[patch 2.6.29-rc6 4/5] musb: only turn off vbus in OTG hosts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Ajay Kumar Gupta <ajay.gupta@xxxxxx>

Except on DaVinci, VBUS is now switched off as part of idling the
USB link (after a_wait_bcon) whenever a device is disconnected
from host.  This is correct for OTG hosts, where either SRP or
an ID interrupt could turn VBUS on again.

However, for non-OTG hosts there's no way to turn VBUS on again,
so the host becomes unusable.  And the procfs entry which once
allowed a manual workaround for this is now gone.

This patch adds an is_otg_enabled() check before scheduling the
switch-off timer in disconnect path, supporting a "classic host"
mode where SRP is unavailable.

[ dbrownell@xxxxxxxxxxxxxxxxxxxxx: tweak patch description ]

Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx>
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
---
 drivers/usb/musb/musb_core.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -769,7 +769,7 @@ static irqreturn_t musb_stage2_irq(struc
 		case OTG_STATE_A_SUSPEND:
 			usb_hcd_resume_root_hub(musb_to_hcd(musb));
 			musb_root_disconnect(musb);
-			if (musb->a_wait_bcon != 0)
+			if (musb->a_wait_bcon != 0 && is_otg_enabled(musb))
 				musb_platform_try_idle(musb, jiffies
 					+ msecs_to_jiffies(musb->a_wait_bcon));
 			break;
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux