Re: [PATCH 1/1] usb: xhci: set RWE only for remote wakeup capable devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Mathias,

On 01/12/2017 04:53 PM, Lu Baolu wrote:
> Xhci spec requires in section 4.23.5.1.1.1 that the RWE bit of USB2
> PORTPMSC register should only set for remote wakeup capble devices.
>
> This was suggested by Mathias in the following discussion thread.
> http://marc.info/?l=linux-usb&m=148154757829677&w=2
>
> Suggested-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
> Signed-off-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
> ---
>  drivers/usb/host/xhci.c | 4 +++-
>  1 file changed, 3 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
> index 0c8deb9..d887e09 100644
> --- a/drivers/usb/host/xhci.c
> +++ b/drivers/usb/host/xhci.c
> @@ -4191,7 +4191,9 @@ int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
>  		}
>  
>  		pm_val &= ~PORT_HIRD_MASK;
> -		pm_val |= PORT_HIRD(hird) | PORT_RWE | PORT_L1DS(udev->slot_id);
> +		pm_val |= PORT_HIRD(hird) | PORT_L1DS(udev->slot_id);
> +		if (udev->do_remote_wakeup)

This is not the right thing to check remote wakeup capability of a device.
I will rework it and submit v2. Please just ignore this one.

Sorry about this.

Best regards,
Lu Baolu

> +			pm_val |= PORT_RWE;
>  		writel(pm_val, pm_addr);
>  		pm_val = readl(pm_addr);
>  		pm_val |= PORT_HLE;

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux