RE: [PATCH] usb:solve resume usb device identification problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

> -----Original Message-----
> From: Lu Baolu [mailto:baolu.lu@xxxxxxxxxxxxxxx]
> Sent: Tuesday, July 12, 2016 8:42 AM
> To: Lipengcheng; gregkh@xxxxxxxxxxxxxxxxxxx; stern@xxxxxxxxxxxxxxxxxxx; chasemetzger15@xxxxxxxxx; mathias.nyman@xxxxxxxxxxxxxxx;
> oneukum@xxxxxxxx; jun.li@xxxxxxxxxxxxx
> Cc: linux-usb@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
> Subject: Re: [PATCH] usb:solve resume usb device identification problem
> 
> Hi,
> 
> On 07/11/2016 08:57 PM, Pengcheng Li wrote:
> > A usb device in the connection state. Then host is suspend and resume.
> > But the usb device could not be at the right speed. We should be reset
> > the reset.
> 
> Have you tried applying XHCI_RESET_ON_RESUME quirk to your host controller driver? Is your usb device self powered?
> 
I do not apply XHCI_RESET_ON_RESUME quir to my host controller driver. I select no pci platform. Our usb device is not self powered.
> Best regards,
> Lu  Baolu
> 
> >
> > Signed-off-by: Pengcheng Li <lpc.li@xxxxxxxxxxxxx>
> > ---
> >  drivers/usb/core/hub.c | 6 +++++-
> >  1 file changed, 5 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index
> > bee1351..cd71bb3 100644
> > --- a/drivers/usb/core/hub.c
> > +++ b/drivers/usb/core/hub.c
> > @@ -3455,7 +3455,7 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
> >  	struct usb_hub	*hub = usb_hub_to_struct_hub(udev->parent);
> >  	struct usb_port *port_dev = hub->ports[udev->portnum  - 1];
> >  	int		port1 = udev->portnum;
> > -	int		status;
> > +	int		status, retval;
> >  	u16		portchange, portstatus;
> >
> >  	if (!test_and_set_bit(port1, hub->child_usage_bits)) { @@ -3512,6
> > +3512,10 @@ int usb_port_resume(struct usb_device *udev, pm_message_t msg)
> >  		}
> >  	}
> >
> > +	retval = hub_port_reset(hub, port1, udev, HUB_ROOT_RESET_TIME, false);
> > +	if (retval < 0)
> > +		hub_port_disable(hub, port1, 0);
> > +
> >  	if (udev->persist_enabled)
> >  		status = wait_for_connected(udev, hub, &port1, &portchange,
> >  				&portstatus);
Best regards
Pengcheng Li
��.n��������+%������w��{.n�����{���)��jg��������ݢj����G�������j:+v���w�m������w�������h�����٥




[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux