From: John Stultz <john.stultz@xxxxxxxxxx>
When removing a USB-A to USB-otg adapter cable, we get a change
status irq, and then in dwc2_conn_id_status_change, we
erroniously see the GOTGCTL_CONID_B flag set. This causes us to
get stuck in the "while (!dwc2_is_device_mode(hsotg))" loop,
spitting out "Waiting for Peripheral Mode, Mode=Host" warnings
until it fails out many seconds later.
This patch works around the issue by re-reading the GOTGCTL
state to check if the GOTGCTL_CONID_B is still set and if not
restarting the change status logic.
I suspect this isn't the best solution, but it seems to work
well for me.
Feedback would be greatly appreciated!
Cc: Wei Xu <xuwei5@xxxxxxxxxxxxx>
Cc: Guodong Xu <guodong.xu@xxxxxxxxxx>
Cc: Amit Pundir <amit.pundir@xxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: John Youn <johnyoun@xxxxxxxxxxxx>
Cc: Douglas Anderson <dianders@xxxxxxxxxxxx>
Cc: Chen Yu <chenyu56@xxxxxxxxxx>
Cc: Vardan Mikayelyan <mvardan@xxxxxxxxxxxx>
Cc: Kishon Vijay Abraham I <kishon@xxxxxx>
Cc: Felipe Balbi <felipe.balbi@xxxxxxxxxxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Cc: linux-usb@xxxxxxxxxxxxxxx
Reviewed-by: Vardan Mikayelyan <mvardan@xxxxxxxxxxxx>
Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx>
---
drivers/usb/dwc2/hcd.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c
index 2c13a35922e1..274d64b5355c 100644
--- a/drivers/usb/dwc2/hcd.c
+++ b/drivers/usb/dwc2/hcd.c
@@ -3237,6 +3237,14 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
dwc2_is_host_mode(hsotg) ? "Host" :
"Peripheral");
usleep_range(20000, 40000);
+ /*
+ * Sometimes the initial GOTGCTRL read is wrong, so
+ * check it again and jump to host mode if that was
+ * the case.
+ */
+ gotgctl = dwc2_readl(hsotg->regs + GOTGCTL);
+ if (!(gotgctl & GOTGCTL_CONID_B))
+ goto host;
if (++count > 250)
break;
}
@@ -3251,6 +3259,7 @@ static void dwc2_conn_id_status_change(struct work_struct *work)
spin_unlock_irqrestore(&hsotg->lock, flags);
dwc2_hsotg_core_connect(hsotg);
} else {
+host:
/* A-Device connector (Host Mode) */
dev_dbg(hsotg->dev, "connId A\n");
while (!dwc2_is_host_mode(hsotg)) {
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
