Adding vendor specific directories in phy to group phy drivers under their respective vendor umbrella. Also updated the MAINTAINERS file to reflect the correct directory structure for phy drivers. Signed-off-by: Vivek Gautam <vivek.gautam@xxxxxxxxxxxxxx> Acked-by: Heiko Stuebner <heiko@xxxxxxxxx> Acked-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx> Acked-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx> Acked-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> Reviewed-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> Cc: Kishon Vijay Abraham I <kishon@xxxxxx> Cc: David S. Miller <davem@xxxxxxxxxxxxx> Cc: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Cc: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> Cc: Guenter Roeck <linux@xxxxxxxxxxxx> Cc: Heiko Stuebner <heiko@xxxxxxxxx> Cc: Viresh Kumar <viresh.kumar@xxxxxxxxxx> Cc: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> Cc: Chen-Yu Tsai <wens@xxxxxxxx> Cc: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx> Cc: Krzysztof Kozlowski <krzk@xxxxxxxxxx> Cc: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> Cc: Stephen Boyd <stephen.boyd@xxxxxxxxxx> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: linux-arm-msm@xxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx Cc: linux-omap@xxxxxxxxxxxxxxx Cc: linux-renesas-soc@xxxxxxxxxxxxxxx Cc: linux-rockchip@xxxxxxxxxxxxxxxxxxx Cc: linux-samsung-soc@xxxxxxxxxxxxxxx Cc: linux-usb@xxxxxxxxxxxxxxx --- Changes since v3: - Added 'Acked-by' and 'Reviewed by' tags received for this patch. - No functional change. Changes since v2: - Rebased on linux-phy/next. - Took care of drivers added/removed for each vendors since v2. - Updated the 'Signed-off-by' tag with my current email id. Changes from v1: - Updated the MAINTAINERS file to reflect the same change in directory structure. - Removed PHY_PLAT config as pointed out by Kishon. So we don't require the second patch in the v1 of this series: [PATCH 2/2] arm: mach-spear: Enable PHY_PLAT to meet dependency - Renamed sunxi --> allwinner; rcar --> renesas. - Fixed error coming with qcom Makefile. * Build tested multi_v7_defconfig. * Build tested arm64 defconfig with all the involved configs enabled. MAINTAINERS | 18 +- drivers/phy/Kconfig | 471 +-------------------- drivers/phy/Makefile | 67 +-- drivers/phy/allwinner/Kconfig | 31 ++ drivers/phy/allwinner/Makefile | 2 + drivers/phy/{ => allwinner}/phy-sun4i-usb.c | 0 drivers/phy/{ => allwinner}/phy-sun9i-usb.c | 0 drivers/phy/broadcom/Kconfig | 64 +++ drivers/phy/broadcom/Makefile | 7 + drivers/phy/{ => broadcom}/phy-bcm-cygnus-pcie.c | 0 drivers/phy/{ => broadcom}/phy-bcm-kona-usb2.c | 0 drivers/phy/{ => broadcom}/phy-bcm-ns-usb2.c | 0 drivers/phy/{ => broadcom}/phy-bcm-ns-usb3.c | 0 drivers/phy/{ => broadcom}/phy-bcm-ns2-pcie.c | 0 drivers/phy/{ => broadcom}/phy-bcm-nsp-usb3.c | 0 drivers/phy/{ => broadcom}/phy-brcm-sata.c | 0 drivers/phy/hisilicon/Kconfig | 20 + drivers/phy/hisilicon/Makefile | 2 + drivers/phy/{ => hisilicon}/phy-hi6220-usb.c | 0 drivers/phy/{ => hisilicon}/phy-hix5hd2-sata.c | 0 drivers/phy/marvell/Kconfig | 50 +++ drivers/phy/marvell/Makefile | 6 + drivers/phy/{ => marvell}/phy-armada375-usb2.c | 0 drivers/phy/{ => marvell}/phy-berlin-sata.c | 0 drivers/phy/{ => marvell}/phy-berlin-usb.c | 0 drivers/phy/{ => marvell}/phy-mvebu-sata.c | 0 drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c | 0 drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c | 0 drivers/phy/qualcomm/Kconfig | 38 ++ drivers/phy/qualcomm/Makefile | 7 + drivers/phy/{ => qualcomm}/phy-qcom-apq8064-sata.c | 0 drivers/phy/{ => qualcomm}/phy-qcom-ipq806x-sata.c | 0 drivers/phy/{ => qualcomm}/phy-qcom-ufs-i.h | 0 drivers/phy/{ => qualcomm}/phy-qcom-ufs-qmp-14nm.c | 0 drivers/phy/{ => qualcomm}/phy-qcom-ufs-qmp-14nm.h | 0 drivers/phy/{ => qualcomm}/phy-qcom-ufs-qmp-20nm.c | 0 drivers/phy/{ => qualcomm}/phy-qcom-ufs-qmp-20nm.h | 0 drivers/phy/{ => qualcomm}/phy-qcom-ufs.c | 0 drivers/phy/{ => qualcomm}/phy-qcom-usb-hs.c | 0 drivers/phy/{ => qualcomm}/phy-qcom-usb-hsic.c | 0 drivers/phy/renesas/Kconfig | 17 + drivers/phy/renesas/Makefile | 2 + drivers/phy/{ => renesas}/phy-rcar-gen2.c | 0 drivers/phy/{ => renesas}/phy-rcar-gen3-usb2.c | 0 drivers/phy/rockchip/Kconfig | 51 +++ drivers/phy/rockchip/Makefile | 6 + drivers/phy/{ => rockchip}/phy-rockchip-dp.c | 0 drivers/phy/{ => rockchip}/phy-rockchip-emmc.c | 0 .../phy/{ => rockchip}/phy-rockchip-inno-usb2.c | 0 drivers/phy/{ => rockchip}/phy-rockchip-pcie.c | 0 drivers/phy/{ => rockchip}/phy-rockchip-typec.c | 0 drivers/phy/{ => rockchip}/phy-rockchip-usb.c | 0 drivers/phy/samsung/Kconfig | 96 +++++ drivers/phy/samsung/Makefile | 11 + drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0 drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0 drivers/phy/{ => samsung}/phy-exynos-pcie.c | 0 drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0 drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0 drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0 drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0 drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0 drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0 drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0 drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0 drivers/phy/st/Kconfig | 33 ++ drivers/phy/st/Makefile | 4 + drivers/phy/{ => st}/phy-miphy28lp.c | 0 drivers/phy/{ => st}/phy-spear1310-miphy.c | 0 drivers/phy/{ => st}/phy-spear1340-miphy.c | 0 drivers/phy/{ => st}/phy-stih407-usb.c | 0 drivers/phy/ti/Kconfig | 78 ++++ drivers/phy/ti/Makefile | 7 + drivers/phy/{ => ti}/phy-da8xx-usb.c | 0 drivers/phy/{ => ti}/phy-dm816x-usb.c | 0 drivers/phy/{ => ti}/phy-omap-control.c | 0 drivers/phy/{ => ti}/phy-omap-usb2.c | 0 drivers/phy/{ => ti}/phy-ti-pipe3.c | 0 drivers/phy/{ => ti}/phy-tusb1210.c | 0 drivers/phy/{ => ti}/phy-twl4030-usb.c | 0 80 files changed, 567 insertions(+), 521 deletions(-) create mode 100644 drivers/phy/allwinner/Kconfig create mode 100644 drivers/phy/allwinner/Makefile rename drivers/phy/{ => allwinner}/phy-sun4i-usb.c (100%) rename drivers/phy/{ => allwinner}/phy-sun9i-usb.c (100%) create mode 100644 drivers/phy/broadcom/Kconfig create mode 100644 drivers/phy/broadcom/Makefile rename drivers/phy/{ => broadcom}/phy-bcm-cygnus-pcie.c (100%) rename drivers/phy/{ => broadcom}/phy-bcm-kona-usb2.c (100%) rename drivers/phy/{ => broadcom}/phy-bcm-ns-usb2.c (100%) rename drivers/phy/{ => broadcom}/phy-bcm-ns-usb3.c (100%) rename drivers/phy/{ => broadcom}/phy-bcm-ns2-pcie.c (100%) rename drivers/phy/{ => broadcom}/phy-bcm-nsp-usb3.c (100%) rename drivers/phy/{ => broadcom}/phy-brcm-sata.c (100%) create mode 100644 drivers/phy/hisilicon/Kconfig create mode 100644 drivers/phy/hisilicon/Makefile rename drivers/phy/{ => hisilicon}/phy-hi6220-usb.c (100%) rename drivers/phy/{ => hisilicon}/phy-hix5hd2-sata.c (100%) create mode 100644 drivers/phy/marvell/Kconfig create mode 100644 drivers/phy/marvell/Makefile rename drivers/phy/{ => marvell}/phy-armada375-usb2.c (100%) rename drivers/phy/{ => marvell}/phy-berlin-sata.c (100%) rename drivers/phy/{ => marvell}/phy-berlin-usb.c (100%) rename drivers/phy/{ => marvell}/phy-mvebu-sata.c (100%) rename drivers/phy/{ => marvell}/phy-pxa-28nm-hsic.c (100%) rename drivers/phy/{ => marvell}/phy-pxa-28nm-usb2.c (100%) create mode 100644 drivers/phy/qualcomm/Kconfig create mode 100644 drivers/phy/qualcomm/Makefile rename drivers/phy/{ => qualcomm}/phy-qcom-apq8064-sata.c (100%) rename drivers/phy/{ => qualcomm}/phy-qcom-ipq806x-sata.c (100%) rename drivers/phy/{ => qualcomm}/phy-qcom-ufs-i.h (100%) rename drivers/phy/{ => qualcomm}/phy-qcom-ufs-qmp-14nm.c (100%) rename drivers/phy/{ => qualcomm}/phy-qcom-ufs-qmp-14nm.h (100%) rename drivers/phy/{ => qualcomm}/phy-qcom-ufs-qmp-20nm.c (100%) rename drivers/phy/{ => qualcomm}/phy-qcom-ufs-qmp-20nm.h (100%) rename drivers/phy/{ => qualcomm}/phy-qcom-ufs.c (100%) rename drivers/phy/{ => qualcomm}/phy-qcom-usb-hs.c (100%) rename drivers/phy/{ => qualcomm}/phy-qcom-usb-hsic.c (100%) create mode 100644 drivers/phy/renesas/Kconfig create mode 100644 drivers/phy/renesas/Makefile rename drivers/phy/{ => renesas}/phy-rcar-gen2.c (100%) rename drivers/phy/{ => renesas}/phy-rcar-gen3-usb2.c (100%) create mode 100644 drivers/phy/rockchip/Kconfig create mode 100644 drivers/phy/rockchip/Makefile rename drivers/phy/{ => rockchip}/phy-rockchip-dp.c (100%) rename drivers/phy/{ => rockchip}/phy-rockchip-emmc.c (100%) rename drivers/phy/{ => rockchip}/phy-rockchip-inno-usb2.c (100%) rename drivers/phy/{ => rockchip}/phy-rockchip-pcie.c (100%) rename drivers/phy/{ => rockchip}/phy-rockchip-typec.c (100%) rename drivers/phy/{ => rockchip}/phy-rockchip-usb.c (100%) create mode 100644 drivers/phy/samsung/Kconfig create mode 100644 drivers/phy/samsung/Makefile rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%) rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%) rename drivers/phy/{ => samsung}/phy-exynos-pcie.c (100%) rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%) rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%) rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%) rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%) rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%) rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%) rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%) rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%) create mode 100644 drivers/phy/st/Kconfig create mode 100644 drivers/phy/st/Makefile rename drivers/phy/{ => st}/phy-miphy28lp.c (100%) rename drivers/phy/{ => st}/phy-spear1310-miphy.c (100%) rename drivers/phy/{ => st}/phy-spear1340-miphy.c (100%) rename drivers/phy/{ => st}/phy-stih407-usb.c (100%) create mode 100644 drivers/phy/ti/Kconfig create mode 100644 drivers/phy/ti/Makefile rename drivers/phy/{ => ti}/phy-da8xx-usb.c (100%) rename drivers/phy/{ => ti}/phy-dm816x-usb.c (100%) rename drivers/phy/{ => ti}/phy-omap-control.c (100%) rename drivers/phy/{ => ti}/phy-omap-usb2.c (100%) rename drivers/phy/{ => ti}/phy-ti-pipe3.c (100%) rename drivers/phy/{ => ti}/phy-tusb1210.c (100%) rename drivers/phy/{ => ti}/phy-twl4030-usb.c (100%) diff --git a/MAINTAINERS b/MAINTAINERS index c265a5fe4848..aede35d9be8f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1814,8 +1814,8 @@ F: drivers/i2c/busses/i2c-st.c F: drivers/media/rc/st_rc.c F: drivers/media/platform/sti/c8sectpfe/ F: drivers/mmc/host/sdhci-st.c -F: drivers/phy/phy-miphy28lp.c -F: drivers/phy/phy-stih407-usb.c +F: drivers/phy/st/phy-miphy28lp.c +F: drivers/phy/st/phy-stih407-usb.c F: drivers/pinctrl/pinctrl-st.c F: drivers/remoteproc/st_remoteproc.c F: drivers/remoteproc/st_slim_rproc.c @@ -10638,7 +10638,7 @@ RENESAS USB2 PHY DRIVER M: Yoshihiro Shimoda <yoshihiro.shimoda.uh@xxxxxxxxxxx> L: linux-renesas-soc@xxxxxxxxxxxxxxx S: Maintained -F: drivers/phy/phy-rcar-gen3-usb2.c +F: drivers/phy/renesas/phy-rcar-gen3-usb2.c RESET CONTROLLER FRAMEWORK M: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx> @@ -11012,12 +11012,12 @@ L: linux-kernel@xxxxxxxxxxxxxxx S: Supported F: Documentation/devicetree/bindings/phy/samsung-phy.txt F: Documentation/phy/samsung-usb2.txt -F: drivers/phy/phy-exynos4210-usb2.c -F: drivers/phy/phy-exynos4x12-usb2.c -F: drivers/phy/phy-exynos5250-usb2.c -F: drivers/phy/phy-s5pv210-usb2.c -F: drivers/phy/phy-samsung-usb2.c -F: drivers/phy/phy-samsung-usb2.h +F: drivers/phy/samsung/phy-exynos4210-usb2.c +F: drivers/phy/samsung/phy-exynos4x12-usb2.c +F: drivers/phy/samsung/phy-exynos5250-usb2.c +F: drivers/phy/samsung/phy-s5pv210-usb2.c +F: drivers/phy/samsung/phy-samsung-usb2.c +F: drivers/phy/samsung/phy-samsung-usb2.h SERIAL DRIVERS M: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index dc5277ad1b5a..e337c3fb39a7 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -15,73 +15,6 @@ config GENERIC_PHY phy users can obtain reference to the PHY. All the users of this framework should select this config. -config PHY_BCM_NS_USB2 - tristate "Broadcom Northstar USB 2.0 PHY Driver" - depends on ARCH_BCM_IPROC || COMPILE_TEST - depends on HAS_IOMEM && OF - select GENERIC_PHY - help - Enable this to support Broadcom USB 2.0 PHY connected to the USB - controller on Northstar family. - -config PHY_BCM_NS_USB3 - tristate "Broadcom Northstar USB 3.0 PHY Driver" - depends on ARCH_BCM_IPROC || COMPILE_TEST - depends on HAS_IOMEM && OF - select GENERIC_PHY - help - Enable this to support Broadcom USB 3.0 PHY connected to the USB - controller on Northstar family. - -config PHY_BERLIN_USB - tristate "Marvell Berlin USB PHY Driver" - depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF - select GENERIC_PHY - help - Enable this to support the USB PHY on Marvell Berlin SoCs. - -config PHY_BERLIN_SATA - tristate "Marvell Berlin SATA PHY driver" - depends on ARCH_BERLIN && HAS_IOMEM && OF - select GENERIC_PHY - help - Enable this to support the SATA PHY on Marvell Berlin SoCs. - -config ARMADA375_USBCLUSTER_PHY - def_bool y - depends on MACH_ARMADA_375 || COMPILE_TEST - depends on OF && HAS_IOMEM - select GENERIC_PHY - -config PHY_DA8XX_USB - tristate "TI DA8xx USB PHY Driver" - depends on ARCH_DAVINCI_DA8XX - select GENERIC_PHY - select MFD_SYSCON - help - Enable this to support the USB PHY on DA8xx SoCs. - - This driver controls both the USB 1.1 PHY and the USB 2.0 PHY. - -config PHY_DM816X_USB - tristate "TI dm816x USB PHY driver" - depends on ARCH_OMAP2PLUS - depends on USB_SUPPORT - select GENERIC_PHY - select USB_PHY - help - Enable this for dm816x USB to work. - -config PHY_EXYNOS_MIPI_VIDEO - tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" - depends on HAS_IOMEM - depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST - select GENERIC_PHY - default y if ARCH_S5PV210 || ARCH_EXYNOS - help - Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P - and EXYNOS SoCs. - config PHY_LPC18XX_USB_OTG tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver" depends on OF && (ARCH_LPC18XX || COMPILE_TEST) @@ -93,146 +26,6 @@ config PHY_LPC18XX_USB_OTG This driver is need for USB0 support on LPC18xx/43xx and takes care of enabling and clock setup. -config PHY_PXA_28NM_HSIC - tristate "Marvell USB HSIC 28nm PHY Driver" - depends on HAS_IOMEM - select GENERIC_PHY - help - Enable this to support Marvell USB HSIC PHY driver for Marvell - SoC. This driver will do the PHY initialization and shutdown. - The PHY driver will be used by Marvell ehci driver. - - To compile this driver as a module, choose M here. - -config PHY_PXA_28NM_USB2 - tristate "Marvell USB 2.0 28nm PHY Driver" - depends on HAS_IOMEM - select GENERIC_PHY - help - Enable this to support Marvell USB 2.0 PHY driver for Marvell - SoC. This driver will do the PHY initialization and shutdown. - The PHY driver will be used by Marvell udc/ehci/otg driver. - - To compile this driver as a module, choose M here. - -config PHY_MVEBU_SATA - def_bool y - depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD - depends on OF - select GENERIC_PHY - -config PHY_MIPHY28LP - tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" - depends on ARCH_STI - select GENERIC_PHY - help - Enable this to support the miphy transceiver (for SATA/PCIE/USB3) - that is part of STMicroelectronics STiH407 SoC. - -config PHY_RCAR_GEN2 - tristate "Renesas R-Car generation 2 USB PHY driver" - depends on ARCH_RENESAS - depends on GENERIC_PHY - help - Support for USB PHY found on Renesas R-Car generation 2 SoCs. - -config PHY_RCAR_GEN3_USB2 - tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" - depends on ARCH_RENESAS - depends on EXTCON - select GENERIC_PHY - help - Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. - -config OMAP_CONTROL_PHY - tristate "OMAP CONTROL PHY Driver" - depends on ARCH_OMAP2PLUS || COMPILE_TEST - help - Enable this to add support for the PHY part present in the control - module. This driver has API to power on the USB2 PHY and to write to - the mailbox. The mailbox is present only in omap4 and the register to - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an - additional register to power on USB3 PHY/SATA PHY/PCIE PHY - (PIPE3 PHY). - -config OMAP_USB2 - tristate "OMAP USB2 PHY Driver" - depends on ARCH_OMAP2PLUS - depends on USB_SUPPORT - select GENERIC_PHY - select USB_PHY - select OMAP_CONTROL_PHY - depends on OMAP_OCP2SCP - help - Enable this to support the transceiver that is part of SOC. This - driver takes care of all the PHY functionality apart from comparator. - The USB OTG controller communicates with the comparator using this - driver. - -config TI_PIPE3 - tristate "TI PIPE3 PHY Driver" - depends on ARCH_OMAP2PLUS || COMPILE_TEST - select GENERIC_PHY - select OMAP_CONTROL_PHY - depends on OMAP_OCP2SCP - help - Enable this to support the PIPE3 PHY that is part of TI SOCs. This - driver takes care of all the PHY functionality apart from comparator. - This driver interacts with the "OMAP Control PHY Driver" to power - on/off the PHY. - -config TWL4030_USB - tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS - depends on USB_SUPPORT - depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y' - select GENERIC_PHY - select USB_PHY - help - Enable this to support the USB OTG transceiver on TWL4030 - family chips (including the TWL5030 and TPS659x0 devices). - This transceiver supports high and full speed devices plus, - in host mode, low speed. - -config PHY_EXYNOS_DP_VIDEO - tristate "EXYNOS SoC series Display Port PHY driver" - depends on OF - depends on ARCH_EXYNOS || COMPILE_TEST - default ARCH_EXYNOS - select GENERIC_PHY - help - Support for Display Port PHY found on Samsung EXYNOS SoCs. - -config BCM_KONA_USB2_PHY - tristate "Broadcom Kona USB2 PHY Driver" - depends on HAS_IOMEM - select GENERIC_PHY - help - Enable this to support the Broadcom Kona USB 2.0 PHY. - -config PHY_EXYNOS5250_SATA - tristate "Exynos5250 Sata SerDes/PHY driver" - depends on SOC_EXYNOS5250 - depends on HAS_IOMEM - depends on OF - select GENERIC_PHY - select I2C - select I2C_S3C2410 - select MFD_SYSCON - help - Enable this to support SATA SerDes/Phy found on Samsung's - Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, - SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host - port to accept one SATA device. - -config PHY_HIX5HD2_SATA - tristate "HIX5HD2 SATA PHY Driver" - depends on ARCH_HIX5HD2 && OF && HAS_IOMEM - select GENERIC_PHY - select MFD_SYSCON - help - Support for SATA PHY on Hisilicon hix5hd2 Soc. - config PHY_MT65XX_USB3 tristate "Mediatek USB3.0 PHY Driver" depends on ARCH_MEDIATEK && OF @@ -241,104 +34,6 @@ config PHY_MT65XX_USB3 Say 'Y' here to add support for Mediatek USB3.0 PHY driver, it supports multiple usb2.0 and usb3.0 ports. -config PHY_HI6220_USB - tristate "hi6220 USB PHY support" - depends on (ARCH_HISI && ARM64) || COMPILE_TEST - select GENERIC_PHY - select MFD_SYSCON - help - Enable this to support the HISILICON HI6220 USB PHY. - - To compile this driver as a module, choose M here. - -config PHY_SUN4I_USB - tristate "Allwinner sunxi SoC USB PHY driver" - depends on ARCH_SUNXI && HAS_IOMEM && OF - depends on RESET_CONTROLLER - depends on EXTCON - depends on POWER_SUPPLY - depends on USB_SUPPORT - select GENERIC_PHY - select USB_COMMON - help - Enable this to support the transceiver that is part of Allwinner - sunxi SoCs. - - This driver controls the entire USB PHY block, both the USB OTG - parts, as well as the 2 regular USB 2 host PHYs. - -config PHY_SUN9I_USB - tristate "Allwinner sun9i SoC USB PHY driver" - depends on ARCH_SUNXI && HAS_IOMEM && OF - depends on RESET_CONTROLLER - depends on USB_SUPPORT - select USB_COMMON - select GENERIC_PHY - help - Enable this to support the transceiver that is part of Allwinner - sun9i SoCs. - - This driver controls each individual USB 2 host PHY. - -config PHY_SAMSUNG_USB2 - tristate "Samsung USB 2.0 PHY driver" - depends on HAS_IOMEM - depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 - select GENERIC_PHY - select MFD_SYSCON - default ARCH_EXYNOS - help - Enable this to support the Samsung USB 2.0 PHY driver for Samsung - SoCs. This driver provides the interface for USB 2.0 PHY. Support - for particular PHYs will be enabled based on the SoC type in addition - to this driver. - -config PHY_S5PV210_USB2 - bool "Support for S5PV210" - depends on PHY_SAMSUNG_USB2 - depends on ARCH_S5PV210 - help - Enable USB PHY support for S5PV210. This option requires that Samsung - USB 2.0 PHY driver is enabled and means that support for this - particular SoC is compiled in the driver. In case of S5PV210 two phys - are available - device and host. - -config PHY_EXYNOS4210_USB2 - bool - depends on PHY_SAMSUNG_USB2 - default CPU_EXYNOS4210 - -config PHY_EXYNOS4X12_USB2 - bool - depends on PHY_SAMSUNG_USB2 - default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 - -config PHY_EXYNOS5250_USB2 - bool - depends on PHY_SAMSUNG_USB2 - default SOC_EXYNOS5250 || SOC_EXYNOS5420 - -config PHY_EXYNOS5_USBDRD - tristate "Exynos5 SoC series USB DRD PHY driver" - depends on ARCH_EXYNOS && OF - depends on HAS_IOMEM - depends on USB_DWC3_EXYNOS - select GENERIC_PHY - select MFD_SYSCON - default y - help - Enable USB DRD PHY support for Exynos 5 SoC series. - This driver provides PHY interface for USB 3.0 DRD controller - present on Exynos5 SoC series. - -config PHY_EXYNOS_PCIE - bool "Exynos PCIe PHY driver" - depends on OF && (ARCH_EXYNOS || COMPILE_TEST) - select GENERIC_PHY - help - Enable PCIe PHY support for Exynos SoC series. - This driver provides PHY interface for Exynos PCIe controller. - config PHY_PISTACHIO_USB tristate "IMG Pistachio USB2.0 PHY driver" depends on MACH_PISTACHIO @@ -346,83 +41,6 @@ config PHY_PISTACHIO_USB help Enable this to support the USB2.0 PHY on the IMG Pistachio SoC. -config PHY_QCOM_APQ8064_SATA - tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" - depends on ARCH_QCOM - depends on HAS_IOMEM - depends on OF - select GENERIC_PHY - -config PHY_QCOM_IPQ806X_SATA - tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" - depends on ARCH_QCOM - depends on HAS_IOMEM - depends on OF - select GENERIC_PHY - -config PHY_ROCKCHIP_USB - tristate "Rockchip USB2 PHY Driver" - depends on ARCH_ROCKCHIP && OF - select GENERIC_PHY - help - Enable this to support the Rockchip USB 2.0 PHY. - -config PHY_ROCKCHIP_INNO_USB2 - tristate "Rockchip INNO USB2PHY Driver" - depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF - depends on COMMON_CLK - depends on EXTCON - depends on USB_SUPPORT - select GENERIC_PHY - select USB_COMMON - help - Support for Rockchip USB2.0 PHY with Innosilicon IP block. - -config PHY_ROCKCHIP_EMMC - tristate "Rockchip EMMC PHY Driver" - depends on ARCH_ROCKCHIP && OF - select GENERIC_PHY - help - Enable this to support the Rockchip EMMC PHY. - -config PHY_ROCKCHIP_DP - tristate "Rockchip Display Port PHY Driver" - depends on ARCH_ROCKCHIP && OF - select GENERIC_PHY - help - Enable this to support the Rockchip Display Port PHY. - -config PHY_ROCKCHIP_PCIE - tristate "Rockchip PCIe PHY Driver" - depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST - select GENERIC_PHY - select MFD_SYSCON - help - Enable this to support the Rockchip PCIe PHY. - -config PHY_ROCKCHIP_TYPEC - tristate "Rockchip TYPEC PHY Driver" - depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) - select EXTCON - select GENERIC_PHY - select RESET_CONTROLLER - help - Enable this to support the Rockchip USB TYPEC PHY. - -config PHY_ST_SPEAR1310_MIPHY - tristate "ST SPEAR1310-MIPHY driver" - select GENERIC_PHY - depends on MACH_SPEAR1310 || COMPILE_TEST - help - Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. - -config PHY_ST_SPEAR1340_MIPHY - tristate "ST SPEAR1340-MIPHY driver" - select GENERIC_PHY - depends on MACH_SPEAR1340 || COMPILE_TEST - help - Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. - config PHY_XGENE tristate "APM X-Gene 15Gbps PHY support" depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) @@ -430,73 +48,6 @@ config PHY_XGENE help This option enables support for APM X-Gene SoC multi-purpose PHY. -config PHY_STIH407_USB - tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" - depends on RESET_CONTROLLER - depends on ARCH_STI || COMPILE_TEST - select GENERIC_PHY - help - Enable this support to enable the picoPHY device used by USB2 - and USB3 controllers on STMicroelectronics STiH407 SoC families. - -config PHY_QCOM_UFS - tristate "Qualcomm UFS PHY driver" - depends on OF && ARCH_QCOM - select GENERIC_PHY - help - Support for UFS PHY on QCOM chipsets. - -config PHY_QCOM_USB_HS - tristate "Qualcomm USB HS PHY module" - depends on USB_ULPI_BUS - select GENERIC_PHY - help - Support for the USB high-speed ULPI compliant phy on Qualcomm - chipsets. - -config PHY_QCOM_USB_HSIC - tristate "Qualcomm USB HSIC ULPI PHY module" - depends on USB_ULPI_BUS - select GENERIC_PHY - help - Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. - -config PHY_TUSB1210 - tristate "TI TUSB1210 ULPI PHY module" - depends on USB_ULPI_BUS - select GENERIC_PHY - help - Support for TI TUSB1210 USB ULPI PHY. - -config PHY_BRCM_SATA - tristate "Broadcom SATA PHY driver" - depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST - depends on OF - select GENERIC_PHY - default ARCH_BCM_IPROC - help - Enable this to support the Broadcom SATA PHY. - If unsure, say N. - -config PHY_CYGNUS_PCIE - tristate "Broadcom Cygnus PCIe PHY driver" - depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) - select GENERIC_PHY - default ARCH_BCM_CYGNUS - help - Enable this to support the Broadcom Cygnus PCIe PHY. - If unsure, say N. - -source "drivers/phy/tegra/Kconfig" - -config PHY_NS2_PCIE - tristate "Broadcom Northstar2 PCIe PHY driver" - depends on OF && MDIO_BUS_MUX_BCM_IPROC - select GENERIC_PHY - default ARCH_BCM_IPROC - help - Enable this to support the Broadcom Northstar2 PCIe PHY. - If unsure, say N. config PHY_MESON8B_USB2 tristate "Meson8b and GXBB USB2 PHY driver" @@ -510,12 +61,18 @@ config PHY_MESON8B_USB2 and GXBB SoCs. If unsure, say N. -config PHY_NSP_USB3 - tristate "Broadcom NorthStar plus USB3 PHY driver" - depends on OF && (ARCH_BCM_NSP || COMPILE_TEST) - select GENERIC_PHY - default ARCH_BCM_NSP - help - Enable this to support the Broadcom Northstar plus USB3 PHY. - If unsure, say N. +menu "Platform Phy drivers" +source "drivers/phy/allwinner/Kconfig" +source "drivers/phy/broadcom/Kconfig" +source "drivers/phy/hisilicon/Kconfig" +source "drivers/phy/marvell/Kconfig" +source "drivers/phy/qualcomm/Kconfig" +source "drivers/phy/renesas/Kconfig" +source "drivers/phy/rockchip/Kconfig" +source "drivers/phy/samsung/Kconfig" +source "drivers/phy/st/Kconfig" +source "drivers/phy/tegra/Kconfig" +source "drivers/phy/ti/Kconfig" +endmenu + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index e7b0feb1e125..fb2e31348dbe 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -3,63 +3,20 @@ # obj-$(CONFIG_GENERIC_PHY) += phy-core.o -obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o -obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o -obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o -obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o -obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o -obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o -obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o -obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o -obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o -obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o -obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o -obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o -obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o -obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o -obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o -obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o -obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o -obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o -obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o -obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o -obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o -obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o -obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o -obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o -obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o -obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o -phy-exynos-usb2-y += phy-samsung-usb2.o -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o -phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o -obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o -obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o -obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o -obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o -obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o -obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o -obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o -obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o -obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o -obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o -obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o -obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o obj-$(CONFIG_PHY_XGENE) += phy-xgene.o -obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o -obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o -obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o -obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o -obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o -obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o -obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o -obj-$(CONFIG_ARCH_TEGRA) += tegra/ -obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o -obj-$(CONFIG_PHY_NSP_USB3) += phy-bcm-nsp-usb3.o +obj-$(CONFIG_ARCH_TEGRA) += tegra/ +obj-$(CONFIG_ARCH_SUNXI) += allwinner/ +obj-$(CONFIG_ARCH_RENESAS) += renesas/ +obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/ + +obj-y += broadcom/ \ + hisilicon/ \ + marvell/ \ + qualcomm/ \ + samsung/ \ + st/ \ + ti/ diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig new file mode 100644 index 000000000000..cdc1e745ba47 --- /dev/null +++ b/drivers/phy/allwinner/Kconfig @@ -0,0 +1,31 @@ +# +# Phy drivers for Allwinner platforms +# +config PHY_SUN4I_USB + tristate "Allwinner sunxi SoC USB PHY driver" + depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on RESET_CONTROLLER + depends on EXTCON + depends on POWER_SUPPLY + depends on USB_SUPPORT + select GENERIC_PHY + select USB_COMMON + help + Enable this to support the transceiver that is part of Allwinner + sunxi SoCs. + + This driver controls the entire USB PHY block, both the USB OTG + parts, as well as the 2 regular USB 2 host PHYs. + +config PHY_SUN9I_USB + tristate "Allwinner sun9i SoC USB PHY driver" + depends on ARCH_SUNXI && HAS_IOMEM && OF + depends on RESET_CONTROLLER + depends on USB_SUPPORT + select USB_COMMON + select GENERIC_PHY + help + Enable this to support the transceiver that is part of Allwinner + sun9i SoCs. + + This driver controls each individual USB 2 host PHY. diff --git a/drivers/phy/allwinner/Makefile b/drivers/phy/allwinner/Makefile new file mode 100644 index 000000000000..8605529c01a1 --- /dev/null +++ b/drivers/phy/allwinner/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o +obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c similarity index 100% rename from drivers/phy/phy-sun4i-usb.c rename to drivers/phy/allwinner/phy-sun4i-usb.c diff --git a/drivers/phy/phy-sun9i-usb.c b/drivers/phy/allwinner/phy-sun9i-usb.c similarity index 100% rename from drivers/phy/phy-sun9i-usb.c rename to drivers/phy/allwinner/phy-sun9i-usb.c diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig new file mode 100644 index 000000000000..4867a0be9f9c --- /dev/null +++ b/drivers/phy/broadcom/Kconfig @@ -0,0 +1,64 @@ +# +# Phy drivers for Broadcom platforms +# +config PHY_CYGNUS_PCIE + tristate "Broadcom Cygnus PCIe PHY driver" + depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST) + select GENERIC_PHY + default ARCH_BCM_CYGNUS + help + Enable this to support the Broadcom Cygnus PCIe PHY. + If unsure, say N. + +config BCM_KONA_USB2_PHY + tristate "Broadcom Kona USB2 PHY Driver" + depends on HAS_IOMEM + select GENERIC_PHY + help + Enable this to support the Broadcom Kona USB 2.0 PHY. + +config PHY_BCM_NS_USB2 + tristate "Broadcom Northstar USB 2.0 PHY Driver" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support Broadcom USB 2.0 PHY connected to the USB + controller on Northstar family. + +config PHY_BCM_NS_USB3 + tristate "Broadcom Northstar USB 3.0 PHY Driver" + depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support Broadcom USB 3.0 PHY connected to the USB + controller on Northstar family. + +config PHY_NS2_PCIE + tristate "Broadcom Northstar2 PCIe PHY driver" + depends on OF && MDIO_BUS_MUX_BCM_IPROC + select GENERIC_PHY + default ARCH_BCM_IPROC + help + Enable this to support the Broadcom Northstar2 PCIe PHY. + If unsure, say N. + +config PHY_NSP_USB3 + tristate "Broadcom NorthStar plus USB3 PHY driver" + depends on OF && (ARCH_BCM_NSP || COMPILE_TEST) + select GENERIC_PHY + default ARCH_BCM_NSP + help + Enable this to support the Broadcom Northstar plus USB3 PHY. + If unsure, say N. + +config PHY_BRCM_SATA + tristate "Broadcom SATA PHY driver" + depends on ARCH_BRCMSTB || ARCH_BCM_IPROC || BMIPS_GENERIC || COMPILE_TEST + depends on OF + select GENERIC_PHY + default ARCH_BCM_IPROC + help + Enable this to support the Broadcom SATA PHY. + If unsure, say N. diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile new file mode 100644 index 000000000000..59ae17bc8596 --- /dev/null +++ b/drivers/phy/broadcom/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o +obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o +obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o +obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o +obj-$(CONFIG_PHY_NS2_PCIE) += phy-bcm-ns2-pcie.o +obj-$(CONFIG_PHY_NSP_USB3) += phy-bcm-nsp-usb3.o +obj-$(CONFIG_PHY_BRCM_SATA) += phy-brcm-sata.o diff --git a/drivers/phy/phy-bcm-cygnus-pcie.c b/drivers/phy/broadcom/phy-bcm-cygnus-pcie.c similarity index 100% rename from drivers/phy/phy-bcm-cygnus-pcie.c rename to drivers/phy/broadcom/phy-bcm-cygnus-pcie.c diff --git a/drivers/phy/phy-bcm-kona-usb2.c b/drivers/phy/broadcom/phy-bcm-kona-usb2.c similarity index 100% rename from drivers/phy/phy-bcm-kona-usb2.c rename to drivers/phy/broadcom/phy-bcm-kona-usb2.c diff --git a/drivers/phy/phy-bcm-ns-usb2.c b/drivers/phy/broadcom/phy-bcm-ns-usb2.c similarity index 100% rename from drivers/phy/phy-bcm-ns-usb2.c rename to drivers/phy/broadcom/phy-bcm-ns-usb2.c diff --git a/drivers/phy/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c similarity index 100% rename from drivers/phy/phy-bcm-ns-usb3.c rename to drivers/phy/broadcom/phy-bcm-ns-usb3.c diff --git a/drivers/phy/phy-bcm-ns2-pcie.c b/drivers/phy/broadcom/phy-bcm-ns2-pcie.c similarity index 100% rename from drivers/phy/phy-bcm-ns2-pcie.c rename to drivers/phy/broadcom/phy-bcm-ns2-pcie.c diff --git a/drivers/phy/phy-bcm-nsp-usb3.c b/drivers/phy/broadcom/phy-bcm-nsp-usb3.c similarity index 100% rename from drivers/phy/phy-bcm-nsp-usb3.c rename to drivers/phy/broadcom/phy-bcm-nsp-usb3.c diff --git a/drivers/phy/phy-brcm-sata.c b/drivers/phy/broadcom/phy-brcm-sata.c similarity index 100% rename from drivers/phy/phy-brcm-sata.c rename to drivers/phy/broadcom/phy-brcm-sata.c diff --git a/drivers/phy/hisilicon/Kconfig b/drivers/phy/hisilicon/Kconfig new file mode 100644 index 000000000000..6164c4cd0f65 --- /dev/null +++ b/drivers/phy/hisilicon/Kconfig @@ -0,0 +1,20 @@ +# +# Phy drivers for Hisilicon platforms +# +config PHY_HI6220_USB + tristate "hi6220 USB PHY support" + depends on (ARCH_HISI && ARM64) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the HISILICON HI6220 USB PHY. + + To compile this driver as a module, choose M here. + +config PHY_HIX5HD2_SATA + tristate "HIX5HD2 SATA PHY Driver" + depends on ARCH_HIX5HD2 && OF && HAS_IOMEM + select GENERIC_PHY + select MFD_SYSCON + help + Support for SATA PHY on Hisilicon hix5hd2 Soc. diff --git a/drivers/phy/hisilicon/Makefile b/drivers/phy/hisilicon/Makefile new file mode 100644 index 000000000000..541b348187a8 --- /dev/null +++ b/drivers/phy/hisilicon/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o +obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o diff --git a/drivers/phy/phy-hi6220-usb.c b/drivers/phy/hisilicon/phy-hi6220-usb.c similarity index 100% rename from drivers/phy/phy-hi6220-usb.c rename to drivers/phy/hisilicon/phy-hi6220-usb.c diff --git a/drivers/phy/phy-hix5hd2-sata.c b/drivers/phy/hisilicon/phy-hix5hd2-sata.c similarity index 100% rename from drivers/phy/phy-hix5hd2-sata.c rename to drivers/phy/hisilicon/phy-hix5hd2-sata.c diff --git a/drivers/phy/marvell/Kconfig b/drivers/phy/marvell/Kconfig new file mode 100644 index 000000000000..048d8893bc2e --- /dev/null +++ b/drivers/phy/marvell/Kconfig @@ -0,0 +1,50 @@ +# +# Phy drivers for Marvell platforms +# +config ARMADA375_USBCLUSTER_PHY + def_bool y + depends on MACH_ARMADA_375 || COMPILE_TEST + depends on OF && HAS_IOMEM + select GENERIC_PHY + +config PHY_BERLIN_SATA + tristate "Marvell Berlin SATA PHY driver" + depends on ARCH_BERLIN && HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support the SATA PHY on Marvell Berlin SoCs. + +config PHY_BERLIN_USB + tristate "Marvell Berlin USB PHY Driver" + depends on ARCH_BERLIN && RESET_CONTROLLER && HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support the USB PHY on Marvell Berlin SoCs. + +config PHY_MVEBU_SATA + def_bool y + depends on ARCH_DOVE || MACH_DOVE || MACH_KIRKWOOD + depends on OF + select GENERIC_PHY + +config PHY_PXA_28NM_HSIC + tristate "Marvell USB HSIC 28nm PHY Driver" + depends on HAS_IOMEM + select GENERIC_PHY + help + Enable this to support Marvell USB HSIC PHY driver for Marvell + SoC. This driver will do the PHY initialization and shutdown. + The PHY driver will be used by Marvell ehci driver. + + To compile this driver as a module, choose M here. + +config PHY_PXA_28NM_USB2 + tristate "Marvell USB 2.0 28nm PHY Driver" + depends on HAS_IOMEM + select GENERIC_PHY + help + Enable this to support Marvell USB 2.0 PHY driver for Marvell + SoC. This driver will do the PHY initialization and shutdown. + The PHY driver will be used by Marvell udc/ehci/otg driver. + + To compile this driver as a module, choose M here. diff --git a/drivers/phy/marvell/Makefile b/drivers/phy/marvell/Makefile new file mode 100644 index 000000000000..3fc188f59118 --- /dev/null +++ b/drivers/phy/marvell/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o +obj-$(CONFIG_PHY_BERLIN_SATA) += phy-berlin-sata.o +obj-$(CONFIG_PHY_BERLIN_USB) += phy-berlin-usb.o +obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o +obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o +obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o diff --git a/drivers/phy/phy-armada375-usb2.c b/drivers/phy/marvell/phy-armada375-usb2.c similarity index 100% rename from drivers/phy/phy-armada375-usb2.c rename to drivers/phy/marvell/phy-armada375-usb2.c diff --git a/drivers/phy/phy-berlin-sata.c b/drivers/phy/marvell/phy-berlin-sata.c similarity index 100% rename from drivers/phy/phy-berlin-sata.c rename to drivers/phy/marvell/phy-berlin-sata.c diff --git a/drivers/phy/phy-berlin-usb.c b/drivers/phy/marvell/phy-berlin-usb.c similarity index 100% rename from drivers/phy/phy-berlin-usb.c rename to drivers/phy/marvell/phy-berlin-usb.c diff --git a/drivers/phy/phy-mvebu-sata.c b/drivers/phy/marvell/phy-mvebu-sata.c similarity index 100% rename from drivers/phy/phy-mvebu-sata.c rename to drivers/phy/marvell/phy-mvebu-sata.c diff --git a/drivers/phy/phy-pxa-28nm-hsic.c b/drivers/phy/marvell/phy-pxa-28nm-hsic.c similarity index 100% rename from drivers/phy/phy-pxa-28nm-hsic.c rename to drivers/phy/marvell/phy-pxa-28nm-hsic.c diff --git a/drivers/phy/phy-pxa-28nm-usb2.c b/drivers/phy/marvell/phy-pxa-28nm-usb2.c similarity index 100% rename from drivers/phy/phy-pxa-28nm-usb2.c rename to drivers/phy/marvell/phy-pxa-28nm-usb2.c diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig new file mode 100644 index 000000000000..458d224f18a5 --- /dev/null +++ b/drivers/phy/qualcomm/Kconfig @@ -0,0 +1,38 @@ +# +# Phy drivers for Qualcomm platforms +# +config PHY_QCOM_APQ8064_SATA + tristate "Qualcomm APQ8064 SATA SerDes/PHY driver" + depends on ARCH_QCOM + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + +config PHY_QCOM_IPQ806X_SATA + tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" + depends on ARCH_QCOM + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + +config PHY_QCOM_UFS + tristate "Qualcomm UFS PHY driver" + depends on OF && ARCH_QCOM + select GENERIC_PHY + help + Support for UFS PHY on QCOM chipsets. + +config PHY_QCOM_USB_HS + tristate "Qualcomm USB HS PHY module" + depends on USB_ULPI_BUS + select GENERIC_PHY + help + Support for the USB high-speed ULPI compliant phy on Qualcomm + chipsets. + +config PHY_QCOM_USB_HSIC + tristate "Qualcomm USB HSIC ULPI PHY module" + depends on USB_ULPI_BUS + select GENERIC_PHY + help + Support for the USB HSIC ULPI compliant PHY on QCOM chipsets. diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile new file mode 100644 index 000000000000..07f7c7896f4d --- /dev/null +++ b/drivers/phy/qualcomm/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o +obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-20nm.o +obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs-qmp-14nm.o +obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o +obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o diff --git a/drivers/phy/phy-qcom-apq8064-sata.c b/drivers/phy/qualcomm/phy-qcom-apq8064-sata.c similarity index 100% rename from drivers/phy/phy-qcom-apq8064-sata.c rename to drivers/phy/qualcomm/phy-qcom-apq8064-sata.c diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c similarity index 100% rename from drivers/phy/phy-qcom-ipq806x-sata.c rename to drivers/phy/qualcomm/phy-qcom-ipq806x-sata.c diff --git a/drivers/phy/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h similarity index 100% rename from drivers/phy/phy-qcom-ufs-i.h rename to drivers/phy/qualcomm/phy-qcom-ufs-i.h diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c similarity index 100% rename from drivers/phy/phy-qcom-ufs-qmp-14nm.c rename to drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c diff --git a/drivers/phy/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h similarity index 100% rename from drivers/phy/phy-qcom-ufs-qmp-14nm.h rename to drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c similarity index 100% rename from drivers/phy/phy-qcom-ufs-qmp-20nm.c rename to drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c diff --git a/drivers/phy/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h similarity index 100% rename from drivers/phy/phy-qcom-ufs-qmp-20nm.h rename to drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h diff --git a/drivers/phy/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c similarity index 100% rename from drivers/phy/phy-qcom-ufs.c rename to drivers/phy/qualcomm/phy-qcom-ufs.c diff --git a/drivers/phy/phy-qcom-usb-hs.c b/drivers/phy/qualcomm/phy-qcom-usb-hs.c similarity index 100% rename from drivers/phy/phy-qcom-usb-hs.c rename to drivers/phy/qualcomm/phy-qcom-usb-hs.c diff --git a/drivers/phy/phy-qcom-usb-hsic.c b/drivers/phy/qualcomm/phy-qcom-usb-hsic.c similarity index 100% rename from drivers/phy/phy-qcom-usb-hsic.c rename to drivers/phy/qualcomm/phy-qcom-usb-hsic.c diff --git a/drivers/phy/renesas/Kconfig b/drivers/phy/renesas/Kconfig new file mode 100644 index 000000000000..432e2715e9c4 --- /dev/null +++ b/drivers/phy/renesas/Kconfig @@ -0,0 +1,17 @@ +# +# Phy drivers for Renesas platforms +# +config PHY_RCAR_GEN2 + tristate "Renesas R-Car generation 2 USB PHY driver" + depends on ARCH_RENESAS + depends on GENERIC_PHY + help + Support for USB PHY found on Renesas R-Car generation 2 SoCs. + +config PHY_RCAR_GEN3_USB2 + tristate "Renesas R-Car generation 3 USB 2.0 PHY driver" + depends on ARCH_RENESAS + depends on EXTCON + select GENERIC_PHY + help + Support for USB 2.0 PHY found on Renesas R-Car generation 3 SoCs. diff --git a/drivers/phy/renesas/Makefile b/drivers/phy/renesas/Makefile new file mode 100644 index 000000000000..695241aebf69 --- /dev/null +++ b/drivers/phy/renesas/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_PHY_RCAR_GEN2) += phy-rcar-gen2.o +obj-$(CONFIG_PHY_RCAR_GEN3_USB2) += phy-rcar-gen3-usb2.o diff --git a/drivers/phy/phy-rcar-gen2.c b/drivers/phy/renesas/phy-rcar-gen2.c similarity index 100% rename from drivers/phy/phy-rcar-gen2.c rename to drivers/phy/renesas/phy-rcar-gen2.c diff --git a/drivers/phy/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c similarity index 100% rename from drivers/phy/phy-rcar-gen3-usb2.c rename to drivers/phy/renesas/phy-rcar-gen3-usb2.c diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig new file mode 100644 index 000000000000..f5325b2b679e --- /dev/null +++ b/drivers/phy/rockchip/Kconfig @@ -0,0 +1,51 @@ +# +# Phy drivers for Rockchip platforms +# +config PHY_ROCKCHIP_DP + tristate "Rockchip Display Port PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip Display Port PHY. + +config PHY_ROCKCHIP_EMMC + tristate "Rockchip EMMC PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip EMMC PHY. + +config PHY_ROCKCHIP_INNO_USB2 + tristate "Rockchip INNO USB2PHY Driver" + depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF + depends on COMMON_CLK + depends on EXTCON + depends on USB_SUPPORT + select GENERIC_PHY + select USB_COMMON + help + Support for Rockchip USB2.0 PHY with Innosilicon IP block. + +config PHY_ROCKCHIP_PCIE + tristate "Rockchip PCIe PHY Driver" + depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the Rockchip PCIe PHY. + +config PHY_ROCKCHIP_TYPEC + tristate "Rockchip TYPEC PHY Driver" + depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST) + select EXTCON + select GENERIC_PHY + select RESET_CONTROLLER + help + Enable this to support the Rockchip USB TYPEC PHY. + +config PHY_ROCKCHIP_USB + tristate "Rockchip USB2 PHY Driver" + depends on ARCH_ROCKCHIP && OF + select GENERIC_PHY + help + Enable this to support the Rockchip USB 2.0 PHY. diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile new file mode 100644 index 000000000000..d867ee5f7527 --- /dev/null +++ b/drivers/phy/rockchip/Makefile @@ -0,0 +1,6 @@ +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o +obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o +obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o +obj-$(CONFIG_PHY_ROCKCHIP_PCIE) += phy-rockchip-pcie.o +obj-$(CONFIG_PHY_ROCKCHIP_TYPEC) += phy-rockchip-typec.o +obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/rockchip/phy-rockchip-dp.c similarity index 100% rename from drivers/phy/phy-rockchip-dp.c rename to drivers/phy/rockchip/phy-rockchip-dp.c diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c similarity index 100% rename from drivers/phy/phy-rockchip-emmc.c rename to drivers/phy/rockchip/phy-rockchip-emmc.c diff --git a/drivers/phy/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c similarity index 100% rename from drivers/phy/phy-rockchip-inno-usb2.c rename to drivers/phy/rockchip/phy-rockchip-inno-usb2.c diff --git a/drivers/phy/phy-rockchip-pcie.c b/drivers/phy/rockchip/phy-rockchip-pcie.c similarity index 100% rename from drivers/phy/phy-rockchip-pcie.c rename to drivers/phy/rockchip/phy-rockchip-pcie.c diff --git a/drivers/phy/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c similarity index 100% rename from drivers/phy/phy-rockchip-typec.c rename to drivers/phy/rockchip/phy-rockchip-typec.c diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/rockchip/phy-rockchip-usb.c similarity index 100% rename from drivers/phy/phy-rockchip-usb.c rename to drivers/phy/rockchip/phy-rockchip-usb.c diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig new file mode 100644 index 000000000000..ed576cc53312 --- /dev/null +++ b/drivers/phy/samsung/Kconfig @@ -0,0 +1,96 @@ +# +# Phy drivers for Samsung platforms +# +config PHY_EXYNOS_DP_VIDEO + tristate "EXYNOS SoC series Display Port PHY driver" + depends on OF + depends on ARCH_EXYNOS || COMPILE_TEST + default ARCH_EXYNOS + select GENERIC_PHY + help + Support for Display Port PHY found on Samsung EXYNOS SoCs. + +config PHY_EXYNOS_MIPI_VIDEO + tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" + depends on HAS_IOMEM + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST + select GENERIC_PHY + default y if ARCH_S5PV210 || ARCH_EXYNOS + help + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P + and EXYNOS SoCs. + +config PHY_EXYNOS_PCIE + bool "Exynos PCIe PHY driver" + depends on OF && (ARCH_EXYNOS || COMPILE_TEST) + select GENERIC_PHY + help + Enable PCIe PHY support for Exynos SoC series. + This driver provides PHY interface for Exynos PCIe controller. + +config PHY_SAMSUNG_USB2 + tristate "Samsung USB 2.0 PHY driver" + depends on HAS_IOMEM + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2 + select GENERIC_PHY + select MFD_SYSCON + default ARCH_EXYNOS + help + Enable this to support the Samsung USB 2.0 PHY driver for Samsung + SoCs. This driver provides the interface for USB 2.0 PHY. Support + for particular PHYs will be enabled based on the SoC type in addition + to this driver. + +config PHY_EXYNOS4210_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default CPU_EXYNOS4210 + +config PHY_EXYNOS4X12_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412 + +config PHY_EXYNOS5250_USB2 + bool + depends on PHY_SAMSUNG_USB2 + default SOC_EXYNOS5250 || SOC_EXYNOS5420 + +config PHY_S5PV210_USB2 + bool "Support for S5PV210" + depends on PHY_SAMSUNG_USB2 + depends on ARCH_S5PV210 + help + Enable USB PHY support for S5PV210. This option requires that Samsung + USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of S5PV210 two phys + are available - device and host. + +config PHY_EXYNOS5250_SATA + tristate "Exynos5250 Sata SerDes/PHY driver" + depends on SOC_EXYNOS5250 + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + select I2C + select I2C_S3C2410 + select MFD_SYSCON + help + Enable this to support SATA SerDes/Phy found on Samsung's + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host + port to accept one SATA device. + + +config PHY_EXYNOS5_USBDRD + tristate "Exynos5 SoC series USB DRD PHY driver" + depends on ARCH_EXYNOS && OF + depends on HAS_IOMEM + depends on USB_DWC3_EXYNOS + select GENERIC_PHY + select MFD_SYSCON + default y + help + Enable USB DRD PHY support for Exynos 5 SoC series. + This driver provides PHY interface for USB 3.0 DRD controller + present on Exynos5 SoC series. diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile new file mode 100644 index 000000000000..499b1a433ab7 --- /dev/null +++ b/drivers/phy/samsung/Makefile @@ -0,0 +1,11 @@ +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o +obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o +phy-exynos-usb2-y += phy-samsung-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o +phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o +obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o +obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c similarity index 100% rename from drivers/phy/phy-exynos-dp-video.c rename to drivers/phy/samsung/phy-exynos-dp-video.c diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c similarity index 100% rename from drivers/phy/phy-exynos-mipi-video.c rename to drivers/phy/samsung/phy-exynos-mipi-video.c diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c similarity index 100% rename from drivers/phy/phy-exynos-pcie.c rename to drivers/phy/samsung/phy-exynos-pcie.c diff --git a/drivers/phy/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c similarity index 100% rename from drivers/phy/phy-exynos4210-usb2.c rename to drivers/phy/samsung/phy-exynos4210-usb2.c diff --git a/drivers/phy/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c similarity index 100% rename from drivers/phy/phy-exynos4x12-usb2.c rename to drivers/phy/samsung/phy-exynos4x12-usb2.c diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c similarity index 100% rename from drivers/phy/phy-exynos5-usbdrd.c rename to drivers/phy/samsung/phy-exynos5-usbdrd.c diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c similarity index 100% rename from drivers/phy/phy-exynos5250-sata.c rename to drivers/phy/samsung/phy-exynos5250-sata.c diff --git a/drivers/phy/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c similarity index 100% rename from drivers/phy/phy-exynos5250-usb2.c rename to drivers/phy/samsung/phy-exynos5250-usb2.c diff --git a/drivers/phy/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c similarity index 100% rename from drivers/phy/phy-s5pv210-usb2.c rename to drivers/phy/samsung/phy-s5pv210-usb2.c diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c similarity index 100% rename from drivers/phy/phy-samsung-usb2.c rename to drivers/phy/samsung/phy-samsung-usb2.c diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h similarity index 100% rename from drivers/phy/phy-samsung-usb2.h rename to drivers/phy/samsung/phy-samsung-usb2.h diff --git a/drivers/phy/st/Kconfig b/drivers/phy/st/Kconfig new file mode 100644 index 000000000000..0814d3f87ec6 --- /dev/null +++ b/drivers/phy/st/Kconfig @@ -0,0 +1,33 @@ +# +# Phy drivers for STMicro platforms +# +config PHY_MIPHY28LP + tristate "STMicroelectronics MIPHY28LP PHY driver for STiH407" + depends on ARCH_STI + select GENERIC_PHY + help + Enable this to support the miphy transceiver (for SATA/PCIE/USB3) + that is part of STMicroelectronics STiH407 SoC. + +config PHY_ST_SPEAR1310_MIPHY + tristate "ST SPEAR1310-MIPHY driver" + select GENERIC_PHY + depends on MACH_SPEAR1310 || COMPILE_TEST + help + Support for ST SPEAr1310 MIPHY which can be used for PCIe and SATA. + +config PHY_ST_SPEAR1340_MIPHY + tristate "ST SPEAR1340-MIPHY driver" + select GENERIC_PHY + depends on MACH_SPEAR1340 || COMPILE_TEST + help + Support for ST SPEAr1340 MIPHY which can be used for PCIe and SATA. + +config PHY_STIH407_USB + tristate "STMicroelectronics USB2 picoPHY driver for STiH407 family" + depends on RESET_CONTROLLER + depends on ARCH_STI || COMPILE_TEST + select GENERIC_PHY + help + Enable this support to enable the picoPHY device used by USB2 + and USB3 controllers on STMicroelectronics STiH407 SoC families. diff --git a/drivers/phy/st/Makefile b/drivers/phy/st/Makefile new file mode 100644 index 000000000000..e2adfe2166d2 --- /dev/null +++ b/drivers/phy/st/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_PHY_MIPHY28LP) += phy-miphy28lp.o +obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o +obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o +obj-$(CONFIG_PHY_STIH407_USB) += phy-stih407-usb.o diff --git a/drivers/phy/phy-miphy28lp.c b/drivers/phy/st/phy-miphy28lp.c similarity index 100% rename from drivers/phy/phy-miphy28lp.c rename to drivers/phy/st/phy-miphy28lp.c diff --git a/drivers/phy/phy-spear1310-miphy.c b/drivers/phy/st/phy-spear1310-miphy.c similarity index 100% rename from drivers/phy/phy-spear1310-miphy.c rename to drivers/phy/st/phy-spear1310-miphy.c diff --git a/drivers/phy/phy-spear1340-miphy.c b/drivers/phy/st/phy-spear1340-miphy.c similarity index 100% rename from drivers/phy/phy-spear1340-miphy.c rename to drivers/phy/st/phy-spear1340-miphy.c diff --git a/drivers/phy/phy-stih407-usb.c b/drivers/phy/st/phy-stih407-usb.c similarity index 100% rename from drivers/phy/phy-stih407-usb.c rename to drivers/phy/st/phy-stih407-usb.c diff --git a/drivers/phy/ti/Kconfig b/drivers/phy/ti/Kconfig new file mode 100644 index 000000000000..20503562666c --- /dev/null +++ b/drivers/phy/ti/Kconfig @@ -0,0 +1,78 @@ +# +# Phy drivers for TI platforms +# +config PHY_DA8XX_USB + tristate "TI DA8xx USB PHY Driver" + depends on ARCH_DAVINCI_DA8XX + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the USB PHY on DA8xx SoCs. + + This driver controls both the USB 1.1 PHY and the USB 2.0 PHY. + +config PHY_DM816X_USB + tristate "TI dm816x USB PHY driver" + depends on ARCH_OMAP2PLUS + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + help + Enable this for dm816x USB to work. + +config OMAP_CONTROL_PHY + tristate "OMAP CONTROL PHY Driver" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + help + Enable this to add support for the PHY part present in the control + module. This driver has API to power on the USB2 PHY and to write to + the mailbox. The mailbox is present only in omap4 and the register to + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an + additional register to power on USB3 PHY/SATA PHY/PCIE PHY + (PIPE3 PHY). + +config OMAP_USB2 + tristate "OMAP USB2 PHY Driver" + depends on ARCH_OMAP2PLUS + depends on USB_SUPPORT + select GENERIC_PHY + select USB_PHY + select OMAP_CONTROL_PHY + depends on OMAP_OCP2SCP + help + Enable this to support the transceiver that is part of SOC. This + driver takes care of all the PHY functionality apart from comparator. + The USB OTG controller communicates with the comparator using this + driver. + +config TI_PIPE3 + tristate "TI PIPE3 PHY Driver" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + select GENERIC_PHY + select OMAP_CONTROL_PHY + depends on OMAP_OCP2SCP + help + Enable this to support the PIPE3 PHY that is part of TI SOCs. This + driver takes care of all the PHY functionality apart from comparator. + This driver interacts with the "OMAP Control PHY Driver" to power + on/off the PHY. + +config PHY_TUSB1210 + tristate "TI TUSB1210 ULPI PHY module" + depends on USB_ULPI_BUS + select GENERIC_PHY + help + Support for TI TUSB1210 USB ULPI PHY. + +config TWL4030_USB + tristate "TWL4030 USB Transceiver Driver" + depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS + depends on USB_SUPPORT + depends on USB_GADGET || !USB_GADGET # if USB_GADGET=m, this can't 'y' + select GENERIC_PHY + select USB_PHY + help + Enable this to support the USB OTG transceiver on TWL4030 + family chips (including the TWL5030 and TPS659x0 devices). + This transceiver supports high and full speed devices plus, + in host mode, low speed. diff --git a/drivers/phy/ti/Makefile b/drivers/phy/ti/Makefile new file mode 100644 index 000000000000..0cc3a1a557a3 --- /dev/null +++ b/drivers/phy/ti/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o +obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o +obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o +obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o +obj-$(CONFIG_PHY_TUSB1210) += phy-tusb1210.o +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o diff --git a/drivers/phy/phy-da8xx-usb.c b/drivers/phy/ti/phy-da8xx-usb.c similarity index 100% rename from drivers/phy/phy-da8xx-usb.c rename to drivers/phy/ti/phy-da8xx-usb.c diff --git a/drivers/phy/phy-dm816x-usb.c b/drivers/phy/ti/phy-dm816x-usb.c similarity index 100% rename from drivers/phy/phy-dm816x-usb.c rename to drivers/phy/ti/phy-dm816x-usb.c diff --git a/drivers/phy/phy-omap-control.c b/drivers/phy/ti/phy-omap-control.c similarity index 100% rename from drivers/phy/phy-omap-control.c rename to drivers/phy/ti/phy-omap-control.c diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/ti/phy-omap-usb2.c similarity index 100% rename from drivers/phy/phy-omap-usb2.c rename to drivers/phy/ti/phy-omap-usb2.c diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c similarity index 100% rename from drivers/phy/phy-ti-pipe3.c rename to drivers/phy/ti/phy-ti-pipe3.c diff --git a/drivers/phy/phy-tusb1210.c b/drivers/phy/ti/phy-tusb1210.c similarity index 100% rename from drivers/phy/phy-tusb1210.c rename to drivers/phy/ti/phy-tusb1210.c diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/ti/phy-twl4030-usb.c similarity index 100% rename from drivers/phy/phy-twl4030-usb.c rename to drivers/phy/ti/phy-twl4030-usb.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html