[PATCH v2 19/28] usb: dwc2: Add debugfs file to show params

[John Youn <John.Youn@xxxxxxxxxxxx>]

Show the core params and hardware params.

Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx>
---
 drivers/usb/dwc2/debugfs.c | 127 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 127 insertions(+)

diff --git a/drivers/usb/dwc2/debugfs.c b/drivers/usb/dwc2/debugfs.c
index cad621f02972..57747b0df595 100644
--- a/drivers/usb/dwc2/debugfs.c
+++ b/drivers/usb/dwc2/debugfs.c
@@ -725,6 +725,120 @@ static const struct debugfs_reg32 dwc2_regs[] = {
 	dump_register(HCDMAB(15)),
 };
 
+#define print_param(_seq, _ptr, _param) \
+seq_printf((_seq), "%-30s: %d\n", #_param, (_ptr)->_param)
+
+#define print_param_hex(_seq, _ptr, _param) \
+seq_printf((_seq), "%-30s: 0x%x\n", #_param, (_ptr)->_param)
+
+static int params_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	struct dwc2_core_params *p = &hsotg->params;
+	int i;
+
+	print_param(seq, p, otg_cap);
+	print_param(seq, p, dma_desc_enable);
+	print_param(seq, p, dma_desc_fs_enable);
+	print_param(seq, p, speed);
+	print_param(seq, p, enable_dynamic_fifo);
+	print_param(seq, p, en_multiple_tx_fifo);
+	print_param(seq, p, host_rx_fifo_size);
+	print_param(seq, p, host_nperio_tx_fifo_size);
+	print_param(seq, p, host_perio_tx_fifo_size);
+	print_param(seq, p, max_transfer_size);
+	print_param(seq, p, max_packet_count);
+	print_param(seq, p, host_channels);
+	print_param(seq, p, phy_type);
+	print_param(seq, p, phy_utmi_width);
+	print_param(seq, p, phy_ulpi_ddr);
+	print_param(seq, p, phy_ulpi_ext_vbus);
+	print_param(seq, p, i2c_enable);
+	print_param(seq, p, ulpi_fs_ls);
+	print_param(seq, p, host_support_fs_ls_low_power);
+	print_param(seq, p, host_ls_low_power_phy_clk);
+	print_param(seq, p, ts_dline);
+	print_param(seq, p, reload_ctl);
+	print_param_hex(seq, p, ahbcfg);
+	print_param(seq, p, uframe_sched);
+	print_param(seq, p, external_id_pin_ctl);
+	print_param(seq, p, hibernation);
+	print_param(seq, p, host_dma);
+	print_param(seq, p, g_dma);
+	print_param(seq, p, g_dma_desc);
+	print_param(seq, p, g_rx_fifo_size);
+	print_param(seq, p, g_np_tx_fifo_size);
+
+	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
+		char str[32];
+
+		snprintf(str, 32, "g_tx_fifo_size[%d]", i);
+		seq_printf(seq, "%-30s: %d\n", str, p->g_tx_fifo_size[i]);
+	}
+
+	return 0;
+}
+
+static int params_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, params_show, inode->i_private);
+}
+
+static const struct file_operations params_fops = {
+	.owner		= THIS_MODULE,
+	.open		= params_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int hw_params_show(struct seq_file *seq, void *v)
+{
+	struct dwc2_hsotg *hsotg = seq->private;
+	struct dwc2_hw_params *hw = &hsotg->hw_params;
+
+	print_param(seq, hw, op_mode);
+	print_param(seq, hw, arch);
+	print_param(seq, hw, dma_desc_enable);
+	print_param(seq, hw, enable_dynamic_fifo);
+	print_param(seq, hw, en_multiple_tx_fifo);
+	print_param(seq, hw, rx_fifo_size);
+	print_param(seq, hw, host_nperio_tx_fifo_size);
+	print_param(seq, hw, dev_nperio_tx_fifo_size);
+	print_param(seq, hw, host_perio_tx_fifo_size);
+	print_param(seq, hw, nperio_tx_q_depth);
+	print_param(seq, hw, host_perio_tx_q_depth);
+	print_param(seq, hw, dev_token_q_depth);
+	print_param(seq, hw, max_transfer_size);
+	print_param(seq, hw, max_packet_count);
+	print_param(seq, hw, host_channels);
+	print_param(seq, hw, hs_phy_type);
+	print_param(seq, hw, fs_phy_type);
+	print_param(seq, hw, i2c_enable);
+	print_param(seq, hw, num_dev_ep);
+	print_param(seq, hw, num_dev_perio_in_ep);
+	print_param(seq, hw, total_fifo_size);
+	print_param(seq, hw, power_optimized);
+	print_param(seq, hw, utmi_phy_data_width);
+	print_param_hex(seq, hw, snpsid);
+	print_param_hex(seq, hw, dev_ep_dirs);
+
+	return 0;
+}
+
+static int hw_params_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, hw_params_show, inode->i_private);
+}
+
+static const struct file_operations hw_params_fops = {
+	.owner		= THIS_MODULE,
+	.open		= hw_params_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
 int dwc2_debugfs_init(struct dwc2_hsotg *hsotg)
 {
 	int			ret;
@@ -736,6 +850,19 @@ int dwc2_debugfs_init(struct dwc2_hsotg *hsotg)
 		goto err0;
 	}
 
+	file = debugfs_create_file("params", 0444,
+				   hsotg->debug_root,
+				   hsotg, &params_fops);
+	if (IS_ERR(file))
+		dev_err(hsotg->dev, "%s: failed to create params\n", __func__);
+
+	file = debugfs_create_file("hw_params", 0444,
+				   hsotg->debug_root,
+				   hsotg, &hw_params_fops);
+	if (IS_ERR(file))
+		dev_err(hsotg->dev, "%s: failed to create hw_params\n",
+			__func__);
+
 	/* Add gadget debugfs nodes */
 	dwc2_hsotg_create_debug(hsotg);
 
-- 
2.11.0

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html