_hcd 0000:00:04.2: new USB bus registered, assigned
bus number 1
[    3.760879] uhci_hcd 0000:00:04.2: detected 2 ports
[    3.760919] uhci_hcd 0000:00:04.2: irq 4, io base 0x0000b400
[    3.761170] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    3.761176] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    3.761180] usb usb1: Product: UHCI Host Controller
[    3.761184] usb usb1: Manufacturer: Linux 4.12.0-041200rc1-generic uhci_hcd
[    3.761189] usb usb1: SerialNumber: 0000:00:04.2
[    3.761646] hub 1-0:1.0: USB hub found
[    3.761673] hub 1-0:1.0: 2 ports detected
[    3.762590] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    3.762612] xhci_hcd 0000:02:00.0: new USB bus registered, assigned
bus number 2
[    4.014404] xhci_hcd 0000:02:00.0: Host halt failed, -19
[    4.014410] xhci_hcd 0000:02:00.0: can't setup: -19
[    4.015145] ata1.00: ATAPI: HL-DT-ST RW/DVD GCC-4521B, 1.07, max UDMA/33
[    4.015414] ata2: port disabled--ignoring
[    4.015774] xhci_hcd 0000:02:00.0: USB bus 2 deregistered
[    4.036586] xhci_hcd 0000:02:00.0: init 0000:02:00.0 fail, -19
[    4.036976] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[    4.039257] ata1.00: configured for UDMA/33
[    4.040998] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.041013] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.041512] mousedev: PS/2 mouse device common for all mice
[    4.041933] rtc_cmos 00:03: RTC can wake from S4
[    4.042136] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.042168] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram
[    4.042193] i2c /dev entries driver
[    4.042394] device-mapper: uevent: version 1.0.3
[    4.043440] scsi 0:0:0:0: CD-ROM            HL-DT-ST RW/DVD
GCC-4521B 1.07 PQ: 0 ANSI: 5
[    4.043583] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-devel@xxxxxxxxxx
[    4.043728] platform eisa.0: Probing EISA bus 0
[    4.043737] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    4.043743] platform eisa.0: Cannot allocate resource for EISA slot 1
[    4.043749] platform eisa.0: Cannot allocate resource for EISA slot 2
[    4.043753] platform eisa.0: Cannot allocate resource for EISA slot 3
[    4.043758] platform eisa.0: Cannot allocate resource for EISA slot 4
[    4.043763] platform eisa.0: Cannot allocate resource for EISA slot 5
[    4.043768] platform eisa.0: Cannot allocate resource for EISA slot 6
[    4.043773] platform eisa.0: Cannot allocate resource for EISA slot 7
[    4.043778] platform eisa.0: Cannot allocate resource for EISA slot 8
[    4.043782] platform eisa.0: EISA: Detected 0 cards
[    4.043800] cpufreq_nforce2: No nForce2 chipset
[    4.043841] ledtrig-cpu: registered to indicate activity on CPUs
[    4.044625] NET: Registered protocol family 10
[    4.066212] Segment Routing with IPv6
[    4.066294] NET: Registered protocol family 17
[    4.066331] Key type dns_resolver registered
[    4.066631] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[    4.067567] microcode: sig=0x686, pf=0x1, revision=0x7
[    4.067868] microcode: Microcode Update Driver: v2.2.
[    4.067883] Using IPI No-Shortcut mode
[    4.068707] sr 0:0:0:0: [sr0] scsi3-mmc drive: 52x/52x writer cd/rw
xa/form2 cdda tray
[    4.068714] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.069112] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    4.069474] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    4.069848] registered taskstats version 1
[    4.069885] Loading compiled-in X.509 certificates
[    4.090917] Loaded X.509 cert 'Build time autogenerated kernel key:
81d16a21a4ae649d92b28b332e6d6e1a2e272e73'
[    4.091010] zswap: loaded using pool lzo/zbud
[    4.148470] Key type big_key registered
[    4.148487] Key type trusted registered
[    4.157987] Key type encrypted registered
[    4.158000] AppArmor: AppArmor sha1 policy hashing enabled
[    4.158010] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    4.158118] evm: HMAC attrs: 0x1
[    4.168847]   Magic number: 1:961:445
[    4.169078] rtc_cmos 00:03: setting system clock to 2017-05-21
19:24:15 UTC (1495394655)
[    4.169389] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.169391] EDD information not available.
[    4.169488] PM: Hibernation image not present or could not be loaded.
[    4.176877] Freeing unused kernel memory: 1036K
[    4.177146] Write protecting the kernel text: 8220k
[    4.177410] Write protecting the kernel read-only data: 3312k
[    4.237869] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.238260] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.238324] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.248543] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.249356] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.252840] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.253181] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.255007] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.255417] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.255723] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.595466] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0xe725a3288f, max_idle_ns: 440795253303 ns
[    4.699091] Floppy drive(s): fd0 is 1.44M
[    4.725075] FDC 0 is a post-1991 82077
[    4.736057] pata_pdc2027x 0000:00:0e.0: version 1.0
[    4.737435] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 15
[    4.737440] PCI: setting IRQ 15 as level-triggered
[    4.836717] pata_pdc2027x 0000:00:0e.0: PLL input clock 16689 kHz
[    5.431732] scsi host2: pata_pdc2027x
[    5.451879] scsi host3: pata_pdc2027x
[    5.452169] ata3: PATA max UDMA/133 mmio m16384@0xb4800000 cmd
0xb48017c0 irq 15
[    5.452175] ata4: PATA max UDMA/133 mmio m16384@0xb4800000 cmd
0xb48015c0 irq 15
[    5.453015] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.453499] r8169 0000:00:09.0 (unnamed net_device)
(uninitialized): not PCI Express
[    5.454214] r8169 0000:00:09.0 eth0: RTL8169sb/8110sb at
0xf8452000, 48:02:2a:07:34:3e, XID 10000000 IRQ 4
[    5.454223] r8169 0000:00:09.0 eth0: jumbo features [frames: 7152
bytes, tx checksumming: ok]
[    5.456195] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    5.456213] 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not
an 8139C+ compatible chip, use 8139too
[    5.478502] r8169 0000:00:09.0 enp0s9: renamed from eth0
[    5.486417] [drm] radeon kernel modesetting enabled.
[    5.486602] checking generic (c8000000 300000) vs hw (c8000000 8000000)
[    5.486605] fb: switching to radeondrmfb from VESA VGA
[    5.486804] Console: switching to colour dummy device 80x25
[    5.490510] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    5.490518] PCI: setting IRQ 10 as level-triggered
[    5.492426] [drm] initializing kernel modesetting (R350
0x1002:0x4E48 0x1002:0x0002 0x00).
[    5.492437] [drm] Forcing AGP to PCI mode
[    5.493741] [drm] Generation 1 PCI interface in multifunction mode
[    5.493743] [drm] Limiting VRAM to one aperture
[    5.493759] radeon 0000:01:00.0: VRAM: 128M 0x00000000C8000000 -
0x00000000CFFFFFFF (128M used)
[    5.493765] radeon 0000:01:00.0: GTT: 512M 0x00000000A8000000 -
0x00000000C7FFFFFF
[    5.493812] [drm] Detected VRAM RAM=128M, BAR=128M
[    5.493815] [drm] RAM width 256bits DDR
[    5.496629] [TTM] Zone  kernel: Available graphics memory: 443748 kiB
[    5.496635] [TTM] Zone highmem: Available graphics memory: 511296 kiB
[    5.496637] [TTM] Initializing pool allocator
[    5.496653] [TTM] Initializing DMA pool allocator
[    5.496751] [drm] radeon: 128M of VRAM memory ready
[    5.496755] [drm] radeon: 512M of GTT memory ready.
[    5.496814] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    5.510206] 8139too: 8139too Fast Ethernet driver 0.9.28
[    5.512861] 8139too 0000:00:0a.0 eth0: RealTek RTL8139 at
0x0001a800, 00:50:fc:ab:a9:72, IRQ 15
[    5.517163] 8139too 0000:00:0a.0 enp0s10: renamed from eth0
[    5.523527] [drm] radeon: 2 quad pipes, 1 Z pipes initialized
[    5.523537] [drm] PCI GART of 512M enabled (table at 0x0000000035800000).
[    5.523619] radeon 0000:01:00.0: WB enabled
[    5.523628] radeon 0000:01:00.0: fence driver on ring 0 use gpu
addr 0x00000000a8000000 and cpu addr 0xf54a3000
[    5.523632] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.523634] [drm] Driver supports precise vblank timestamp query.
[    5.523662] [drm] radeon: irq initialized.
[    5.523677] [drm] Loading R300 Microcode
[    5.524176] [drm] radeon: ring at 0x00000000A8001000
[    5.524211] [drm] ring test succeeded in 1 usecs
[    5.524615] [drm] ib test succeeded in 0 usecs
[    5.527613] [drm] No TV DAC info found in BIOS
[    5.528965] [drm] Radeon Display Connectors
[    5.528970] [drm] Connector 0:
[    5.528973] [drm]   VGA-1
[    5.528977] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    5.528979] [drm]   Encoders:
[    5.528981] [drm]     CRT1: INTERNAL_DAC1
[    5.528983] [drm] Connector 1:
[    5.528985] [drm]   DVI-I-1
[    5.528987] [drm]   HPD1
[    5.528991] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    5.528992] [drm]   Encoders:
[    5.528994] [drm]     CRT2: INTERNAL_DAC2
[    5.528996] [drm]     DFP1: INTERNAL_TMDS1
[    5.528998] [drm] Connector 2:
[    5.529000] [drm]   SVIDEO-1
[    5.529001] [drm]   Encoders:
[    5.529003] [drm]     TV1: INTERNAL_DAC2
[    5.603789] [drm] fb mappable at 0xC8040000
[    5.603793] [drm] vram apper at 0xC8000000
[    5.603796] [drm] size 8294400
[    5.603797] [drm] fb depth is 24
[    5.603799] [drm]    pitch is 7680
[    5.604542] fbcon: radeondrmfb (fb0) is primary device
[    5.663137] Console: switching to colour frame buffer device 240x67
[    5.696209] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    5.696830] [drm] Initialized radeon 2.50.0 20080528 for
0000:01:00.0 on minor 0
[    5.696966] ata3.00: ATA-6: ST3120022A, 3.76, max UDMA/100
[    5.696972] ata3.00: 234441648 sectors, multi 16: LBA48
[    5.719309] ata3.00: configured for UDMA/100
[    5.720086] scsi 2:0:0:0: Direct-Access     ATA      ST3120022A
  3.76 PQ: 0 ANSI: 5
[    5.721063] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks:
(120 GB/112 GiB)
[    5.721113] sd 2:0:0:0: [sda] Write Protect is off
[    5.721120] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    5.721199] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    5.722303] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    5.753407]  sda: sda1 sda2 sda3 sda4
[    5.754980] sd 2:0:0:0: [sda] Attached SCSI disk
[    6.289919] random: fast init done
[    6.523691] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input4
[    7.208299] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null)
[    8.628407] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.714419] systemd[1]: systemd 232 running in system mode. (+PAM
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    8.715081] systemd[1]: Detected architecture x86.
[    8.722274] systemd[1]: Set hostname to <karka-System-Name>.
[    9.537803] random: crng init done
[   10.473046] systemd[1]: Set up automount Arbitrary Executable File
Formats File System Automount Point.
[   10.473456] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[   10.474192] systemd[1]: Created slice User and Session Slice.
[   10.474524] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.474641] systemd[1]: Reached target Remote File Systems.
[   10.474850] systemd[1]: Reached target User and Group Name Lookups.
[   10.475106] systemd[1]: Listening on udev Control Socket.
[   11.089729] lp: driver loaded but no devices found
[   11.191763] ppdev: user-space parallel port driver
[   20.229664] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   20.417753] systemd-journald[219]: Received request to flush
runtime journal from PID 1
[   21.969203] ACPI Warning: SystemIO range
0x000000000000E800-0x000000000000E808 conflicts with OpRegion
0x000000000000E800-0x000000000000E806 (\SM00) (20170303/utaddress-247)
[   21.969227] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[   22.007413] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   25.775554] Adding 1465340k swap on /dev/sda2.  Priority:-1
extents:1 across:1465340k FS
[   26.650094] EXT4-fs (sda4): mounted filesystem with ordered data
mode. Opts: (null)
[   27.237466] audit: type=1400 audit(1495394678.568:2):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/lightdm/lightdm-guest-session" pid=557
comm="apparmor_parser"
[   27.237478] audit: type=1400 audit(1495394678.568:3):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=557
comm="apparmor_parser"
[   27.253548] audit: type=1400 audit(1495394678.584:4):
apparmor="STATUS" operation="profile_load" name="/sbin/dhclient"
pid=558 comm="apparmor_parser"
[   27.253561] audit: type=1400 audit(1495394678.584:5):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=558
comm="apparmor_parser"
[   27.253564] audit: type=1400 audit(1495394678.584:6):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=558
comm="apparmor_parser"
[   27.253568] audit: type=1400 audit(1495394678.584:7):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/connman/scripts/dhclient-script" pid=558
comm="apparmor_parser"
[   27.332971] audit: type=1400 audit(1495394678.663:8):
apparmor="STATUS" operation="profile_load" name="/usr/bin/evince"
pid=559 comm="apparmor_parser"
[   27.332983] audit: type=1400 audit(1495394678.663:9):
apparmor="STATUS" operation="profile_load"
name="/usr/bin/evince//sanitized_helper" pid=559
comm="apparmor_parser"
[   27.332987] audit: type=1400 audit(1495394678.663:10):
apparmor="STATUS" operation="profile_load"
name="/usr/bin/evince-previewer" pid=559 comm="apparmor_parser"
[   27.332990] audit: type=1400 audit(1495394678.663:11):
apparmor="STATUS" operation="profile_load"
name="/usr/bin/evince-previewer//sanitized_helper" pid=559
comm="apparmor_parser"
[   30.018579] systemd[1]: motd-news.timer: Adding 9min 20.613954s random time.
[   30.020850] systemd[1]: apt-daily.timer: Adding 3min 31.966998s random time.
[   30.021214] systemd[1]: snapd.refresh.timer: Adding 1h 30min
6.955991s random time.
[   30.021250] systemd[1]: snapd.refresh.timer: Adding 4h 50min
16.834763s random time.
[   31.709174] systemd[1]: motd-news.timer: Adding 48min 15.498307s random time.
[   31.711786] systemd[1]: apt-daily.timer: Adding 10h 6min 56.366354s
random time.
[   31.712155] systemd[1]: snapd.refresh.timer: Adding 5h 23min
51.491841s random time.
[   31.712189] systemd[1]: snapd.refresh.timer: Adding 28min
47.413738s random time.
[   32.426593] IPv6: ADDRCONF(NETDEV_UP): enp0s9: link is not ready
[   32.443359] r8169 0000:00:09.0 enp0s9: link down
[   32.443494] IPv6: ADDRCONF(NETDEV_UP): enp0s9: link is not ready
[   32.589193] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
[   32.589516] 8139too 0000:00:0a.0 enp0s10: link up, 100Mbps,
full-duplex, lpa 0x45E1
[   46.315891] systemd[1]: motd-news.timer: Adding 23min 46.806096s random time.
[   46.318012] systemd[1]: apt-daily.timer: Adding 1h 57min 38.642829s
random time.
[   46.318376] systemd[1]: snapd.refresh.timer: Adding 3h 2min
29.415655s random time.
[   46.318411] systemd[1]: snapd.refresh.timer: Adding 2h 53min
55.730070s random time.
[   58.043515] systemd[1]: motd-news.timer: Adding 55min 16.202411s random time.
[   58.045527] systemd[1]: apt-daily.timer: Adding 7h 5min 6.689638s
random time.
[   58.045887] systemd[1]: snapd.refresh.timer: Adding 26min
58.898959s random time.
[   58.045922] systemd[1]: snapd.refresh.timer: Adding 5h 4min
151.529ms random time.


