From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
Feeding 32-bit length cast down to 'u16' to min() to calculate the FIFO
count in musb_host_tx() risks sending a short packet prematurely for
transfer sizes over 64 KB.
Similarly, although data transfer size shouldn't exceed 65535 bytes for
the control endpoint, making musb_h_ep0_continue() more robust WRT URBs
with possibly oversized buffer will not hurt either...
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Cc: Felipe Balbi <felipe.balbi@xxxxxxxxx>
---
BUGFIX: for 2.6.29-rc
drivers/usb/musb/musb_host.c | 14 +++++++-------
1 file changed, 7 insertions(+), 7 deletions(-)
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -937,8 +937,8 @@ static bool musb_h_ep0_continue(struct m
switch (musb->ep0_stage) {
case MUSB_EP0_IN:
fifo_dest = urb->transfer_buffer + urb->actual_length;
- fifo_count = min(len, ((u16) (urb->transfer_buffer_length
- - urb->actual_length)));
+ fifo_count = min_t(size_t, len, urb->transfer_buffer_length -
+ urb->actual_length);
if (fifo_count < len)
urb->status = -EOVERFLOW;
@@ -971,10 +971,9 @@ static bool musb_h_ep0_continue(struct m
}
/* FALLTHROUGH */
case MUSB_EP0_OUT:
- fifo_count = min(qh->maxpacket, ((u16)
- (urb->transfer_buffer_length
- - urb->actual_length)));
-
+ fifo_count = min_t(size_t, qh->maxpacket,
+ urb->transfer_buffer_length -
+ urb->actual_length);
if (fifo_count) {
fifo_dest = (u8 *) (urb->transfer_buffer
+ urb->actual_length);
@@ -1304,7 +1303,8 @@ void musb_host_tx(struct musb *musb, u8
* packets before updating TXCSR ... other docs disagree ...
*/
/* PIO: start next packet in this URB */
- wLength = min(qh->maxpacket, (u16) wLength);
+ if (wLength > qh->maxpacket)
+ wLength = qh->maxpacket;
musb_write_fifo(hw_ep, wLength, buf);
qh->segsize = wLength;
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
