This patch series is only a draft and not intended to be merged. Patches 1 and 2 aren't bcm2835 specific and should be helpful for other platforms. The patches 2 - 4 are required for otg / gadget mode. The last patch based on the work of Lubomir Rintel [1] and Noralf Trønnes [2]. Changes since V1: - rebase to current linux-next - add patches 1 - 4 for otg/gadget support - add patch 5 with model compatible - use polarity define for ACT LED [1] - http://lists.infradead.org/pipermail/linux-rpi-kernel/2016-February/003221.html [2] - https://github.com/raspberrypi/linux/pull/1239/ Stefan Wahren (6): usb: dwc2: core: Avoid nonsense error in gadget mode usb: dwc2: Add DT properties to specify fifo size in host/otg mode ARM: dts: bcm283x: Add missing usb clock ARM: dts: bcm283x: Add generic USB PHY DT: bindings: bcm: Add Raspberry Pi Zero ARM: dts: bcm2835: Add Raspberry Pi Zero .../devicetree/bindings/arm/bcm/brcm,bcm2835.txt | 4 ++ Documentation/devicetree/bindings/usb/dwc2.txt | 3 ++ arch/arm/boot/dts/Makefile | 3 +- arch/arm/boot/dts/bcm2835-rpi-zero.dts | 57 ++++++++++++++++++++ arch/arm/boot/dts/bcm283x.dtsi | 15 ++++++ drivers/usb/dwc2/core.c | 35 +++++++++--- 6 files changed, 108 insertions(+), 9 deletions(-) create mode 100644 arch/arm/boot/dts/bcm2835-rpi-zero.dts -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