*************************************************************************************************************

lspci.4.12-rc1


00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
Host bridge (rev 03)
    Subsystem: ASUSTeK Computer Inc. 440BX/ZX/DX - 82443BX/ZX/DX Host bridge
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
    Latency: 64
    Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
    Capabilities: [a0] AGP version 1.0
        Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW- AGP3- Rate=x1,x2
        Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>
    Kernel driver in use: agpgart-intel

00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP
bridge (rev 03) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR+ FastB2B- DisINTx-
    Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    I/O behind bridge: 0000d000-0000dfff
    Memory behind bridge: b6800000-b7dfffff
    Prefetchable memory behind bridge: b8000000-cfffffff
    Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B+
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Kernel modules: shpchp

00:04.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
    Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0

00:04.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev
01) (prog-if 80 [Master])
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32
    Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
    Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
    Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
    Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
    Region 4: I/O ports at b800 [size=16]
    Kernel driver in use: ata_piix
    Kernel modules: pata_acpi

00:04.2 USB controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev
01) (prog-if 00 [UHCI])
    Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32
    Interrupt: pin D routed to IRQ 4
    Region 4: I/O ports at b400 [size=32]
    Kernel driver in use: uhci_hcd

00:04.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
    Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Interrupt: pin ? routed to IRQ 9
    Kernel modules: i2c_piix4

00:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8169
PCI Gigabit Ethernet Controller (rev 10)
    Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI
Gigabit Ethernet NIC
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 4
    Region 0: I/O ports at b000 [size=256]
    Region 1: Memory at b6000000 (32-bit, non-prefetchable) [size=256]
    [virtual] Expansion ROM at 40000000 [disabled] [size=128K]
    Capabilities: [dc] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: r8169
    Kernel modules: r8169

00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8100/8101L/8139 PCI Fast Ethernet Adapter (rev 10)
    Subsystem: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI
Fast Ethernet Adapter
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (8000ns min, 16000ns max)
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at a800 [size=256]
    Region 1: Memory at b5800000 (32-bit, non-prefetchable) [size=256]
    [virtual] Expansion ROM at 40020000 [disabled] [size=64K]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0-,D1+,D2+,D3hot+,D3cold+)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: 8139too
    Kernel modules: 8139cp, 8139too

00:0b.0 PCI bridge: Pericom Semiconductor PI7C9X111SL PCIe-to-PCI
Reversible Bridge (rev 02) (prog-if 00 [Normal decode])
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 11
    Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
    I/O behind bridge: 0000f000-00000fff
    Memory behind bridge: b5000000-b57fffff
    Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff
    Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- <SERR- <PERR-
    BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
        PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
    Capabilities: [80] PCI-X bridge device
        Secondary Status: 64bit- 133MHz- SCD- USC- SCO- SRD- Freq=conv
        Status: Dev=ff:1f.0 64bit- 133MHz- SCD- USC- SCO- SRD-
        Upstream: Capacity=16 CommitmentLimit=16
        Downstream: Capacity=16 CommitmentLimit=16
    Capabilities: [a8] Subsystem: Device 0000:0000
    Capabilities: [b0] Express (v1) PCI/PCI-X to PCI-Express Bridge, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0
            ExtTag+ RBE-
        DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd- ExtTag+ PhantFunc- AuxPwr- NoSnoop-
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend+
        LnkCap:    Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <512ns, L1 <1us
            ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
    Capabilities: [d8] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Input/output error
        Not readable
    Capabilities: [f0] MSI: Enable- Count=1/1 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Kernel modules: shpchp

00:0e.0 Mass storage controller: Promise Technology, Inc. 20269 (rev
02) (prog-if 85)
    Subsystem: Promise Technology, Inc. Ultra133TX2
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 32 (1000ns min, 4500ns max), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 15
    Region 0: I/O ports at 9800 [size=8]
    Region 1: I/O ports at 9400 [size=4]
    Region 2: I/O ports at 9000 [size=8]
    Region 3: I/O ports at 8800 [size=4]
    Region 4: I/O ports at 8400 [size=16]
    Region 5: Memory at b4800000 (32-bit, non-prefetchable) [size=16K]
    [virtual] Expansion ROM at 40030000 [disabled] [size=16K]
    Capabilities: [60] Power Management version 1
        Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: pata_pdc2027x
    Kernel modules: pata_pdc2027x

01:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
[AMD/ATI] R350 [Radeon 9800 Series] (prog-if 00 [VGA controller])
    Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] R350 [Radeon 9800 Series]
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (2000ns min), Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 10
    Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
    Region 1: I/O ports at d800 [size=256]
    Region 2: Memory at b7000000 (32-bit, non-prefetchable) [size=64K]
    Expansion ROM at 000c0000 [disabled] [size=128K]
    Capabilities: [58] AGP version 2.0
        Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans-
64bit- FW+ AGP3- Rate=x1,x2
        Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP- GART64- 64bit- FW- Rate=<none>
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
    Kernel driver in use: radeon
    Kernel modules: radeonfb, radeon

01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI]
R350 [Radeon 9800 PRO] (Secondary)
    Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] R350 [Radeon
9800 PRO] (Secondary)
    Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping+ SERR- FastB2B- DisINTx-
    Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 64 (2000ns min), Cache Line Size: 32 bytes
    Region 0: Memory at b8000000 (32-bit, prefetchable) [size=128M]
    Region 1: Memory at b6800000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: [50] Power Management version 2
        Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
        Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

02:00.0 USB controller: Renesas Technology Corp. uPD720202 USB 3.0
Host Controller (rev 02) (prog-if 30 [XHCI])
    Subsystem: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller
    Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
ParErr- Stepping- SERR- FastB2B- DisINTx+
    Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
    Latency: 0, Cache Line Size: 32 bytes
    Interrupt: pin A routed to IRQ 11
    Region 0: Memory at b5000000 (64-bit, non-prefetchable) [size=8K]
    Capabilities: [50] Power Management version 3
        Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
        Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
    Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+
        Address: 0000000000000000  Data: 0000
    Capabilities: [90] MSI-X: Enable+ Count=8 Masked-
        Vector table: BAR=0 offset=00001000
        PBA: BAR=0 offset=00001080
    Capabilities: [a0] Express (v2) Endpoint, MSI 00
        DevCap:    MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
            ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
        DevCtl:    Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
            RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
            MaxPayload 128 bytes, MaxReadReq 512 bytes
        DevSta:    CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
        LnkCap:    Port #0, Speed 5GT/s, Width x1, ASPM L0s L1, Exit
Latency L0s <4us, L1 unlimited
            ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp-
        LnkCtl:    ASPM Disabled; RCB 64 bytes Disabled- CommClk-
            ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
        LnkSta:    Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
        DevCap2: Completion Timeout: Not Supported, TimeoutDis+, LTR+,
OBFF Not Supported
        DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-,
OBFF Disabled
        LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-
             Transmit Margin: Normal Operating Range,
EnterModifiedCompliance- ComplianceSOS-
             Compliance De-emphasis: -6dB
        LnkSta2: Current De-emphasis Level: -3.5dB,
EqualizationComplete-, EqualizationPhase1-
             EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
    Kernel driver in use: xhci_hcd

*********************************************************************************************************************

dmesg.4.11.1:

