From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
For some strange reason the host side musb_giveback() decides
that it's always got an IN transfer when the hardware endpoint
is using a shared FIFO. This causes musb_save_toggle() to read
the toggle state from the RXCSR register instead of TXCSR, and
may also cause unneeded reloading of RX endpoint registers.
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
Signed-off-by: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
---
BUGFIX: for 2.6.29-rc
drivers/usb/musb/musb_host.c | 7 +------
1 file changed, 1 insertion(+), 6 deletions(-)
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -335,16 +335,11 @@ musb_save_toggle(struct musb_hw_ep *ep,
static struct musb_qh *
musb_giveback(struct musb_qh *qh, struct urb *urb, int status)
{
- int is_in;
struct musb_hw_ep *ep = qh->hw_ep;
struct musb *musb = ep->musb;
+ int is_in = usb_pipein(urb->pipe);
int ready = qh->is_ready;
- if (ep->is_shared_fifo)
- is_in = 1;
- else
- is_in = usb_pipein(urb->pipe);
-
/* save toggle eagerly, for paranoia */
switch (qh->type) {
case USB_ENDPOINT_XFER_BULK:
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
