On Fri, Sep 23, 2016 at 04:40:58PM +0300, Hans de Goede wrote: > The sunxi musb has a bug where sometimes it will generate a babble > error on device disconnect instead of a disconnect irq. When this > happens the musb-controller switches from host mode to device mode > (it clears MUSB_DEVCTL_SESSION and sets MUSB_DEVCTL_BDEVICE) and > gets stuck in this state. > > Clearing this requires reporting Vbus low for 200 or more ms, but > on some devices Vbus is simply always high (host-only mode, no Vbus > control). > > This commit adds a sunxi_musb_recover() callback which makes > sunxi_musb_work call phy_set_mode with the current mode, which > will force end the current session. > > This fixes the musb controller getting stuck in this state on systems > without Vbus control; and also fixes the need to unplug the usb-b -> > usb-a cable to get out of this state on systems with Vbus control. > > Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx> Applied. Thanks. -Bin. > --- > Changes in v2: > -Use musb_platform_recover callback instead of using DYI code in the > interrupt handler > -Call phy_set_mode with the current mode instead of adding a new custom > sunxi phy callback > --- > drivers/usb/musb/sunxi.c | 15 +++++++++++++++ > 1 file changed, 15 insertions(+) > > diff --git a/drivers/usb/musb/sunxi.c b/drivers/usb/musb/sunxi.c > index 82eba92..d0be0ea 100644 > --- a/drivers/usb/musb/sunxi.c > +++ b/drivers/usb/musb/sunxi.c > @@ -380,6 +380,20 @@ static int sunxi_musb_set_mode(struct musb *musb, u8 mode) > return 0; > } > > +static int sunxi_musb_recover(struct musb *musb) > +{ > + struct sunxi_glue *glue = dev_get_drvdata(musb->controller->parent); > + > + /* > + * Schedule a phy_set_mode with the current glue->phy_mode value, > + * this will force end the current session. > + */ > + set_bit(SUNXI_MUSB_FL_PHY_MODE_PEND, &glue->flags); > + schedule_work(&glue->work); > + > + return 0; > +} > + > /* > * sunxi musb register layout > * 0x00 - 0x17 fifo regs, 1 long per fifo > @@ -608,6 +622,7 @@ static const struct musb_platform_ops sunxi_musb_ops = { > .dma_init = sunxi_musb_dma_controller_create, > .dma_exit = sunxi_musb_dma_controller_destroy, > .set_mode = sunxi_musb_set_mode, > + .recover = sunxi_musb_recover, > .set_vbus = sunxi_musb_set_vbus, > .pre_root_reset_end = sunxi_musb_pre_root_reset_end, > .post_root_reset_end = sunxi_musb_post_root_reset_end, > -- > 2.9.3 > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html