On 17/06/2016 at 13:44:22 +0000, Yang, Wenyou wrote : > Hi Alexandre, > > > -----Original Message----- > > From: Alexandre Belloni [mailto:alexandre.belloni@xxxxxxxxxxxxxxxxxx] > > Sent: 2016年6月9日 4:38 > > To: Rob Herring <robh@xxxxxxxxxx> > > Cc: Yang, Wenyou <Wenyou.Yang@xxxxxxxxx>; Alan Stern > > <stern@xxxxxxxxxxxxxxxxxxx>; Greg Kroah-Hartman > > <gregkh@xxxxxxxxxxxxxxxxxxx>; Ferre, Nicolas <Nicolas.FERRE@xxxxxxxxx>; > > Pawel Moll <pawel.moll@xxxxxxx>; Mark Brown <broonie@xxxxxxxxxx>; Ian > > Campbell <ijc+devicetree@xxxxxxxxxxxxxx>; Kumar Gala <galak@xxxxxxxxxxxxxx>; > > linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-arm- > > kernel@xxxxxxxxxxxxxxxxxxx; linux-usb@xxxxxxxxxxxxxxx > > Subject: Re: [PATCH v3 1/2] usb: ohci-at91: Forcibly suspend ports while USB > > suspend > > > > On 08/06/2016 at 15:26:51 -0500, Rob Herring wrote : > > > On Wed, Jun 08, 2016 at 12:15:10PM +0800, Wenyou Yang wrote: > > > > In order to the save power consumption, as a workaround, suspend > > > > forcibly the USB PORTA/B/C via set the SUSPEND_A/B/C bits of OHCI > > > > Interrupt Configuration Register in the SFRs while OHCI USB suspend. > > > > > > > > This suspend operation must be done before the USB clock is > > > > disabled, resume after the USB clock is enabled. > > > > > > > > Signed-off-by: Wenyou Yang <wenyou.yang@xxxxxxxxx> > > > > --- > > > > > > > > Changes in v3: > > > > - Change the compatible description for more precise. > > > > > > > > Changes in v2: > > > > - Add compatible to support forcibly suspend the ports. > > > > - Add soc/at91/at91_sfr.h to accommodate the defines. > > > > - Add error checking for .sfr_regmap. > > > > - Remove unnecessary regmap_read() statement. > > > > > > > > .../devicetree/bindings/usb/atmel-usb.txt | 6 +- > > > > drivers/usb/host/ohci-at91.c | 80 +++++++++++++++++++++- > > > > include/soc/at91/at91_sfr.h | 29 ++++++++ > > > > 3 files changed, 112 insertions(+), 3 deletions(-) create mode > > > > 100644 include/soc/at91/at91_sfr.h > > > > > > > > diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt > > > > b/Documentation/devicetree/bindings/usb/atmel-usb.txt > > > > index 5883b73..888deaa 100644 > > > > --- a/Documentation/devicetree/bindings/usb/atmel-usb.txt > > > > +++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt > > > > @@ -3,8 +3,10 @@ Atmel SOC USB controllers OHCI > > > > > > > > Required properties: > > > > - - compatible: Should be "atmel,at91rm9200-ohci" for USB controllers > > > > - used in host mode. > > > > + - compatible: Should be one of the following > > > > + "atmel,at91rm9200-ohci" for USB controllers used in host mode. > > > > + "atmel,sama5d2-ohci" for USB controllers used in host mode > > > > + on SAMA5D2 which can force to suspend. > > > > > > Guess I wasn't clear enough before. Drop "which can force to suspend". > > > > > > > Well, my point is that we don't need a new compatible anyway. > > Could you give some advice?. > Sure, what I mean is that you can try to get the regmap for the SFR in every case. Depending on whether you were able to get it, you can decide to call ohci_at91_port_suspend/resume or not (just test for sfr_regmap != NULL). -- Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