[    0.000000] Linux version 4.11.1-041101-generic (kernel@tangerine)
(gcc version 6.3.0 20170510 (Ubuntu 6.3.0-17ubuntu1) ) #201705140931
SMP Sun May 14 13:50:33 UTC 2017
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Centaur CentaurHauls
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003ffebfff] usable
[    0.000000] BIOS-e820: [mem 0x000000003ffec000-0x000000003ffeefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000003ffef000-0x000000003fffefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000003ffff000-0x000000003fffffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.3 present.
[    0.000000] DMI: System Manufacturer System Name/<P3B-F>, BIOS ASUS
P3B-F ACPI BIOS Revision 1008 Beta 004 10/15/2001
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3ffec max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-AFFFF uncachable
[    0.000000]   B0000-BFFFF write-combining
[    0.000000]   C0000-C7FFF write-protect
[    0.000000]   C8000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask FC0000000 write-back
[    0.000000]   1 base 0C8000000 mask FF8000000 write-combining
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: PAT not supported by CPU.
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] initial memory mapped: [mem 0x00000000-0x0f3fffff]
[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[    0.000000] BRK [0x0eeaf000, 0x0eeaffff] PGTABLE
[    0.000000] BRK [0x0eeb0000, 0x0eeb0fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x330cd000-0x3585dfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F5A60 000014 (v00 ASUS  )
[    0.000000] ACPI: RSDT 0x000000003FFEC000 00002C (v01 ASUS   P3B_F
  30303031 MSFT 31313031)
[    0.000000] ACPI: FACP 0x000000003FFEC080 000074 (v01 ASUS   P3B_F
  30303031 MSFT 31313031)
[    0.000000] ACPI: DSDT 0x000000003FFEC100 00263A (v01 ASUS   P3B_F
  00001000 MSFT 0100000B)
[    0.000000] ACPI: FACS 0x000000003FFFF000 000040
[    0.000000] ACPI: BOOT 0x000000003FFEC040 000028 (v01 ASUS   P3B_F
  30303031 MSFT 31313031)
[    0.000000] 131MB HIGHMEM available.
[    0.000000] 891MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 37bfe000
[    0.000000]   low ram: 0 - 37bfe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000037bfdfff]
[    0.000000]   HighMem  [mem 0x0000000037bfe000-0x000000003ffebfff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000003ffebfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000003ffebfff]
[    0.000000] On node 0 totalpages: 262025
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   Normal zone: 2190 pages used for memmap
[    0.000000]   Normal zone: 224254 pages, LIFO batch:31
[    0.000000]   HighMem zone: 33774 pages, LIFO batch:7
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0xe408
[    0.000000] Local APIC disabled by BIOS -- reenabling.
[    0.000000] Found and enabled local APIC!
[    0.000000] smpboot: Boot CPU (id 0) not listed by BIOS
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x40000000-0xfffeffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff
max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1
nr_node_ids:1
[    0.000000] percpu: Embedded 23 pages/cpu @f71e4000 s63052 r0 d31156 u94208
[    0.000000] pcpu-alloc: s63052 r0 d31156 u94208 alloc=23*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 259795
[    0.000000] Kernel command line:
BOOT_IMAGE=/boot/vmlinuz-4.11.1-041101-generic
root=UUID=ac8baa2d-9112-40e2-ad06-15c78dd2d616 ro quiet splash lapic
radeon.agpmode=-1 vt.handoff=7
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00037bfe:0003ffec)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 981324K/1048100K available (8469K kernel code,
877K rwdata, 3288K rodata, 1012K init, 848K bss, 66776K reserved, 0K
cma-reserved, 135096K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfff15000 - 0xfffff000   ( 936 kB)
                   pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
                   vmalloc : 0xf83fe000 - 0xffbfe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf7bfe000   ( 891 MB)
                     .init : 0xcec5b000 - 0xced58000   (1012 kB)
                     .data : 0xce84560f - 0xcec59780   (4176 kB)
                     .text : 0xce000000 - 0xce84560f   (8469 kB)
[    0.000000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000]     Build-time adjustment of leaf fanout to 32.
[    0.000000]     RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:32 16
[    0.000000] CPU 0 irqstacks, hard=f6c3a000 soft=f6c3c000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 1048576 bytes of page_ext
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.004000] tsc: Detected 1002.206 MHz processor
[    0.004000] Calibrating delay loop (skipped), value calculated
using timer frequency.. 2004.41 BogoMIPS (lpj=4008824)
[    0.004000] pid_max: default: 32768 minimum: 301
[    0.004000] ACPI: Core revision 20170119
[    0.013640] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.013658] ACPI: setting ELCR to 0200 (from 8c10)
[    0.013783] Security Framework initialized
[    0.013793] Yama: becoming mindful.
[    0.013862] AppArmor: AppArmor initialized
[    0.014047] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.014053] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.014953] mce: CPU supports 5 MCE banks
[    0.014996] Last level iTLB entries: 4KB 32, 2MB 0, 4MB 2
[    0.015000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 8, 1GB 0
[    0.032401] Freeing SMP alternatives memory: 32K
[    0.037176] ftrace: allocating 33367 entries in 66 pages
[    0.068237] smpboot: Max logical packages: 1
[    0.068250] smpboot: SMP motherboard not detected
[    0.068252] smpboot: SMP disabled
[    0.068258] Enabling APIC mode:  Flat.  Using 0 I/O APICs
[    0.072000] Performance Events: p6 PMU driver.
[    0.072000] ... version:                0
[    0.072000] ... bit width:              32
[    0.072000] ... generic registers:      2
[    0.072000] ... value mask:             00000000ffffffff
[    0.072000] ... max period:             000000007fffffff
[    0.072000] ... fixed-purpose events:   0
[    0.072000] ... event mask:             0000000000000003
[    0.072000] smp: Bringing up secondary CPUs ...
[    0.072000] smp: Brought up 1 node, 1 CPU
[    0.072000] smpboot: Total of 1 processors activated (2004.41 BogoMIPS)
[    0.072000] sched_clock: Marking stable (68000000, 0)->(77324206, -9324206)
[    0.180282] NMI watchdog: enabled on all CPUs, permanently consumes
one hw-PMU counter.
[    0.180657] devtmpfs: initialized
[    0.181440] evm: security.selinux
[    0.181442] evm: security.SMACK64
[    0.181444] evm: security.SMACK64EXEC
[    0.181446] evm: security.SMACK64TRANSMUTE
[    0.181448] evm: security.SMACK64MMAP
[    0.181449] evm: security.ima
[    0.181451] evm: security.capability
[    0.181847] PM: Registering ACPI NVS region [mem
0x3ffff000-0x3fffffff] (4096 bytes)
[    0.182035] clocksource: jiffies: mask: 0xffffffff max_cycles:
0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.182047] futex hash table entries: 256 (order: 2, 16384 bytes)
[    0.182191] pinctrl core: initialized pinctrl subsystem
[    0.182527] RTC time: 19:31:26, date: 05/21/17
[    0.182945] NET: Registered protocol family 16
[    0.183843] EISA bus registered
[    0.183851] cpuidle: using governor ladder
[    0.183854] cpuidle: using governor menu
[    0.183859] PCCT header not found.
[    0.184214] Simple Boot Flag at 0x3a set to 0x1
[    0.184252] ACPI: bus type PCI registered
[    0.184259] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.188638] PCI: PCI BIOS revision 2.10 entry at 0xf08c0, last bus=2
[    0.188641] PCI: Using configuration type 1 for base access
[    0.194067] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.195103] ACPI: Added _OSI(Module Device)
[    0.195110] ACPI: Added _OSI(Processor Device)
[    0.195114] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.195117] ACPI: Added _OSI(Processor Aggregator Device)
[    0.200040] ACPI: Interpreter enabled
[    0.200179] ACPI: (supports S0 S1 S3 S4 S5)
[    0.200184] ACPI: Using PIC for interrupt routing
[    0.200259] PCI: Using host bridge windows from ACPI; if necessary,
use "pci=nocrs" and report a bug
[    0.214979] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10
11 12 14 15)
[    0.215246] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10
*11 12 14 15)
[    0.215503] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11
12 14 *15)
[    0.215761] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 7 9 10
11 12 14 15)
[    0.216064] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.216082] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.216099] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.216110] acpi PNP0A03:00: fail to add MMCONFIG information,
can't access extended PCI configuration space under this bridge.
[    0.216319] acpi PNP0A03:00: ignoring host bridge window [mem
0x000c8000-0x000dffff window] (conflicts with Video ROM [mem
0x000c0000-0x000ccfff])
[    0.216623] PCI host bridge to bus 0000:00
[    0.216631] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.216636] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.216641] pci_bus 0000:00: root bus resource [mem
0x000a0000-0x000bffff window]
[    0.216646] pci_bus 0000:00: root bus resource [mem
