William, On 12/01/17 14:03, William Wu wrote: > From: William wu <wulf@xxxxxxxxxxxxxx> > > On some platforms(e.g. rk3399 board), we can call hcd_add/remove > consecutively without calling usb_put_hcd/usb_create_hcd in between, > so hcd->flags can be stale. > > If the HC dies due to whatever reason then without this patch we get > the below error on next hcd_add. > > [173.296154] xhci-hcd xhci-hcd.2.auto: HC died; cleaning up > [173.296209] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller > [173.296762] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 6 > [173.296931] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. > [173.297179] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003 > [173.297203] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 > [173.297222] usb usb6: Product: xHCI Host Controller > [173.297240] usb usb6: Manufacturer: Linux 4.4.21 xhci-hcd > [173.297257] usb usb6: SerialNumber: xhci-hcd.2.auto > [173.298680] hub 6-0:1.0: USB hub found > [173.298749] hub 6-0:1.0: 1 port detected > [173.299382] rockchip-dwc3 usb@fe800000: USB HOST connected > [173.395418] hub 5-0:1.0: activate --> -19 > [173.603447] irq 228: nobody cared (try booting with the "irqpoll" option) > [173.603493] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.4.21 #9 > [173.603513] Hardware name: Google Kevin (DT) > [173.603531] Call trace: > [173.603568] [<ffffffc0002087dc>] dump_backtrace+0x0/0x160 > [173.603596] [<ffffffc00020895c>] show_stack+0x20/0x28 > [173.603623] [<ffffffc0004b28a8>] dump_stack+0x90/0xb0 > [173.603650] [<ffffffc00027347c>] __report_bad_irq+0x48/0xe8 > [173.603674] [<ffffffc0002737cc>] note_interrupt+0x1e8/0x28c > [173.603698] [<ffffffc000270a38>] handle_irq_event_percpu+0x1d4/0x25c > [173.603722] [<ffffffc000270b0c>] handle_irq_event+0x4c/0x7c > [173.603748] [<ffffffc00027456c>] handle_fasteoi_irq+0xb4/0x124 > [173.603777] [<ffffffc00026fe3c>] generic_handle_irq+0x30/0x44 > [173.603804] [<ffffffc0002701a8>] __handle_domain_irq+0x90/0xbc > [173.603827] [<ffffffc0002006f4>] gic_handle_irq+0xcc/0x188 > ... > [173.604500] [<ffffffc000203700>] el1_irq+0x80/0xf8 > [173.604530] [<ffffffc000261388>] cpu_startup_entry+0x38/0x3cc > [173.604558] [<ffffffc00090f7d8>] rest_init+0x8c/0x94 > [173.604585] [<ffffffc000e009ac>] start_kernel+0x3d0/0x3fc > [173.604607] [<0000000000b16000>] 0xb16000 > [173.604622] handlers: > [173.604648] [<ffffffc000642084>] usb_hcd_irq > [173.604673] Disabling IRQ #228 > > Signed-off-by: William wu <wulf@xxxxxxxxxxxxxx> > Signed-off-by: William wu <william.wu@xxxxxxxxxxxxxx> > --- > drivers/usb/core/hcd.c | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c > index 479e223..612fab6 100644 > --- a/drivers/usb/core/hcd.c > +++ b/drivers/usb/core/hcd.c > @@ -3017,6 +3017,7 @@ void usb_remove_hcd(struct usb_hcd *hcd) > } > > usb_put_invalidate_rhdev(hcd); > + hcd->flags = 0; > } > EXPORT_SYMBOL_GPL(usb_remove_hcd); > > I suggest to initialize hcd->flags to 0 in usb_add_hcd() instead. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
