Hi Felipe,
On 09/08/2016 04:41 PM, Lu Baolu wrote:
> Commit 50c763f8c1bac ("usb: dwc3: Set the ClearPendIN bit on Clear
> Stall EP command") sets ClearPendIN bit for all IN endpoints in
> v2.60a+ cores no matter which speed mode they're in. This causes
> Clear Stall EP command failing on some Intel devices.
>
> In page 539 of 2.60a specification, it says:
>
> "When issuing Clear Stall command for IN endpoints in SuperSpeed
> mode, the software must set the "ClearPendIN" bit to '1' to
> clear any pending IN transcations, so that the device does not
> expect any ACK TP from the host for the data sent earlier."
>
> It's obviously that we only need to apply this rule to those IN
> endpoints in SuperSpeed mode.
>
> Fixes: 50c763f8c1bac ("usb: dwc3: Set the ClearPendIN bit on Clear Stall EP command")
> Cc: stable@xxxxxxxxxxxxxxx # 4.7+
> Signed-off-by: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
> ---
> drivers/usb/dwc3/gadget.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
> index 7a8d3d8..f1858d6 100644
> --- a/drivers/usb/dwc3/gadget.c
> +++ b/drivers/usb/dwc3/gadget.c
> @@ -348,7 +348,8 @@ static int dwc3_send_clear_stall_ep_cmd(struct dwc3_ep *dep)
> * IN transfers due to a mishandled error condition. Synopsys
> * STAR 9000614252.
> */
> - if (dep->direction && (dwc->revision >= DWC3_REVISION_260A))
> + if (dep->direction && (dwc->revision >= DWC3_REVISION_260A) &&
> + (dwc->maximum_speed >= USB_SPEED_SUPER))
> cmd |= DWC3_DEPCMD_CLEARPENDIN;
>
> memset(¶ms, 0, sizeof(params));
Oh, my bad.
I'm sending you a patch which hasn't been verified on the real
hardware yet.
My mind goes blank after a whole day's work. Poor me. :-(
I will send you a refreshed one tomorrow. Really sorry about it.
Best regards,
Lu Baolu
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
