On Wed, Sep 21, 2016 at 11:07:07AM +0200, Fabien Lahoudere wrote: > This binding allow to disable the internal 60Mhz clock for USB host2 or > host3. > > Signed-off-by: Fabien Lahoudere <fabien.lahoudere@xxxxxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt | 1 + > drivers/usb/chipidea/ci_hdrc_imx.c | 2 ++ > drivers/usb/chipidea/ci_hdrc_imx.h | 1 + > drivers/usb/chipidea/usbmisc_imx.c | 13 +++++++++++++ > 4 files changed, 17 insertions(+) > > diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > index 0e03344..f83da66 100644 > --- a/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-usb2.txt > @@ -84,6 +84,7 @@ i.mx specific properties > - over-current-active-high: over current signal polarity is high active, > typically over current signal polarity is low active. > - external-vbus-divider: enables off-chip resistor divider for Vbus > +- disable-int60ck: disable internal 60MHz clock for usb host2 or host3 on imx53 Doesn't this depend on something else like the type of phy connected? If not, when can you do this or not? Rob -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
