Commit fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support")
together with recent MUSB changes allowed USB and DMA on BeagleBone to idle
when no cable is connected. But looks like few corner case issues still
remain.
Looks like just by repluging USB cable about ten or so times on BeagleBone
when configured in USB peripheral mode we can get warnings and eventually
trigger an oops in cppi41 DMA:
WARNING: CPU: 0 PID: 14 at drivers/dma/cppi41.c:1154 cppi41_runtime_suspend+
x28/0x38 [cppi41]
...
WARNING: CPU: 0 PID: 14 at drivers/dma/cppi41.c:452
push_desc_queue+0x94/0x9c [cppi41]
...
Unable to handle kernel NULL pointer dereference at virtual
address 00000104
pgd = c0004000
[00000104] *pgd=00000000
Internal error: Oops: 805 [#1] SMP ARM
...
[<bf0d92cc>] (cppi41_runtime_resume [cppi41]) from [<c0589838>]
(__rpm_callback+0xc0/0x214)
[<c0589838>] (__rpm_callback) from [<c05899ac>] (rpm_callback+0x20/0x80)
[<c05899ac>] (rpm_callback) from [<c0589460>] (rpm_resume+0x504/0x78c)
[<c0589460>] (rpm_resume) from [<c058a1a0>] (pm_runtime_work+0x60/0xa8)
[<c058a1a0>] (pm_runtime_work) from [<c0156120>] (process_one_work+0x2b4/0x808)
This is because of a race with PM runtime and cppi41_dma_issue_pending()
as reported by Alexandre Bailon <abailon@xxxxxxxxxxxx> in earlier
set of patches. Based on mailing list discussions we however came to the
conclusion that a different fix from Alexandre's fix is needed in order
to guarantee that DMA is really active when we try to use it.
To fix the issue, we need to add a driver specific flag as we otherwise
can have -EINPROGRESS state set by PM runtime and can't rely on
pm_runtime_active() to tell us when we can use the DMA.
For reference, this is also documented in Documentation/power/runtime_pm.txt
in the example at the end of the file as pointed out by Grygorii Strashko
<grygorii.strashko@xxxxxx>.
So let's fix the issue by introducing atomic_t active that gets toggled
in runtime_suspend() and runtime_resume(). And then let's replace the
pm_runtime_active() checks with atomic_read().
Note that we may also get transactions queued while in -EINPROGRESS
state. So we need to check for new elements in cppi41_runtime_resume()
by replacing list_for_each_entry_safe() with the commonly used test for
while (!list_empty(&cdd->pending)).
Fixes: fdea2d09b997 ("dmaengine: cppi41: Add basic PM runtime support")
Cc: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Cc: Bin Liu <b-liu@xxxxxx>
Cc: Grygorii Strashko <grygorii.strashko@xxxxxx>
Cc: Kevin Hilman <khilman@xxxxxxxxxxxx>
Cc: Patrick Titiano <ptitiano@xxxxxxxxxxxx>
Cc: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
Reported-by: Alexandre Bailon <abailon@xxxxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
drivers/dma/cppi41.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/drivers/dma/cppi41.c b/drivers/dma/cppi41.c
--- a/drivers/dma/cppi41.c
+++ b/drivers/dma/cppi41.c
@@ -1,3 +1,4 @@
+#include <linux/atomic.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/dma-mapping.h>
@@ -153,6 +154,8 @@ struct cppi41_dd {
/* context for suspend/resume */
unsigned int dma_tdfdq;
+
+ atomic_t active;
};
#define FIST_COMPLETION_QUEUE 93
@@ -320,7 +323,8 @@ static irqreturn_t cppi41_irq(int irq, void *data)
int error;
error = pm_runtime_get(cdd->ddev.dev);
- if (error < 0)
+ if (((error != -EINPROGRESS) && error < 0) ||
+ !atomic_read(&cdd->active))
dev_err(cdd->ddev.dev, "%s pm runtime get: %i\n",
__func__, error);
@@ -482,7 +486,7 @@ static void cppi41_dma_issue_pending(struct dma_chan *chan)
return;
}
- if (likely(pm_runtime_active(cdd->ddev.dev)))
+ if (likely(atomic_read(&cdd->active)))
push_desc_queue(c);
else
pending_desc(c);
@@ -1003,6 +1007,7 @@ static int cppi41_dma_probe(struct platform_device *pdev)
cdd->ddev.dst_addr_widths = CPPI41_DMA_BUSWIDTHS;
cdd->ddev.residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
cdd->ddev.dev = dev;
+ atomic_set(&cdd->active, 0);
INIT_LIST_HEAD(&cdd->ddev.channels);
cpp41_dma_info.dma_cap = cdd->ddev.cap_mask;
@@ -1151,6 +1156,7 @@ static int __maybe_unused cppi41_runtime_suspend(struct device *dev)
{
struct cppi41_dd *cdd = dev_get_drvdata(dev);
+ atomic_set(&cdd->active, 0);
WARN_ON(!list_empty(&cdd->pending));
return 0;
@@ -1159,13 +1165,20 @@ static int __maybe_unused cppi41_runtime_suspend(struct device *dev)
static int __maybe_unused cppi41_runtime_resume(struct device *dev)
{
struct cppi41_dd *cdd = dev_get_drvdata(dev);
- struct cppi41_channel *c, *_c;
+ struct cppi41_channel *c;
unsigned long flags;
+ atomic_set(&cdd->active, 1);
+
spin_lock_irqsave(&cdd->lock, flags);
- list_for_each_entry_safe(c, _c, &cdd->pending, node) {
- push_desc_queue(c);
+ while (!list_empty(&cdd->pending)) {
+ c = list_first_entry(&cdd->pending,
+ struct cppi41_channel,
+ node);
list_del(&c->node);
+ spin_unlock_irqrestore(&cdd->lock, flags);
+ push_desc_queue(c);
+ spin_lock_irqsave(&cdd->lock, flags);
}
spin_unlock_irqrestore(&cdd->lock, flags);
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
