Setup each port to use the first bulk-out endpoint in calc_num_ports so
that core allocates the corresponding port resources for us.
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/usb/serial/mxuport.c | 103 +++++--------------------------------------
1 file changed, 12 insertions(+), 91 deletions(-)
diff --git a/drivers/usb/serial/mxuport.c b/drivers/usb/serial/mxuport.c
index 34142feffd4d..3aef091fe88b 100644
--- a/drivers/usb/serial/mxuport.c
+++ b/drivers/usb/serial/mxuport.c
@@ -951,6 +951,7 @@ static int mxuport_calc_num_ports(struct usb_serial *serial,
{
unsigned long features = (unsigned long)usb_get_serial_data(serial);
int num_ports;
+ int i;
if (features & MX_UPORT_2_PORT) {
num_ports = 2;
@@ -966,6 +967,17 @@ static int mxuport_calc_num_ports(struct usb_serial *serial,
num_ports = 2;
}
+ /*
+ * Setup bulk-out endpoint multiplexing. All ports share the same
+ * bulk-out endpoint.
+ */
+ BUILD_BUG_ON(ARRAY_SIZE(epds->bulk_out) < 16);
+
+ for (i = 1; i < num_ports; ++i)
+ epds->bulk_out[i] = epds->bulk_out[0];
+
+ epds->num_bulk_out = num_ports;
+
return num_ports;
}
@@ -1149,102 +1161,11 @@ static int mxuport_port_probe(struct usb_serial_port *port)
port->port_number);
}
-static int mxuport_alloc_write_urb(struct usb_serial *serial,
- struct usb_serial_port *port,
- struct usb_serial_port *port0,
- int j)
-{
- struct usb_device *dev = interface_to_usbdev(serial->interface);
-
- set_bit(j, &port->write_urbs_free);
- port->write_urbs[j] = usb_alloc_urb(0, GFP_KERNEL);
- if (!port->write_urbs[j])
- return -ENOMEM;
-
- port->bulk_out_buffers[j] = kmalloc(port0->bulk_out_size, GFP_KERNEL);
- if (!port->bulk_out_buffers[j])
- return -ENOMEM;
-
- usb_fill_bulk_urb(port->write_urbs[j], dev,
- usb_sndbulkpipe(dev, port->bulk_out_endpointAddress),
- port->bulk_out_buffers[j],
- port->bulk_out_size,
- serial->type->write_bulk_callback,
- port);
- return 0;
-}
-
-
-static int mxuport_alloc_write_urbs(struct usb_serial *serial,
- struct usb_serial_port *port,
- struct usb_serial_port *port0)
-{
- int j;
- int ret;
-
- for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
- ret = mxuport_alloc_write_urb(serial, port, port0, j);
- if (ret)
- return ret;
- }
- return 0;
-}
-
-
static int mxuport_attach(struct usb_serial *serial)
{
struct usb_serial_port *port0 = serial->port[0];
struct usb_serial_port *port1 = serial->port[1];
- struct usb_serial_port *port;
int err;
- int i;
- int j;
-
- /*
- * Throw away all but the first allocated write URBs so we can
- * set them up again to fit the multiplexing scheme.
- */
- for (i = 1; i < serial->num_bulk_out; ++i) {
- port = serial->port[i];
- for (j = 0; j < ARRAY_SIZE(port->write_urbs); ++j) {
- usb_free_urb(port->write_urbs[j]);
- kfree(port->bulk_out_buffers[j]);
- port->write_urbs[j] = NULL;
- port->bulk_out_buffers[j] = NULL;
- }
- port->write_urbs_free = 0;
- }
-
- /*
- * All write data is sent over the first bulk out endpoint,
- * with an added header to indicate the port. Allocate URBs
- * for each port to the first bulk out endpoint.
- */
- for (i = 1; i < serial->num_ports; ++i) {
- port = serial->port[i];
- port->bulk_out_size = port0->bulk_out_size;
- port->bulk_out_endpointAddress =
- port0->bulk_out_endpointAddress;
-
- err = mxuport_alloc_write_urbs(serial, port, port0);
- if (err)
- return err;
-
- port->write_urb = port->write_urbs[0];
- port->bulk_out_buffer = port->bulk_out_buffers[0];
-
- /*
- * Ensure each port has a fifo. The framework only
- * allocates a fifo to ports with a bulk out endpoint,
- * where as we need one for every port.
- */
- if (!kfifo_initialized(&port->write_fifo)) {
- err = kfifo_alloc(&port->write_fifo, PAGE_SIZE,
- GFP_KERNEL);
- if (err)
- return err;
- }
- }
/*
* All data from the ports is received on the first bulk in
--
2.12.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
