Using Mygica T230 on Linux 4.9.7: [ 1948.418802] usb 1-1: USB disconnect, device number 6 [ 1948.455998] dvb-usb: Mygica T230 DVB-T/T2/C successfully deinitialized and disconnected. [ 1950.636574] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 1950.770804] usb 1-1: language id specifier not provided by device, defaulting to English [ 1950.773837] dvb-usb: found a 'Mygica T230 DVB-T/T2/C' in warm state. [ 1950.909942] dvb-usb: recv bulk message failed: -11 [ 1951.016674] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. [ 1951.016920] DVB: registering new adapter (Mygica T230 DVB-T/T2/C) [ 1951.021056] dvb-usb: recv bulk message failed: -11 [ 1951.021071] si2168: probe of 10-0064 failed with error -121 [ 1951.021077] dvb-usb: no frontend was attached by 'Mygica T230 DVB-T/T2/C' [ 1951.021316] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/input/input29 [ 1951.021687] dvb-usb: schedule remote query interval to 100 msecs. Switching back to Linux 4.8.13 results in a working USB-DVB, and the error/warning message don't show up. The configs are the same, so it seems a issue with the module(s) (si2168?). Thanks! -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
