This patch adds device tree bindings documentation for Synopsys
USB device controller platform driver.
Signed-off-by: Raviteja Garimella <raviteja.garimella@xxxxxxxxxxxx>
---
.../devicetree/bindings/usb/snps,dw-ahb-udc.txt | 27 ++++++++++++++++++++++
1 file changed, 27 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt
diff --git a/Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt b/Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt
new file mode 100644
index 0000000..0c18327
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/snps,dw-ahb-udc.txt
@@ -0,0 +1,27 @@
+Synopsys USB Device controller.
+
+The device node is used for Synopsys Designware Cores AHB
+Subsystem Device Controller (UDC).
+
+This device node is used by UDCs integrated it Broadcom's
+Northstar2 and Cygnus SoC's.
+
+Required properties:
+ - compatible: should be "snps,dw-ahb-udc"
+ - reg: Offset and length of UDC register set
+ - interrupts: description of interrupt line
+ - phys: phandle to phy node.
+ - extcon: phandle to the extcon device. This is optional and
+ not required for those that don't require extcon support.
+ Extcon support will be required if the UDC is connected to
+ a Dual Role Device Phy that supports both Host and Device
+ mode based on the external cable.
+
+Example:
+ udc_dwc: usb@664e0000 {
+ compatible = "snps,dw-ahb-udc";
+ reg = <0x664e0000 0x2000>;
+ interrupts = <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbdrd_phy>;
+ extcon = <&usbdrd_phy>";
+ };
--
2.1.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
