Hi Eric, > Eric Anholt <eric@xxxxxxxxxx> hat am 18. August 2016 um 20:14 geschrieben: > > > Stefan Wahren <stefan.wahren@xxxxxxxx> writes: > > > This patch series is only a draft and not intended to be merged. Patches 1 > > and 2 > > aren't bcm2835 specific and should be helpful for other platforms. > > The patches 2 - 4 are required for otg / gadget mode. The last patch > > based on the work of Lubomir Rintel [1] and Noralf Trønnes [2]. > > > > Changes since V1: > > - rebase to current linux-next > > - add patches 1 - 4 for otg/gadget support > > - add patch 5 with model compatible > > - use polarity define for ACT LED > > > > [1] - > > http://lists.infradead.org/pipermail/linux-rpi-kernel/2016-February/003221.html > > [2] - https://github.com/raspberrypi/linux/pull/1239/ > > > > Stefan Wahren (6): > > usb: dwc2: core: Avoid nonsense error in gadget mode > > usb: dwc2: Add DT properties to specify fifo size in host/otg mode > > ARM: dts: bcm283x: Add missing usb clock > > ARM: dts: bcm283x: Add generic USB PHY > > DT: bindings: bcm: Add Raspberry Pi Zero > > ARM: dts: bcm2835: Add Raspberry Pi Zero > > Where are we at on these? I would like to split the series: part 1: Raspberry Pi Zero support (only USB host mode support) part 2: OTG / Peripheral support for BCM2835 (hope that i reach the point) > I've been holding off waiting for the USB > bits to get settled. I can grab the bindings patch, but is there > anything else we could merge while you're working on USB? Maybe i missed something, but i didn't received any ACK from you about this series. In case everything is okay, you could also merge patch 3 since it's relevant to bcm283x and not RPi Zero specific. Stefan -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