0x40000000-0xffffffff window]
[    0.216653] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.216678] pci 0000:00:00.0: [8086:7190] type 00 class 0x060000
[    0.216700] pci 0000:00:00.0: reg 0x10: [mem 0xd0000000-0xdfffffff pref]
[    0.216943] pci 0000:00:01.0: [8086:7191] type 01 class 0x060400
[    0.217134] pci 0000:00:04.0: [8086:7110] type 00 class 0x060100
[    0.217388] pci 0000:00:04.1: [8086:7111] type 00 class 0x010180
[    0.217441] pci 0000:00:04.1: reg 0x20: [io  0xb800-0xb80f]
[    0.217467] pci 0000:00:04.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.217471] pci 0000:00:04.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.217476] pci 0000:00:04.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.217480] pci 0000:00:04.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.217658] pci 0000:00:04.2: [8086:7112] type 00 class 0x0c0300
[    0.217711] pci 0000:00:04.2: reg 0x20: [io  0xb400-0xb41f]
[    0.217823] pci 0000:00:04.2: System wakeup disabled by ACPI
[    0.217953] pci 0000:00:04.3: [8086:7113] type 00 class 0x068000
[    0.217960] * Found PM-Timer Bug on the chipset. Due to workarounds
for a bug,
               * this clock source is slow. Consider trying other clock sources
[    0.218042] pci 0000:00:04.3: quirk: [io  0xe400-0xe43f] claimed by
PIIX4 ACPI
[    0.218049] pci 0000:00:04.3: quirk: [io  0xe800-0xe80f] claimed by PIIX4 SMB
[    0.218234] pci 0000:00:09.0: [10ec:8169] type 00 class 0x020000
[    0.218255] pci 0000:00:09.0: reg 0x10: [io  0xb000-0xb0ff]
[    0.218268] pci 0000:00:09.0: reg 0x14: [mem 0xb6000000-0xb60000ff]
[    0.218312] pci 0000:00:09.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
[    0.218352] pci 0000:00:09.0: supports D1 D2
[    0.218357] pci 0000:00:09.0: PME# supported from D1 D2 D3hot D3cold
[    0.218516] pci 0000:00:0a.0: [10ec:8139] type 00 class 0x020000
[    0.218537] pci 0000:00:0a.0: reg 0x10: [io  0xa800-0xa8ff]
[    0.218551] pci 0000:00:0a.0: reg 0x14: [mem 0xb5800000-0xb58000ff]
[    0.218594] pci 0000:00:0a.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.218633] pci 0000:00:0a.0: supports D1 D2
[    0.218638] pci 0000:00:0a.0: PME# supported from D1 D2 D3hot D3cold
[    0.218794] pci 0000:00:0b.0: [12d8:e111] type 01 class 0x060400
[    0.219044] pci 0000:00:0e.0: [105a:4d69] type 00 class 0x018085
[    0.219065] pci 0000:00:0e.0: reg 0x10: [io  0x9800-0x9807]
[    0.219078] pci 0000:00:0e.0: reg 0x14: [io  0x9400-0x9403]
[    0.219091] pci 0000:00:0e.0: reg 0x18: [io  0x9000-0x9007]
[    0.219104] pci 0000:00:0e.0: reg 0x1c: [io  0x8800-0x8803]
[    0.219116] pci 0000:00:0e.0: reg 0x20: [io  0x8400-0x840f]
[    0.219130] pci 0000:00:0e.0: reg 0x24: [mem 0xb4800000-0xb4803fff]
[    0.219143] pci 0000:00:0e.0: reg 0x30: [mem 0x00000000-0x00003fff pref]
[    0.219183] pci 0000:00:0e.0: supports D1
[    0.219414] pci 0000:01:00.0: [1002:4e48] type 00 class 0x030000
[    0.219436] pci 0000:01:00.0: reg 0x10: [mem 0xc8000000-0xcfffffff pref]
[    0.219448] pci 0000:01:00.0: reg 0x14: [io  0xd800-0xd8ff]
[    0.219460] pci 0000:01:00.0: reg 0x18: [mem 0xb7000000-0xb700ffff]
[    0.219493] pci 0000:01:00.0: reg 0x30: [mem 0xc7fe0000-0xc7ffffff pref]
[    0.219537] pci 0000:01:00.0: supports D1 D2
[    0.219654] pci 0000:01:00.1: [1002:4e68] type 00 class 0x038000
[    0.219674] pci 0000:01:00.1: reg 0x10: [mem 0xb8000000-0xbfffffff pref]
[    0.219686] pci 0000:01:00.1: reg 0x14: [mem 0xb6800000-0xb680ffff]
[    0.219757] pci 0000:01:00.1: supports D1 D2
[    0.219887] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.219894] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.219901] pci 0000:00:01.0:   bridge window [mem 0xb6800000-0xb7dfffff]
[    0.219908] pci 0000:00:01.0:   bridge window [mem
0xb8000000-0xcfffffff pref]
[    0.220088] pci 0000:02:00.0: [1912:0015] type 00 class 0x0c0330
[    0.220135] pci 0000:02:00.0: reg 0x10: [mem 0xb5000000-0xb5001fff 64bit]
[    0.220373] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    1.228146] pci 0000:00:0b.0: ASPM: Could not configure common clock
[    1.228199] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.228212] pci 0000:00:0b.0:   bridge window [mem 0xb5000000-0xb57fffff]
[    1.228236] pci_bus 0000:00: on NUMA node 0
[    1.232000] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[    1.232009] pci 0000:01:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[    1.232018] pci 0000:01:00.0: vgaarb: bridge control possible
[    1.232020] vgaarb: loaded
[    1.232823] SCSI subsystem initialized
[    1.233018] libata version 3.00 loaded.
[    1.233104] ACPI: bus type USB registered
[    1.233178] usbcore: registered new interface driver usbfs
[    1.233211] usbcore: registered new interface driver hub
[    1.233255] usbcore: registered new device driver usb
[    1.233666] PCI: Using ACPI for IRQ routing
[    1.233676] PCI: pci_cache_line_size set to 32 bytes
[    1.233760] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    1.233766] e820: reserve RAM buffer [mem 0x3ffec000-0x3fffffff]
[    1.234146] NetLabel: Initializing
[    1.234150] NetLabel:  domain hash size = 128
[    1.234152] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.234216] NetLabel:  unlabeled traffic allowed by default
[    1.234875] clocksource: Switched to clocksource refined-jiffies
[    1.298841] VFS: Disk quotas dquot_6.6.0
[    1.298946] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.299331] AppArmor: AppArmor Filesystem Enabled
[    1.299581] pnp: PnP ACPI init
[    1.300232] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    1.300241] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    1.300247] system 00:00: [mem 0x00100000-0x3fffffff] could not be reserved
[    1.300255] system 00:00: [mem 0xfffe0000-0xffffffff] could not be reserved
[    1.300272] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.300859] system 00:01: [io  0x03f0-0x03f1] has been reserved
[    1.300865] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    1.300876] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.301058] system 00:02: [io  0xe400-0xe43f] has been reserved
[    1.301064] system 00:02: [io  0xe800-0xe80f] has been reserved
[    1.301074] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.301315] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.302042] pnp 00:04: [dma 2]
[    1.302146] pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.304137] pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.304988] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.305024] pnp: PnP ACPI: found 7 devices
[    1.305033] PnPBIOS: Disabled
[    1.345780] clocksource: acpi_pm: mask: 0xffffff max_cycles:
0xffffff, max_idle_ns: 2085701024 ns
[    1.345824] clocksource: Switched to clocksource acpi_pm
[    1.345916] pci 0000:00:09.0: BAR 6: assigned [mem
0x40000000-0x4001ffff pref]
[    1.345927] pci 0000:00:0a.0: BAR 6: assigned [mem
0x40020000-0x4002ffff pref]
[    1.345936] pci 0000:00:0e.0: BAR 6: assigned [mem
0x40030000-0x40033fff pref]
[    1.345949] pci 0000:00:01.0: PCI bridge to [bus 01]
[    1.345956] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    1.345964] pci 0000:00:01.0:   bridge window [mem 0xb6800000-0xb7dfffff]
[    1.345971] pci 0000:00:01.0:   bridge window [mem
0xb8000000-0xcfffffff pref]
[    1.345984] pci 0000:00:0b.0: PCI bridge to [bus 02]
[    1.345993] pci 0000:00:0b.0:   bridge window [mem 0xb5000000-0xb57fffff]
[    1.346008] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.346013] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.346018] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.346023] pci_bus 0000:00: resource 7 [mem 0x40000000-0xffffffff window]
[    1.346029] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    1.346034] pci_bus 0000:01: resource 1 [mem 0xb6800000-0xb7dfffff]
[    1.346039] pci_bus 0000:01: resource 2 [mem 0xb8000000-0xcfffffff pref]
[    1.346044] pci_bus 0000:02: resource 1 [mem 0xb5000000-0xb57fffff]
[    1.346293] NET: Registered protocol family 2
[    1.347023] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    1.347128] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    1.347317] TCP: Hash tables configured (established 8192 bind 8192)
[    1.347587] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    1.347649] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    1.347946] NET: Registered protocol family 1
[    1.348004] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.349182] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 4
[    1.349187] PCI: setting IRQ 4 as level-triggered
[    1.349586] pci 0000:01:00.0: Video device with shadowed ROM at
[mem 0x000c0000-0x000dffff]
[    1.350684] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    1.350688] PCI: setting IRQ 11 as level-triggered
[    1.351390] PCI: CLS 32 bytes, default 32
[    1.351651] Unpacking initramfs...
[    4.282610] Freeing initrd memory: 40516K
[    4.283342] Scanning for low memory corruption every 60 seconds
[    4.284530] audit: initializing netlink subsys (disabled)
[    4.285669] Initialise system trusted keyrings
[    4.285806] audit: type=2000 audit(1495395089.171:1):
state=initialized audit_enabled=0 res=1
[    4.285861] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[    4.291402] zbud: loaded
[    4.292953] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.293767] fuse init (API version 7.26)
[    4.298778] Key type asymmetric registered
[    4.298786] Asymmetric key parser 'x509' registered
[    4.298839] bounce: pool size: 64 pages
[    4.298906] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 248)
[    4.299049] io scheduler noop registered
[    4.299052] io scheduler deadline registered
[    4.299297] io scheduler cfq registered (default)
[    4.299902] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[    4.299905] vesafb: scrolling: redraw
[    4.299911] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
[    4.299968] vesafb: framebuffer at 0xc8000000, mapped to
0xf8600000, using 3072k, total 3072k
[    4.313015] Console: switching to colour frame buffer device 128x48
[    4.325464] fb0: VESA VGA frame buffer device
[    4.325573] intel_idle: does not run on family 6 model 8
[    4.325795] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    4.325808] ACPI: Power Button [PWRB]
[    4.325968] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    4.325974] ACPI: Power Button [PWRF]
[    4.326309] sched_clock: Marking unstable (4216019263,
109999313)<-(4335342782, -9324206)
[    4.326322] tsc: Marking TSC unstable due to TSC halts in idle
[    4.326879] GHES: HEST is not enabled!
[    4.326995] isapnp: Scanning for PnP cards...
[    4.436768] pnp 01:01.00: increased option port range from
0x388-0x388 to 0x388-0x3f8
[    4.436774] pnp 01:01.00: increased option port range from
0x388-0x388 to 0x388-0x3f8
[    4.436781] pnp 01:01.00: increased option port range from
0x388-0x388 to 0x388-0x3f8
[    4.436918]  01:01: card 'Creative ViBRA16C PnP'
[    4.436922] isapnp: 1 Plug & Play card detected total
[    4.437305] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    4.442496] Linux agpgart interface v0.103
[    4.442741] agpgart-intel 0000:00:00.0: Intel 440BX Chipset
[    4.458128] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    4.466991] loop: module loaded
[    4.467492] ata_piix 0000:00:04.1: version 2.13
[    4.469690] scsi host0: ata_piix
[    4.470128] scsi host1: ata_piix
[    4.470278] ata1: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xb800 irq 14
[    4.470282] ata2: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xb808 irq 15
[    4.470612] libphy: Fixed MDIO Bus: probed
[    4.470616] tun: Universal TUN/TAP device driver, 1.6
[    4.471055] PPP generic driver version 2.4.2
[    4.471238] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.471253] ehci-pci: EHCI PCI platform driver
[    4.471312] ehci-platform: EHCI generic platform driver
[    4.471341] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    4.471350] ohci-pci: OHCI PCI platform driver
[    4.471382] ohci-platform: OHCI generic platform driver
[    4.471406] uhci_hcd: USB Universal Host Controller Interface driver
[    4.471933] uhci_hcd 0000:00:04.2: UHCI Host Controller
[    4.471959] uhci_hcd 0000:00:04.2: new USB bus registered, assigned
bus number 1
[    4.471977] uhci_hcd 0000:00:04.2: detected 2 ports
[    4.472019] uhci_hcd 0000:00:04.2: irq 4, io base 0x0000b400
[    4.472270] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    4.472276] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.472280] usb usb1: Product: UHCI Host Controller
[    4.472285] usb usb1: Manufacturer: Linux 4.11.1-041101-generic uhci_hcd
[    4.472289] usb usb1: SerialNumber: 0000:00:04.2
[    4.472732] hub 1-0:1.0: USB hub found
[    4.472760] hub 1-0:1.0: 2 ports detected
[    4.473645] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    4.473677] xhci_hcd 0000:02:00.0: new USB bus registered, assigned
bus number 2
[    4.479070] ata2: port disabled--ignoring
[    4.479272] xhci_hcd 0000:02:00.0: hcc params 0x014051cf hci
version 0x100 quirks 0x00000090
[    4.479685] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    4.479691] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.479695] usb usb2: Product: xHCI Host Controller
[    4.479700] usb usb2: Manufacturer: Linux 4.11.1-041101-generic xhci-hcd
[    4.479704] usb usb2: SerialNumber: 0000:02:00.0
[    4.480162] hub 2-0:1.0: USB hub found
[    4.480193] hub 2-0:1.0: 2 ports detected
[    4.480548] xhci_hcd 0000:02:00.0: xHCI Host Controller
[    4.480563] xhci_hcd 0000:02:00.0: new USB bus registered, assigned
bus number 3
[    4.482580] usb usb3: We don't know the algorithms for LPM for this
host, disabling LPM.
[    4.482680] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    4.482686] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[    4.482690] usb usb3: Product: xHCI Host Controller
[    4.482695] usb usb3: Manufacturer: Linux 4.11.1-041101-generic xhci-hcd
[    4.482699] usb usb3: SerialNumber: 0000:02:00.0
[    4.483096] hub 3-0:1.0: USB hub found
[    4.483126] hub 3-0:1.0: 2 ports detected
[    4.483653] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M]
at 0x60,0x64 irq 1,12
[    4.487167] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.487187] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.487661] mousedev: PS/2 mouse device common for all mice
[    4.488103] rtc_cmos 00:03: RTC can wake from S4
[    4.488303] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.488336] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram
[    4.488373] i2c /dev entries driver
[    4.488583] device-mapper: uevent: version 1.0.3
[    4.488827] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23)
initialised: dm-devel@xxxxxxxxxx
[    4.488920] platform eisa.0: Probing EISA bus 0
[    4.488929] platform eisa.0: EISA: Cannot allocate resource for mainboard
[    4.488936] platform eisa.0: Cannot allocate resource for EISA slot 1
[    4.488941] platform eisa.0: Cannot allocate resource for EISA slot 2
[    4.488946] platform eisa.0: Cannot allocate resource for EISA slot 3
[    4.488951] platform eisa.0: Cannot allocate resource for EISA slot 4
[    4.488956] platform eisa.0: Cannot allocate resource for EISA slot 5
[    4.488961] platform eisa.0: Cannot allocate resource for EISA slot 6
[    4.488966] platform eisa.0: Cannot allocate resource for EISA slot 7
[    4.488971] platform eisa.0: Cannot allocate resource for EISA slot 8
[    4.488975] platform eisa.0: EISA: Detected 0 cards
[    4.488994] cpufreq_nforce2: No nForce2 chipset
[    4.489034] ledtrig-cpu: registered to indicate activity on CPUs
[    4.489827] NET: Registered protocol family 10
[    4.510274] Segment Routing with IPv6
[    4.510349] NET: Registered protocol family 17
[    4.510391] Key type dns_resolver registered
[    4.511163] microcode: sig=0x686, pf=0x1, revision=0x7
[    4.511292] microcode: Microcode Update Driver: v2.2.
[    4.511306] Using IPI No-Shortcut mode
[    4.511834] registered taskstats version 1
[    4.511875] Loading compiled-in X.509 certificates
[    4.513009] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[    4.532679] Loaded X.509 cert 'Build time autogenerated kernel key:
1c47d9d199e0a9b1614fe1f5b15f1861bc7b9e81'
[    4.532768] zswap: loaded using pool lzo/zbud
[    4.588033] Key type big_key registered
[    4.588050] Key type trusted registered
[    4.597106] Key type encrypted registered
[    4.597120] AppArmor: AppArmor sha1 policy hashing enabled
[    4.597130] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[    4.597221] evm: HMAC attrs: 0x1
[    4.597707]   Magic number: 1:67:547
[    4.597768] tty ttyS23: hash matches
[    4.597935] rtc_cmos 00:03: setting system clock to 2017-05-21
19:31:30 UTC (1495395090)
[    4.598410] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    4.598415] EDD information not available.
[    4.598510] PM: Hibernation image not present or could not be loaded.
[    4.630565] ata1.00: ATAPI: HL-DT-ST RW/DVD GCC-4521B, 1.07, max UDMA/33
[    4.635234] ata1.00: configured for UDMA/33
[    4.636477] scsi 0:0:0:0: CD-ROM            HL-DT-ST RW/DVD
GCC-4521B 1.07 PQ: 0 ANSI: 5
[    4.658899] sr 0:0:0:0: [sr0] scsi3-mmc drive: 52x/52x writer cd/rw
xa/form2 cdda tray
[    4.658907] cdrom: Uniform CD-ROM driver Revision: 3.20
[    4.659488] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    4.659762] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    4.664574] Freeing unused kernel memory: 1012K
[    4.664841] Write protecting the kernel text: 8472k
[    4.665106] Write protecting the kernel read-only data: 3296k
[    4.728967] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.729379] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.729442] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    4.736326] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.737121] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.740539] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.740883] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.742734] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.743094] random: udevadm: uninitialized urandom read (16 bytes read)
[    4.743393] random: udevadm: uninitialized urandom read (16 bytes read)
[    5.101192] Floppy drive(s): fd0 is 1.44M
[    5.122138] FDC 0 is a post-1991 82077
[    5.196955] pata_pdc2027x 0000:00:0e.0: version 1.0
[    5.223632] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 15
[    5.223640] PCI: setting IRQ 15 as level-triggered
[    5.322933] pata_pdc2027x 0000:00:0e.0: PLL input clock 16690 kHz
