[PATCH 16/21] usb: chipidea: msm: Restore wrapper settings after reset

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When the RESET bit is set in the USBCMD register it resets quite
a few of the wrapper's registers to their reset state. This
includes the GENCONFIG and GENCONFIG2 registers. Currently this
is done by the usb phy and ehci-msm drivers writing into the
controller wrapper's MMIO address space. Let's consolidate the
register writes into the wrapper driver instead so that we
clearly split the wrapper from the phys.

Cc: Peter Chen <peter.chen@xxxxxxx>
Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Stephen Boyd <stephen.boyd@xxxxxxxxxx>
---
 drivers/usb/chipidea/ci_hdrc_msm.c | 46 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 46 insertions(+)

diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index df0f8b31db4f..cc6f9b0df9d5 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -14,6 +14,8 @@
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
 #include <linux/io.h>
+#include <linux/extcon.h>
+#include <linux/of.h>
 
 #include "ci.h"
 
@@ -21,11 +23,22 @@
 #define HS_PHY_SEC_CTRL			0x0278
 # define HS_PHY_DIG_CLAMP_N		BIT(16)
 
+#define HS_PHY_GENCONFIG		0x009c
+# define HS_PHY_TXFIFO_IDLE_FORCE_DIS	BIT(4)
+
+#define HS_PHY_GENCONFIG_2		0x00a0
+# define HS_PHY_SESS_VLD_CTRL_EN	BIT(7)
+# define HS_PHY_ULPI_TX_PKT_EN_CLR_FIX	BIT(19)
+
+#define HSPHY_SESS_VLD_CTRL		BIT(25)
+
 struct ci_hdrc_msm {
 	struct platform_device *ci;
 	struct clk *core_clk;
 	struct clk *iface_clk;
+	struct extcon_dev *vbus_edev;
 	bool secondary_phy;
+	bool hsic;
 	void __iomem *base;
 };
 
@@ -39,9 +52,26 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
 		dev_dbg(dev, "CI_HDRC_CONTROLLER_RESET_EVENT received\n");
 		/* use AHB transactor, allow posted data writes */
 		hw_write_id_reg(ci, HS_PHY_AHB_MODE, 0xffffffff, 0x8);
+		/* workaround for rx buffer collision issue */
+		hw_write_id_reg(ci, HS_PHY_GENCONFIG,
+				HS_PHY_TXFIFO_IDLE_FORCE_DIS, 0);
+
 		if (msm_ci->secondary_phy)
 			hw_write_id_reg(ci, HS_PHY_SEC_CTRL, HS_PHY_DIG_CLAMP_N,
 					HS_PHY_DIG_CLAMP_N);
+
+		if (!msm_ci->hsic)
+			hw_write_id_reg(ci, HS_PHY_GENCONFIG_2,
+					HS_PHY_ULPI_TX_PKT_EN_CLR_FIX, 0);
+
+		if (msm_ci->vbus_edev) {
+			hw_write_id_reg(ci, HS_PHY_GENCONFIG_2,
+					HS_PHY_SESS_VLD_CTRL_EN,
+					HS_PHY_SESS_VLD_CTRL_EN);
+			hw_write(ci, OP_USBCMD, HSPHY_SESS_VLD_CTRL,
+				 HSPHY_SESS_VLD_CTRL);
+
+		}
 		break;
 	default:
 		dev_dbg(dev, "unknown ci_hdrc event\n");
@@ -112,6 +142,7 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
 	void __iomem *base;
 	resource_size_t size;
 	int ret;
+	struct device_node *ulpi_node, *phy_node;
 
 	dev_dbg(&pdev->dev, "ci_hdrc_msm_probe\n");
 
@@ -141,6 +172,13 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
 	if (!base)
 		return -ENOMEM;
 
+	ci->vbus_edev = extcon_get_edev_by_phandle(&pdev->dev, 0);
+	if (IS_ERR(ci->vbus_edev)) {
+		if (PTR_ERR(ci->vbus_edev) != -ENODEV)
+			return PTR_ERR(ci->vbus_edev);
+		ci->vbus_edev = NULL;
+	}
+
 	reset_control_assert(reset);
 	usleep_range(10000, 12000);
 	reset_control_deassert(reset);
@@ -157,6 +195,14 @@ static int ci_hdrc_msm_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_mux;
 
+	ulpi_node = of_find_node_by_name(pdev->dev.of_node, "ulpi");
+	if (ulpi_node) {
+		phy_node = of_get_next_available_child(ulpi_node, NULL);
+		ci->hsic = of_device_is_compatible(phy_node, "qcom,usb-hsic-phy");
+		of_node_put(phy_node);
+	}
+	of_node_put(ulpi_node);
+
 	plat_ci = ci_hdrc_add_device(&pdev->dev, pdev->resource,
 				     pdev->num_resources, &ci_hdrc_msm_platdata);
 	if (IS_ERR(plat_ci)) {
-- 
2.9.0.rc2.8.ga28705d

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux