Make sure to detect short control-message transfers when fetching
modem and line state in open and when retrieving registers.
This specifically makes sure that an errno is returned to user space on
errors in TIOCMGET instead of a zero bitmask.
Also drop the unused getdevice function which also lacked appropriate
error handling.
Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver")
Signed-off-by: Johan Hovold <johan@xxxxxxxxxx>
---
drivers/usb/serial/quatech2.c | 24 +++++++++++++-----------
1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c
index 5709cc93b083..cf29128327d3 100644
--- a/drivers/usb/serial/quatech2.c
+++ b/drivers/usb/serial/quatech2.c
@@ -188,22 +188,22 @@ static inline int qt2_setdevice(struct usb_device *dev, u8 *data)
}
-static inline int qt2_getdevice(struct usb_device *dev, u8 *data)
-{
- return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
- QT_SET_GET_DEVICE, 0xc0, 0, 0,
- data, 3, QT2_USB_TIMEOUT);
-}
-
static inline int qt2_getregister(struct usb_device *dev,
u8 uart,
u8 reg,
u8 *data)
{
- return usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
- QT_SET_GET_REGISTER, 0xc0, reg,
- uart, data, sizeof(*data), QT2_USB_TIMEOUT);
+ int ret;
+
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ QT_SET_GET_REGISTER, 0xc0, reg,
+ uart, data, sizeof(*data), QT2_USB_TIMEOUT);
+ if (ret < sizeof(*data)) {
+ if (ret >= 0)
+ ret = -EIO;
+ }
+ return ret;
}
static inline int qt2_setregister(struct usb_device *dev,
@@ -372,9 +372,11 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port)
0xc0, 0,
device_port, data, 2, QT2_USB_TIMEOUT);
- if (status < 0) {
+ if (status < 2) {
dev_err(&port->dev, "%s - open port failed %i\n", __func__,
status);
+ if (status >= 0)
+ status = -EIO;
kfree(data);
return status;
}
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
