On Sat, Feb 04, 2017 at 11:25:29AM +0100, François M wrote: > Using Mygica T230 on Linux 4.9.7: > [ 1948.418802] usb 1-1: USB disconnect, device number 6 > [ 1948.455998] dvb-usb: Mygica T230 DVB-T/T2/C successfully > deinitialized and disconnected. > [ 1950.636574] usb 1-1: new high-speed USB device number 7 using xhci_hcd > [ 1950.770804] usb 1-1: language id specifier not provided by device, > defaulting to English > [ 1950.773837] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state. > [ 1950.909942] dvb-usb: recv bulk message failed: -11 > [ 1951.016674] dvb-usb: will pass the complete MPEG2 transport stream > to the software demuxer. > [ 1951.016920] DVB: registering new adapter (Mygica T230 DVB-T/T2/C) > [ 1951.021056] dvb-usb: recv bulk message failed: -11 > [ 1951.021071] si2168: probe of 10-0064 failed with error -121 > [ 1951.021077] dvb-usb: no frontend was attached by 'Mygica T230 DVB-T/T2/C' > [ 1951.021316] input: IR-receiver inside an USB DVB receiver as > /devices/pci0000:00/0000:00:14.0/usb1/1-1/input/input29 > [ 1951.021687] dvb-usb: schedule remote query interval to 100 msecs. > > Switching back to Linux 4.8.13 results in a working USB-DVB, and the > error/warning message don't show up. > > The configs are the same, so it seems a issue with the module(s) (si2168?). > Thanks! Any chance you can use 'git bisect' to track down the offending change? thanks, greg k-h -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