[    5.352746] clocksource: tsc: mask: 0xffffffffffffffff max_cycles:
0xe723b03c31, max_idle_ns: 440795232511 ns
[    5.926189] scsi host2: pata_pdc2027x
[    5.945397] scsi host3: pata_pdc2027x
[    5.945685] ata3: PATA max UDMA/133 mmio m16384@0xb4800000 cmd
0xb48017c0 irq 15
[    5.945691] ata4: PATA max UDMA/133 mmio m16384@0xb4800000 cmd
0xb48015c0 irq 15
[    5.946635] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    5.946648] 8139cp 0000:00:0a.0: This (id 10ec:8139 rev 10) is not
an 8139C+ compatible chip, use 8139too
[    5.950861] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    5.951353] r8169 0000:00:09.0 (unnamed net_device)
(uninitialized): not PCI Express
[    5.952075] r8169 0000:00:09.0 eth0: RTL8169sb/8110sb at
0xf8467000, 48:02:2a:07:34:3e, XID 10000000 IRQ 4
[    5.952082] r8169 0000:00:09.0 eth0: jumbo features [frames: 7152
bytes, tx checksumming: ok]
[    5.957088] r8169 0000:00:09.0 enp0s9: renamed from eth0
[    5.989500] 8139too: 8139too Fast Ethernet driver 0.9.28
[    5.991750] 8139too 0000:00:0a.0 eth0: RealTek RTL8139 at
0x0001a800, 00:50:fc:ab:a9:72, IRQ 15
[    5.995639] 8139too 0000:00:0a.0 enp0s10: renamed from eth0
[    5.997663] [drm] radeon kernel modesetting enabled.
[    5.997843] checking generic (c8000000 300000) vs hw (c8000000 8000000)
[    5.997847] fb: switching to radeondrmfb from VESA VGA
[    5.997945] Console: switching to colour dummy device 80x25
[    6.007476] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[    6.007484] PCI: setting IRQ 10 as level-triggered
[    6.009332] [drm] initializing kernel modesetting (R350
0x1002:0x4E48 0x1002:0x0002 0x00).
[    6.009343] [drm] Forcing AGP to PCI mode
[    6.009372] [drm] register mmio base: 0xB7000000
[    6.009375] [drm] register mmio size: 65536
[    6.010758] [drm] Generation 1 PCI interface in multifunction mode
[    6.010761] [drm] Limiting VRAM to one aperture
[    6.010779] radeon 0000:01:00.0: VRAM: 128M 0x00000000C8000000 -
0x00000000CFFFFFFF (128M used)
[    6.010786] radeon 0000:01:00.0: GTT: 512M 0x00000000A8000000 -
0x00000000C7FFFFFF
[    6.010898] [drm] Detected VRAM RAM=128M, BAR=128M
[    6.010901] [drm] RAM width 256bits DDR
[    6.011340] [TTM] Zone  kernel: Available graphics memory: 443894 kiB
[    6.011343] [TTM] Zone highmem: Available graphics memory: 511442 kiB
[    6.011346] [TTM] Initializing pool allocator
[    6.011361] [TTM] Initializing DMA pool allocator
[    6.011457] [drm] radeon: 128M of VRAM memory ready
[    6.011461] [drm] radeon: 512M of GTT memory ready.
[    6.011518] [drm] GART: num cpu pages 131072, num gpu pages 131072
[    6.024304] [drm] radeon: 2 quad pipes, 1 Z pipes initialized.
[    6.024319] [drm] PCI GART of 512M enabled (table at 0x0000000035800000).
[    6.024448] radeon 0000:01:00.0: WB enabled
[    6.024462] radeon 0000:01:00.0: fence driver on ring 0 use gpu
addr 0x00000000a8000000 and cpu addr 0xf53ca000
[    6.024468] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.024470] [drm] Driver supports precise vblank timestamp query.
[    6.024508] [drm] radeon: irq initialized.
[    6.024532] [drm] Loading R300 Microcode
[    6.025124] [drm] radeon: ring at 0x00000000A8001000
[    6.025167] [drm] ring test succeeded in 1 usecs
[    6.025606] [drm] ib test succeeded in 0 usecs
[    6.028778] [drm] No TV DAC info found in BIOS
[    6.030316] [drm] Radeon Display Connectors
[    6.030323] [drm] Connector 0:
[    6.030325] [drm]   VGA-1
[    6.030330] [drm]   DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[    6.030332] [drm]   Encoders:
[    6.030334] [drm]     CRT1: INTERNAL_DAC1
[    6.030337] [drm] Connector 1:
[    6.030338] [drm]   DVI-I-1
[    6.030340] [drm]   HPD1
[    6.030344] [drm]   DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[    6.030346] [drm]   Encoders:
[    6.030348] [drm]     CRT2: INTERNAL_DAC2
[    6.030349] [drm]     DFP1: INTERNAL_TMDS1
[    6.030351] [drm] Connector 2:
[    6.030353] [drm]   SVIDEO-1
[    6.030354] [drm]   Encoders:
[    6.030356] [drm]     TV1: INTERNAL_DAC2
[    6.105156] [drm] fb mappable at 0xC8040000
[    6.105161] [drm] vram apper at 0xC8000000
[    6.105163] [drm] size 8294400
[    6.105165] [drm] fb depth is 24
[    6.105167] [drm]    pitch is 7680
[    6.105954] fbcon: radeondrmfb (fb0) is primary device
[    6.164556] Console: switching to colour frame buffer device 240x67
[    6.197633] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    6.198272] [drm] Initialized radeon 2.49.0 20080528 for
0000:01:00.0 on minor 0
[    6.198413] ata3.00: ATA-6: ST3120022A, 3.76, max UDMA/100
[    6.198418] ata3.00: 234441648 sectors, multi 16: LBA48
[    6.222637] ata3.00: configured for UDMA/100
[    6.223201] scsi 2:0:0:0: Direct-Access     ATA      ST3120022A
  3.76 PQ: 0 ANSI: 5
[    6.224164] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks:
(120 GB/112 GiB)
[    6.224214] sd 2:0:0:0: [sda] Write Protect is off
[    6.224220] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.224297] sd 2:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    6.225611] sd 2:0:0:0: Attached scsi generic sg1 type 0
[    6.248601]  sda: sda1 sda2 sda3 sda4
[    6.249954] sd 2:0:0:0: [sda] Attached SCSI disk
[    6.670833] random: fast init done
[    7.027653] input: ImPS/2 Logitech Wheel Mouse as
/devices/platform/i8042/serio1/input/input4
[    7.690813] EXT4-fs (sda3): mounted filesystem with ordered data
mode. Opts: (null)
[    9.093108] ip_tables: (C) 2000-2006 Netfilter Core Team
[    9.184528] systemd[1]: systemd 232 running in system mode. (+PAM
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP
+GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    9.185019] systemd[1]: Detected architecture x86.
[    9.192375] systemd[1]: Set hostname to <karka-System-Name>.
[   10.214084] random: crng init done
[   10.875834] systemd[1]: Listening on Journal Socket.
[   10.876481] systemd[1]: Listening on Syslog Socket.
[   10.876734] systemd[1]: Started Forward Password Requests to Wall
Directory Watch.
[   10.877474] systemd[1]: Created slice System Slice.
[   10.880629] systemd[1]: Starting Nameserver information manager...
[   10.881175] systemd[1]: Listening on Journal Socket (/dev/log).
[   10.882664] systemd[1]: Created slice User and Session Slice.
[   11.582287] lp: driver loaded but no devices found
[   11.713869] ppdev: user-space parallel port driver
[   20.682722] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[   20.866926] systemd-journald[220]: Received request to flush
runtime journal from PID 1
[   22.780192] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   22.863370] ACPI Warning: SystemIO range
0x000000000000E800-0x000000000000E808 conflicts with OpRegion
0x000000000000E800-0x000000000000E806 (\SM00) (20170119/utaddress-247)
[   22.863394] ACPI: If an ACPI driver is available for this device,
you should use it instead of the native driver
[   26.470586] Adding 1465340k swap on /dev/sda2.  Priority:-1
extents:1 across:1465340k FS
[   27.286347] EXT4-fs (sda4): mounted filesystem with ordered data
mode. Opts: (null)
[   27.863104] audit: type=1400 audit(1495395113.763:2):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/lightdm/lightdm-guest-session" pid=553
comm="apparmor_parser"
[   27.863116] audit: type=1400 audit(1495395113.763:3):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=553
comm="apparmor_parser"
[   27.879490] audit: type=1400 audit(1495395113.779:4):
apparmor="STATUS" operation="profile_load" name="/sbin/dhclient"
pid=554 comm="apparmor_parser"
[   27.879502] audit: type=1400 audit(1495395113.779:5):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=554
comm="apparmor_parser"
[   27.879506] audit: type=1400 audit(1495395113.779:6):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=554
comm="apparmor_parser"
[   27.879510] audit: type=1400 audit(1495395113.779:7):
apparmor="STATUS" operation="profile_load"
name="/usr/lib/connman/scripts/dhclient-script" pid=554
comm="apparmor_parser"
[   27.956905] audit: type=1400 audit(1495395113.855:8):
apparmor="STATUS" operation="profile_load" name="/usr/bin/evince"
pid=555 comm="apparmor_parser"
[   27.956918] audit: type=1400 audit(1495395113.855:9):
apparmor="STATUS" operation="profile_load"
name="/usr/bin/evince//sanitized_helper" pid=555
comm="apparmor_parser"
[   27.956922] audit: type=1400 audit(1495395113.855:10):
apparmor="STATUS" operation="profile_load"
name="/usr/bin/evince-previewer" pid=555 comm="apparmor_parser"
[   27.956926] audit: type=1400 audit(1495395113.855:11):
apparmor="STATUS" operation="profile_load"
name="/usr/bin/evince-previewer//sanitized_helper" pid=555
comm="apparmor_parser"
[   30.771759] systemd[1]: apt-daily.timer: Adding 7h 22min 30.629961s
random time.
[   31.914677] systemd[1]: apt-daily.timer: Adding 7h 15min 43.797462s
random time.
[   33.119439] IPv6: ADDRCONF(NETDEV_UP): enp0s9: link is not ready
[   33.130730] r8169 0000:00:09.0 enp0s9: link down
[   33.131290] IPv6: ADDRCONF(NETDEV_UP): enp0s9: link is not ready
[   33.231770] IPv6: ADDRCONF(NETDEV_UP): enp0s10: link is not ready
[   33.232094] 8139too 0000:00:0a.0 enp0s10: link up, 100Mbps,
full-duplex, lpa 0x45E1
[   46.693337] systemd[1]: apt-daily.timer: Adding 10h 16min
29.732068s random time.
[   59.041245] systemd[1]: apt-daily.timer: Adding 9h 5min 3.620305s
random time.


**********************************************************************************************************






2017-05-17 8:50 GMT+02:00 Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>:
>
> Hi,
>
> "Xavier ." <xmontell@xxxxxxxxx> writes:
>> Hello.
>> I have one problem with chip Renesas uPD720202 (card Startech PCIUSB3S22).
>> In Windows XP run fine, very fine, but in GNU/Linux kernel does not
>> receive any USB3.0 plug/unplug events, why?
>> No usb device is recognized, it is as if the card had nothing connected.
>>
>> I have tried the following GNU/Linux:
>>
>> Ubuntu 17.04-desktop-i386
>> Lubuntu 17.04-i386
>> Debian-live-8.8.0-i386-lxde-desktop
>> Centos-7-i386-LiveGnome-1611
>> Fedora-LXDE-Live-i386-25-1.3
>> OpenSUSE-13.2-DVD-i5860054
>> In no case kernel does not receive any USB plug/unplug events
>>
>> The card firmware is the latest (2026) and is well installed.
>> My machine is very old: P3 1Ghz on ASUS P3B-F but run fine
>> Xavier.
>> Thanks
>>
>> ***********************************************************************************************************************************
>>
>> Attached 5 files: dmesg.txt, interrupts.txt, lspci.txt, lx201fw21.txt,
>> dmesg_with_pendrive_connected_at_boot.txt
>>
>> dmesg.txt
>>
>> [    0.000000] Initializing cgroup subsys cpuset
>> [    0.000000] Initializing cgroup subsys cpu
>> [    0.000000] Initializing cgroup subsys cpuacct
>> [    0.000000] Linux version 3.16.0-4-686-pae
>
> this is really, really old kernel. Please try with v4.11 or v4.12-rc1
> and tell us if you see the same problem.
>
> --
> balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux