Set the received maximum size (RMS) according to the mtu size. It is
unnecessary to receive a packet which is more than the size we could
transmit. Besides, this could let the rx buffer be used effectively.
Signed-off-by: Hayes Wang <hayeswang@xxxxxxxxxxx>
---
drivers/net/usb/r8152.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 986243c..3a892fa 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -2898,7 +2898,8 @@ static void r8153_first_init(struct r8152 *tp)
rtl_rx_vlan_en(tp, tp->netdev->features & NETIF_F_HW_VLAN_CTAG_RX);
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8153_RMS);
+ ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + CRC_SIZE;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
ocp_write_byte(tp, MCU_TYPE_PLA, PLA_MTPS, MTPS_JUMBO);
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR0);
@@ -2950,7 +2951,8 @@ static void r8153_enter_oob(struct r8152 *tp)
usleep_range(1000, 2000);
}
- ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, RTL8153_RMS);
+ ocp_data = tp->netdev->mtu + VLAN_ETH_HLEN + CRC_SIZE;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, ocp_data);
ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TEREDO_CFG);
ocp_data &= ~TEREDO_WAKE_MASK;
@@ -4200,8 +4202,14 @@ static int rtl8152_change_mtu(struct net_device *dev, int new_mtu)
dev->mtu = new_mtu;
- if (netif_running(dev) && netif_carrier_ok(dev))
- r8153_set_rx_early_size(tp);
+ if (netif_running(dev)) {
+ u32 rms = new_mtu + VLAN_ETH_HLEN + CRC_SIZE;
+
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_RMS, rms);
+
+ if (netif_carrier_ok(dev))
+ r8153_set_rx_early_size(tp);
+ }
mutex_unlock(&tp->control);
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
