On 04/18/2017 11:56 AM, Johan Hovold wrote:
> On Mon, Apr 17, 2017 at 01:56:54PM +0200, Marek Vasut wrote:
>> This development kit has an FT4232 on it with a custom USB VID/PID.
>> The FT4232 provides four UARTs, but only two are used. The UART 0
>> is used by the FlashPro5 programmer and UART 2 is connected to the
>> SmartFusion2 CortexM3 SoC UART port.
>
> Thanks for verifying that you do not want to bind to interface 0.
>
> Judging from the above description, it seems we can do even even better
> and only bind to interface 2 using
>
> USB_DEVICE_INTERFACE_NUMBER()
>
> since you only have one uart connected that you want to expose, right?
Yes
>> Note that the USB VID is registered to Actel according to Linux USB
>> VID database, but that was acquired by Microsemi.
>>
>> Signed-off-by: Marek Vasut <marex@xxxxxxx>
>> Cc: stable <stable@xxxxxxxxxxxxxxx>
>> Cc: usb <linux-usb@xxxxxxxxxxxxxxx>
>> Cc: Johan Hovold <johan@xxxxxxxxxx>
>> ---
>> V2: - Move the ID in ftdi_sio_ids.h to keep it sorted by VIDs
>> - Use the JTAG quirk to avoid binding channel 0, this is needed by
>> the Libero software, otherwise it cannot use the programmer.
>> ---
>> drivers/usb/serial/ftdi_sio.c | 2 ++
>> drivers/usb/serial/ftdi_sio_ids.h | 10 ++++++++++
>> 2 files changed, 12 insertions(+)
>>
>> diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
>> index 80c6d3deb80d..a42e7f2af420 100644
>> --- a/drivers/usb/serial/ftdi_sio.c
>> +++ b/drivers/usb/serial/ftdi_sio.c
>> @@ -873,6 +873,8 @@ static const struct usb_device_id id_table_combined[] = {
>> { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID,
>> USB_CLASS_VENDOR_SPEC,
>> USB_SUBCLASS_VENDOR_SPEC, 0x00) },
>> + { USB_DEVICE(ACTEL_VID, MICROSEMI_ARROW_SF2PLUS_BOARD_PID),
>> + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
>> { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
>> { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
>> .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
>> diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
>> index 168ccb03ce08..7b6edb8e9ee2 100644
>> --- a/drivers/usb/serial/ftdi_sio_ids.h
>> +++ b/drivers/usb/serial/ftdi_sio_ids.h
>> @@ -877,6 +877,16 @@
>> #define FIC_VID 0x1457
>> #define FIC_NEO1973_DEBUG_PID 0x5118
>>
>> +/*
>> + * Microsemi/Arrow SF2PLUS Dev Kit
>> + *
>> + * This board has an FT4232 on it which provides four UART ports.
>> + * UART 0 is used by the FlashPro5 programmer, UART 2 is connected
>> + * to the UART of an CortexM3 SoC-FPGA on the board.
>
> You can remove this comment (having it in the git history should be
> sufficient), and just make this a "Microsemi (formerly Actel)" header.
OK
>> + */
>> +#define ACTEL_VID 0x1514
>> +#define MICROSEMI_ARROW_SF2PLUS_BOARD_PID 0x2008
>> +
>> /* Olimex */
>> #define OLIMEX_VID 0x15BA
>> #define OLIMEX_ARM_USB_OCD_PID 0x0003
>
> Thanks,
> Johan
>
--
Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
