The otg_ver parameter only controls the SRP pulsing method and defaults to the 1.3 behavior. It is unused and can be removed. Signed-off-by: John Youn <johnyoun@xxxxxxxxxxxx> --- drivers/usb/dwc2/core.c | 5 ----- drivers/usb/dwc2/core.h | 9 --------- drivers/usb/dwc2/hcd.c | 3 --- drivers/usb/dwc2/params.c | 23 ----------------------- 4 files changed, 40 deletions(-) diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index 0446f3d6d54a..0d322b7d4b28 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -751,11 +751,6 @@ bool dwc2_force_mode_if_needed(struct dwc2_hsotg *hsotg, bool host) return dwc2_force_mode(hsotg, host); } -u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg) -{ - return hsotg->params.otg_ver == 1 ? 0x0200 : 0x0103; -} - bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg) { if (dwc2_readl(hsotg->regs + GSNPSID) == 0xffffffff) diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index 2fdd74d502c0..73514f263e40 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -298,9 +298,6 @@ enum dwc2_ep0_state { * 1 - SRP Only capable * 2 - No HNP/SRP capable (always available) * Defaults to best available option (0, 1, then 2) - * @otg_ver: OTG version supported - * 0 - 1.3 (default) - * 1 - 2.0 * @host_dma: Specifies whether to use slave or DMA mode for accessing * the data FIFOs. The driver will automatically detect the * value for this parameter if none is specified. @@ -464,7 +461,6 @@ struct dwc2_core_params { #define DWC2_CAP_PARAM_SRP_ONLY_CAPABLE 1 #define DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE 2 - int otg_ver; int dma_desc_enable; int dma_desc_fs_enable; int speed; @@ -1175,11 +1171,6 @@ void dwc2_dump_dev_registers(struct dwc2_hsotg *hsotg); void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg); void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg); -/* - * Return OTG version - either 1.3 or 2.0 - */ -u16 dwc2_get_otg_version(struct dwc2_hsotg *hsotg); - /* Gadget defines */ #if IS_ENABLED(CONFIG_USB_DWC2_PERIPHERAL) || \ IS_ENABLED(CONFIG_USB_DWC2_DUAL_ROLE) diff --git a/drivers/usb/dwc2/hcd.c b/drivers/usb/dwc2/hcd.c index 96454b121f77..efd2c733695c 100644 --- a/drivers/usb/dwc2/hcd.c +++ b/drivers/usb/dwc2/hcd.c @@ -2260,10 +2260,7 @@ static int dwc2_core_init(struct dwc2_hsotg *hsotg, bool initial_setup) /* Program the GOTGCTL register */ otgctl = dwc2_readl(hsotg->regs + GOTGCTL); otgctl &= ~GOTGCTL_OTGVER; - if (hsotg->params.otg_ver > 0) - otgctl |= GOTGCTL_OTGVER; dwc2_writel(otgctl, hsotg->regs + GOTGCTL); - dev_dbg(hsotg->dev, "OTG VER PARAM: %d\n", hsotg->params.otg_ver); /* Clear the SRP success bit for FS-I2c */ hsotg->srp_success = 0; diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c index bcd1e19b4076..074f4061206a 100644 --- a/drivers/usb/dwc2/params.c +++ b/drivers/usb/dwc2/params.c @@ -40,7 +40,6 @@ static const struct dwc2_core_params params_hi6220 = { .otg_cap = 2, /* No HNP/SRP capable */ - .otg_ver = 0, /* 1.3 */ .dma_desc_enable = 0, .dma_desc_fs_enable = 0, .speed = 0, /* High Speed */ @@ -71,7 +70,6 @@ static const struct dwc2_core_params params_hi6220 = { static const struct dwc2_core_params params_bcm2835 = { .otg_cap = 0, /* HNP/SRP capable */ - .otg_ver = 0, /* 1.3 */ .dma_desc_enable = 0, .dma_desc_fs_enable = 0, .speed = 0, /* High Speed */ @@ -101,7 +99,6 @@ static const struct dwc2_core_params params_bcm2835 = { static const struct dwc2_core_params params_rk3066 = { .otg_cap = 2, /* non-HNP/non-SRP */ - .otg_ver = -1, .dma_desc_enable = 0, .dma_desc_fs_enable = 0, .speed = -1, @@ -132,7 +129,6 @@ static const struct dwc2_core_params params_rk3066 = { static const struct dwc2_core_params params_ltq = { .otg_cap = 2, /* non-HNP/non-SRP */ - .otg_ver = -1, .dma_desc_enable = -1, .dma_desc_fs_enable = -1, .speed = -1, @@ -163,7 +159,6 @@ static const struct dwc2_core_params params_ltq = { static const struct dwc2_core_params params_amlogic = { .otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE, - .otg_ver = -1, .dma_desc_enable = 0, .dma_desc_fs_enable = 0, .speed = DWC2_SPEED_PARAM_HIGH, @@ -194,7 +189,6 @@ static const struct dwc2_core_params params_amlogic = { static const struct dwc2_core_params params_default = { .otg_cap = -1, - .otg_ver = -1, /* * Disable descriptor dma mode by default as the HW can support @@ -978,22 +972,6 @@ static void dwc2_set_param_ahbcfg(struct dwc2_hsotg *hsotg, int val) GAHBCFG_HBSTLEN_SHIFT; } -static void dwc2_set_param_otg_ver(struct dwc2_hsotg *hsotg, int val) -{ - if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { - if (val >= 0) { - dev_err(hsotg->dev, - "'%d' invalid for parameter otg_ver\n", val); - dev_err(hsotg->dev, - "otg_ver must be 0 (for OTG 1.3 support) or 1 (for OTG 2.0 support)\n"); - } - val = 0; - dev_dbg(hsotg->dev, "Setting otg_ver to %d\n", val); - } - - hsotg->params.otg_ver = val; -} - static void dwc2_set_param_uframe_sched(struct dwc2_hsotg *hsotg, int val) { if (DWC2_OUT_OF_BOUNDS(val, 0, 1)) { @@ -1154,7 +1132,6 @@ static void dwc2_set_parameters(struct dwc2_hsotg *hsotg, params->en_multiple_tx_fifo); dwc2_set_param_reload_ctl(hsotg, params->reload_ctl); dwc2_set_param_ahbcfg(hsotg, params->ahbcfg); - dwc2_set_param_otg_ver(hsotg, params->otg_ver); dwc2_set_param_uframe_sched(hsotg, params->uframe_sched); dwc2_set_param_external_id_pin_ctl(hsotg, params->external_id_pin_ctl); dwc2_set_param_hibernation(hsotg, params->hibernation); -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html