Adds the device tree bindings description for Samsung S3C2410 and
compatible USB device controller.
Signed-off-by: Sergio Prado <sergio.prado@xxxxxxxxxxxxxx>
---
.../devicetree/bindings/usb/s3c2410-usb.txt | 28 ++++++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/s3c2410-usb.txt b/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
index e45b38ce2986..28353eea31fd 100644
--- a/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
+++ b/Documentation/devicetree/bindings/usb/s3c2410-usb.txt
@@ -20,3 +20,31 @@ usb0: ohci@49000000 {
clocks = <&clocks UCLK>, <&clocks HCLK_USBH>;
clock-names = "usb-bus-host", "usb-host";
};
+
+Samsung S3C2410 and compatible USB device controller
+
+Required properties:
+ - compatible: Should be one of the following
+ "samsung,s3c2410-udc"
+ "samsung,s3c2440-udc"
+ - reg: address and length of the controller memory mapped region
+ - interrupts: interrupt number for the USB device controller
+ - clocks: Should reference the bus and host clocks
+ - clock-names: Should contain two strings
+ "uclk" for the USB bus clock
+ "usb-device" for the USB device clock
+
+Optional properties:
+ - samsung,vbus-gpio: specifies a gpio that allows to detect whether
+ vbus is present - USB is connected (active high, input).
+ - samsung,pullup-gpio: If present, specifies a gpio to control the
+ USB D+ pullup (active high, output).
+
+usb1: udc@52000000 {
+ compatible = "samsung,s3c2440-udc";
+ reg = <0x52000000 0x100000>;
+ interrupts = <0 0 25 3>;
+ clocks = <&clocks UCLK>, <&clocks HCLK_USBD>;
+ clock-names = "usb-bus-gadget", "usb-device";
+ samsung,pullup-gpio = <&gpc 5 GPIO_ACTIVE_HIGH>;
+};
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
